0% found this document useful (0 votes)
107 views26 pages

Module 4

This document outlines a 60-hour module on diagnosing and troubleshooting computer systems. It includes 4 major topics: 1) planning and preparing for diagnosis of computer errors, 2) diagnosing and configuring computer systems and networks, 3) inspecting and testing configured systems and networks, and 4) testing systems and networks. It also includes learning outcomes for each topic, such as following safety procedures, identifying errors, and configuring systems based on specifications. Finally, it includes a pre-diagnostic assessment to evaluate knowledge in areas like installing equipment, checking configurations, and diagnosing faults.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
107 views26 pages

Module 4

This document outlines a 60-hour module on diagnosing and troubleshooting computer systems. It includes 4 major topics: 1) planning and preparing for diagnosis of computer errors, 2) diagnosing and configuring computer systems and networks, 3) inspecting and testing configured systems and networks, and 4) testing systems and networks. It also includes learning outcomes for each topic, such as following safety procedures, identifying errors, and configuring systems based on specifications. Finally, it includes a pre-diagnostic assessment to evaluate knowledge in areas like installing equipment, checking configurations, and diagnosing faults.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 26

Module 4: DIAGNOSE AND TROUBLESHOOT

COMPUTER SYSTEMS (DT)


Number of Sessions (Time Allotment): 60 hrs
Content Standard
The learner demonstrates understanding of the underlying
concepts and principles on diagnosing and troubleshooting
of computer systems.
Performance Standard
The learner independently diagnoses and troubleshoots
computer systems as prescribed in the TESDA Training
Regulation.
Prepared by LMCadapan KNHS2017 11/17/2017 2
In this module, there will be four (4) major topics that you
will encounter:
1. Plan and prepare diagnosis of computer system errors;
2. Diagnose and configure computer systems and networks;
3. Inspect and test the configured computer systems and
networks ; and
4. Test systems and networks.

Prepared by LMCadapan KNHS2017 11/17/2017 3


LO 1. Plan and prepare for diagnosis of computer systems
errors
 Follow OHS procedures in planning and preparing
diagnosis of computer systems errors
 Determine the computer systems errors using manual and
software diagnosis

Prepared by LMCadapan KNHS2017 11/17/2017 4


LO 2. Diagnose and configure computer systems and
networks
 Follow OHS procedures in planning and preparing
diagnosis of computer systems and network errors
 Identify the diagnosed computer systems and network
errors based on the job requirements
 Configure computer systems and networks

Prepared by LMCadapan KNHS2017 11/17/2017 5


LO 3. Inspect and test the configured computer systems and networks
 Follow OHS procedures in inspecting and testing configured
computer systems and networks
 Inspect configured computer systems and networks
 Replace defective components
 Reinstall defective computer systems
 Identify networks errors
 Repair networks errors based on standard procedures
 Test the configured computer systems and networks
Prepared by LMCadapan KNHS2017 11/17/2017 6
LO 4. Test Systems and Networks
 Follow OHS procedures in testing systems and networks
 Test computer systems and networks in accordance with
the job requirements
 Accomplish technical reports on the tests conducted

Prepared by LMCadapan KNHS2017 11/17/2017 7


PRE-DIAGNOSTIC/ASSESSMENT

Prepared by LMCadapan KNHS2017 11/17/2017 8


PRE-DIAGNOSTIC/ASSESSMENT

Direction:
Read each of the statements in the left-hand column of the
chart.
Place a check on the column that indicates your answers.

Prepared by LMCadapan KNHS2017 11/17/2017 9


PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
1. Plan and prepare work to ensure
occupational health and safety (OHS)
policies and procedures are followed.
Prepared by LMCadapan KNHS2017 11/17/2017 10
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
2. Obtain materials, tools, equipment and
testing devices needed to conform with
job requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 11
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
3. Interpret work instructions according
to job requirements.

Prepared by LMCadapan KNHS2017 11/17/2017 12


PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
4. Obtain computer components/
devices/systems and determines its
location prior to installation.
Prepared by LMCadapan KNHS2017 11/17/2017 13
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
5. Install equipment/devices/systems in
accordance with job requirements.

Prepared by LMCadapan KNHS2017 11/17/2017 14


PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
6. Check/Test devices/systems and/or
installations to determine the
conformity to job requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 15
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
7. Check computer systems and networks
for configuration in accordance with
specifications and requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 16
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
8. Diagnose fault or problem in the
computer systems and networks in line
with standard operating procedures.
Prepared by LMCadapan KNHS2017 11/17/2017 17
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
9. Configure the identified systems and
networks based on specifications and
job requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 18
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
10. Inspect and test configured computer
systems and networks in conformity with
manufacturer's instructions/manual.
Prepared by LMCadapan KNHS2017 11/17/2017 19
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
11. Correct/Adjust components or parts of
computer systems and networks in
accordance with job requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 20
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
12. Test computer systems and networks
to ensure safe operation.

Prepared by LMCadapan KNHS2017 11/17/2017 21


PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
13. Perform scheduled/periodic
maintenance in accordance with
manufacturer's requirements.
Prepared by LMCadapan KNHS2017 11/17/2017 22
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
14. Make needed repairs/replacements in
accordance with established
procedures, when necessary.
Prepared by LMCadapan KNHS2017 11/17/2017 23
PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
15. Document tasks undertaken in
accordance with SOP.

Prepared by LMCadapan KNHS2017 11/17/2017 24


PRE-DIAGNOSTIC/ASSESSMENT

Knowledge at
Have a Little
Knowledge-

Knowledge
able

No

all
16. Clean and clear worksite of all
surplus/excess materials in
accordance with company SOP.
Prepared by LMCadapan KNHS2017 11/17/2017 25
END OF
PRE-DIAGNOSTIC/ASSESSMENT

Prepared by LMCadapan KNHS2017 11/17/2017 26

You might also like