100% found this document useful (1 vote)
665 views

Computer Hardware Servicing: Module 3, Lesson 2: Install Equipment/ Devices and Systems

This document discusses safety precautions for installing computer equipment and systems. It describes personal protective equipment like goggles, rubber sole shoes, aprons, face masks and gloves. It also discusses anti-static safety rules, including using an anti-static wrist strap when working, grounding oneself before touching components, and handling parts by the edges. The document provides a quiz to test understanding of these safety procedures.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
665 views

Computer Hardware Servicing: Module 3, Lesson 2: Install Equipment/ Devices and Systems

This document discusses safety precautions for installing computer equipment and systems. It describes personal protective equipment like goggles, rubber sole shoes, aprons, face masks and gloves. It also discusses anti-static safety rules, including using an anti-static wrist strap when working, grounding oneself before touching components, and handling parts by the edges. The document provides a quiz to test understanding of these safety procedures.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 33

ICT 9:

Computer Hardware Servicing


Module 3, Lesson 2: Install Equipment/ Devices and Systems
SAFETY PRECAUTIONS
This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3, Lesson 2: computer configuration set up. At the end
Install Equipment/ Devices
and Systems of this lesson you should be able to:
a) Apply OHS procedures in installing
SAFETY PRECAUTIONS devices, systems, networking devices,
and peripherals;
b) Comply with the requirements in
installing devices,/systems, networking
devices, and peripherals;
This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3, Lesson 2: computer configuration set up. At the end
Install Equipment/ Devices
and Systems of this lesson you should be able to:
c) Install computer systems, networking
SAFETY PRECAUTIONS devices and peripherals in accordance
with job requirements;
d) Perform variations in installing devices
and systems in accordance with
customer/client’s requirements;
This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3, Lesson 2: computer configuration set up. At the end
Install Equipment/ Devices
and Systems of this lesson you should be able to:
e) Obtain approval from appropriate
SAFETY PRECAUTIONS personnel before implementing
contingency procedures;

f) Respond to unplanned events or


conditions in accordance to established
procedures; and
This lesson is designed to give you the
proper procedures used in installing
devices and operating system of a personal
computer, alongside with it is the basic
Module 3, Lesson 2: computer configuration set up. At the end
Install Equipment/ Devices
and Systems of this lesson you should be able to:
g) Check the quality of the work
SAFETY PRECAUTIONS undertaken in accordance with the
established procedures.
Personal Protective Equipment
 refers to protective clothing, helmets,
goggles, or other gear designed to protect
the wearer's body or clothing from injury
Module 3, Lesson 2:
Install Equipment/ Devices by electrical hazards, heat, chemicals,
and Systems and infection, for job-related occupational
safety and health purposes.
SAFETY PRECAUTIONS
Personal Protective Equipment
 PPE can also be used to protect the
working environment from pesticide
application, pollution or infection from
Module 3, Lesson 2:
Install Equipment/ Devices the worker (for example in a microchip
and Systems factory).

SAFETY PRECAUTIONS  It is important that students and


teachers during their laboratory period
should be required to use personal
protective equipment.
Personal Protective Equipment
 Some of these are:
 Goggles
A large spectacles, with shields around the rims,
Module 3, Lesson 2: for protecting the eyes from dust, excessive light,
Install Equipment/ Devices wind, etc.
and Systems

SAFETY PRECAUTIONS
Personal Protective Equipment
 Some of these are:
 Rubber Sole Shoes
A special type of shoes used to prevent electrical
Module 3, Lesson 2: shock and for waterproofing and insulating
Install Equipment/ Devices purposes.
and Systems

SAFETY PRECAUTIONS
Personal Protective Equipment
 Some of these are:
 Apron
A garment worn over the front of the body
Module 3, Lesson 2: as a protection for one’s cloth.
Install Equipment/ Devices
and Systems

SAFETY PRECAUTIONS
Personal Protective Equipment
 Some of these are:
 Face Mask
A covering for the face to prevent the inhaling or
Module 3, Lesson 2: absorbing dust and other chemicals
Install Equipment/ Devices
and Systems

SAFETY PRECAUTIONS
Personal Protective Equipment
 Some of these are:
 Gloves
The covering material with a separate sheath for
Module 3, Lesson 2: each finger used for hand protection.
Install Equipment/ Devices
and Systems

