Operating Temperature -45°C to 85°C • high IP3, 32 dBm typ. CASE STYLE: TTT881 Storage Temperature -55°C to 100°C • excellent L-R isolation, 55 dB typ.; LO Power +19 dBm L-I isolation, 38 dB typ. +RoHS Compliant RF Power +20 dBm The +Suffix identifies RoHS Compliance. See our web site Permanent damage may occur if any of these limits are exceeded. for RoHS Compliance methodologies and qualifications Pin Connections Applications LO 2 • base stations and Reel Available Tape cost RF 1 • communication systems at no extra • wireless application in Health care Reel Size Devices/Reel IF 3 7” 10, 20, 50, 100, 200 • weather instruments/radar/satellites 13” 500 GROUND 4,5,6 • general aviation air to ground telephone • land mobile radio Outline Drawing Electrical Specifications FREQUENCY CONVERSION LOSS RF in IP3 LO-RF LO-IF (MHz) (dB) at 1dB (dBm) ISOLATION ISOLATION Compr (dB) (dB) (dBm) RF LO IF Typ. σ Max. Typ. Typ. Typ. Min. Typ. Min.
Frequency Conversion Isolation Isolation VSWR VSWR IP3 Loss (dB) L-R L-I RF Port LO Port (dBm)
Suggested Layout, RF LO LO LO LO LO LO LO Tolerance to be within ±.002 MHz MHz +17dBm +17dBm +17dBm +17dBm +17dBm +17dBm 345.00 395.10 6.36 52.91 34.97 1.40 1.76 32.12 Outline Dimensions ( inch mm ) 354.00 404.10 6.34 53.27 34.94 1.38 1.57 41.07 A B C D E F G H J K 363.00 413.10 6.34 53.37 34.97 1.36 1.39 39.39 .38 .50 .23 .020 .075 .250 .425 .187 .050 .050 372.00 422.10 6.31 53.19 34.66 1.37 1.23 32.40 9.65 12.70 5.84 0.51 1.91 6.35 10.80 4.75 1.27 1.27 381.00 431.10 6.30 53.18 34.99 1.38 1.10 34.22
L M N P Q R S T wt. 390.00 440.10 6.33 53.53 35.06 1.39 1.09 35.61 .070 .270 .540 .060 .095 .445 .208 .415 grams 399.00 449.10 6.30 54.14 35.88 1.43 1.22 35.58 408.00 458.10 6.29 54.70 36.24 1.45 1.36 32.77 1.78 6.86 13.72 1.52 2.41 11.30 5.28 10.54 0.8 417.00 467.10 6.26 54.91 36.59 1.48 1.52 32.19 426.00 476.10 6.29 55.95 37.44 1.54 1.68 34.37
REV. A Notes M151107 A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. ED-13554/1 C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled HJK-481H+ to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp WL/AM 150729 Mini-Circuits ® Page 1 of 2
Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Page 2 of 2