SAFETY PRECAUTIONS
Anti-Static and Safety Precautions
 Static electricity is the discharge of
electricity between two objects with
different electrical potential.
Module 3, Lesson 2:
Install Equipment/ Devices  Humans can't feel a static shock until it
and Systems is several thousand volts strong, but it
SAFETY PRECAUTIONS takes less than 30 volts to fry a sensitive
computer component, such as a stick of
RAM or a processor.
Anti-Static and Safety Precautions
 That's why computer technicians and
home computer builders have to guard
their computers against the deadly
Module 3, Lesson 2:
Install Equipment/ Devices ravages of static electricity, as well as
and Systems take steps to avoid injury.

SAFETY PRECAUTIONS
Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always use an anti-static wrist strap
Module 3, Lesson 2: when working on a computer (except
Install Equipment/ Devices when working on monitors)
and Systems
 Always disconnect a computer from the
SAFETY PRECAUTIONS AC power and from any powered
peripherals while you are working on it.
Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always grasp a metal part of the
Module 3, Lesson 2: computer chassis with your bare hand
Install Equipment/ Devices before you touch anything inside. Do this
and Systems even if you are wearing an anti-static
SAFETY PRECAUTIONS wristband.
Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always handle electronic components by
Module 3, Lesson 2: a non-conducting (non-metallic) edge.
Install Equipment/ Devices Don't touch the pins or other connectors.
and Systems
 Never plug an ATX power supply into AC
SAFETY PRECAUTIONS power unless it is connected either to a
computer's motherboard or to a dummy
test load.
Anti-Static and Safety Precautions
Safety and Anti-Static Rules
 Always use a UL-approved surge
Module 3, Lesson 2: protector or an Uninterruptible Power
Install Equipment/ Devices Supply that incorporates surge and spike
and Systems protection.
SAFETY PRECAUTIONS  Never eat, drink, or smoke while working
on a computer.
Module 3, Lesson 2:
Install Equipment/ Devices
and Systems
QUIZ
SAFETY PRECAUTIONS
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
1. Always disconnect a computer from the
SAFETY PRECAUTIONS
AC power and from any powered
peripherals while you are working on it.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
2. Always grasp a metal part of the
SAFETY PRECAUTIONS
computer chassis with your bare hand
before you touch anything inside. Do
this even if you are wearing an anti-
static wristband.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
3. Always handle electronic components by
SAFETY PRECAUTIONS
a non-conducting (non-metallic) edge.
Don't touch the pins or other connectors.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
4. Always use a UL-approved surge
SAFETY PRECAUTIONS
protector or an Uninterruptible Power
Supply that incorporates surge and
spike protection.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
5. Never use an anti-static wrist strap
SAFETY PRECAUTIONS
when working on a computer (except
when working on monitors
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
6. Everyone is allowed to eat, drink, or
SAFETY PRECAUTIONS
smoke while working on a computer.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
7. Never plug an ATX power supply into
SAFETY PRECAUTIONS
AC power unless it is connected either to
a computer's motherboard or to a
dummy test load.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
8. Static electricity is the discharge of
SAFETY PRECAUTIONS
electricity between two objects with
different electrical potential.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
9. Apron is a garment worn over the front
SAFETY PRECAUTIONS
of the body as a protection for one’s
cloth.
QUIZ
True or False
Direction: Write TRUE if the statement is
Module 3, Lesson 2: correct and FALSE otherwise.
Install Equipment/ Devices
and Systems
10. PPE can also be used to protect the
SAFETY PRECAUTIONS
working environment from pesticide
application, pollution or infection from
the worker.
Module 3, Lesson 2:
Install Equipment/ Devices
and Systems
ACTIVITY
SAFETY PRECAUTIONS
ACTIVITY
Directions:
The class will be divided into five (5)
Module 3, Lesson 2: groups.
Install Equipment/ Devices Each group has its own respective leader.
and Systems
The group will perform a task regarding
SAFETY PRECAUTIONS
familiarizing the personal protective
equipment.
ACTIVITY

Module 3, Lesson 2:
Install Equipment/ Devices
and Systems

SAFETY PRECAUTIONS
End of
Module 3, Lesson 2:
Module 3, Lesson 2:
Install Equipment/ Devices Install Equipment/ Devices
and Systems
and Systems
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS

You might also like