lm317 PDF

Bay Linear
Inspire the Linear Power
3-Terminal 1.5Amp Adjustable Voltage Regulator LM317
Description Features
• Output Current of 1.5A
The Bay Linear LM317 are monolithic integrated circuit in • Output Voltage Tolerance of 5%
TO- 220, TO-252, SOT-223 and D2PAK packages intended
for use as positive adjustable voltage regulators.
• Adjustable Output 1.2V to 37V
• 0.1% Load & Line Regulation
They are designed to supply more than 1.5A of load current • Internal Short-Circuit Limited
with an output voltage adjustable over a 1.2 to 37V range. • Current Limit
• Offer in plastic TO-252, TO-220, SOT-223
The nominal output voltage is selected by means of only a & TO-263
resistive divider, making the device exceptionally easy to use
and eliminating the stocking of many fixed regulators.
• Direct Replacement for LM317
Applications
• Post regulator for switching DC/DC
converter
• Bias supply for analog circuits
Packaging Information Ordering Information
Device Package Type Output

LM317T TO-220 1.5 Amp
LM317N SOT-223 1.0 Amp
LM317S TO-263 1.5 Amp
LM317D TO-252 1.5 Amp
TO-263-3 (S)
(
1. ADJ SOT-223 Vs. TO-252 Package

Bay Linear 2. Output
1 2 3 3. Input
Top View
Bay Linear, Inc 2418 Armstrong Street, Livermore, CA 94550 Tel: (925) 606-5950, Fax: (925) 940-9556 www.baylinear.com
LM317
Absolute Maximum Rating
Parameter LM317 Unit
Power Dissipation Internally Limited
Input Voltage Differential +40V, -0.3V V
Operating Free-Air, Case, Virtual Junction Temp. 0 to 150 °C
Storage Temperature Range -65 to 150
Lead temperature 1.6 mm from case for sec. 260
Electrical Characteristics (LM317)
Parameter Symbol Conditions MIN TYP MAX UNIT

Reference Voltage VO 3V≤(VIN-VOUT) ≤40V 1.20 1.25 1.30 V
10mA≤IOUT≤IMAX, P≤PMAX
Line Regulation ∆VO 3V≤(VIN-VOUT) ≤40V (Note 4) 0.01 0.02 %/V
0.02 0.05
Load Regulation ∆VO 10mA≤IOUT ≤IMAX (Note 4) 0.1 0.3 %
0.3 1 %
Ripple Rejection RR VI = 10V,, f=120Hz 65 dB
CADJ=0µF
VI = 10V,, f=120Hz 66 80 dB
CADJ=10µF
Thermal Regulation 20ms 0.03 0.07 %W
Adjustment Pin 50 100 µA
Current
Adjustment Pin 10mA≤IOUT≤IMAX, 0.2 5 µA
Current Change 3V≤(VIN-VOUT) ≤40V
Temperature Stability TMIN≤TJ≤TMAX 1 %
Long Term Stability TJ=125°C, 1000 hrs 0.3 1 %
RMS Output Noise % 10Hz≤f≤10KHz 0.003 %
of VOUT
Minimum Load (VIN-VOUT) =40V 3.5 5 mA
Current
Maximum Load (VIN-VOUT) ≤15V 1.5 2.2 A
Current PD≤PMAX
(VIN-VOUT) ≤40V 0.4 A
PD≤PMAX
LM317
Application Notes: to improve the ripple rejection of about 15 dB (
CADJ).
The LM317 provides an internal reference
voltage of 1.25V between the output and An 1µF tantalium ( or 25 µFAluminium
adjustments terminals. This is used to set a electrolitic) capacitor on the output to improve
constant current flow across an external resistor transient response. In additional to external
divider show below, giving an output voltage capacitors, it is good practice to add protection
VO of: diodes, as shown in below.
VO = VREF ( 1 + R 2 R 1 ) + IADJ R2 D1 protect the device against input short circuit,

while D2 protect against output short circuit for
The device was designed to minimize the term capacitance discharging.
IADJ ( 100 m A max) and to maintain it very
constant with line and load changes. Usually,
the error term IADJ V R2 can be neglected. To
obtain the previous requirement, all the
regulator quiescent current is returned to the
output terminal, imposing a minimum load
current condition. If the load is insufficient, the
output voltage will rise. Since the LM317 is a
floating regulator and ” sees” only the input- to-
output differential voltage, supplies of very high
voltage with respect to ground can be regulated
as long as the maximum input- to- output
differential is not exceeded. Furthermore,
programmable regulator are easily obtainable
and, by connecting a fixed resistor between the
adjustment and output, the device can be used as
a precision current regulator. In order to
optimise the load regulation, the current set
resistor R1 show below should be tied as close
as possible to the regulator, while the ground
terminal of R2 should be near the ground of the
load to provide remote ground sensing.
Performance may be improved with added
capacitance as follow:
An input bypass capacitor of 0.1µF
An adjustment terminal to ground 10µF

capacitor
Advance Information- These data sheets contain descriptions of products that are in development. The specifications are based on the engineering calculations,
computer simulations and/ or initial prototype evaluation.
Preliminary Information- These data sheets contain minimum and maximum specifications that are based on the initial device characterizations. These limits are
subject to change upon the completion of the full characterization over the specified temperature and supply voltage ranges.
The application circuit examples are only to explain the representative applications of the devices and are not intended to guarantee any circuit
design or permit any industrial property right to other rights to execute. Bay Linear takes no responsibility for any problems related to any
industrial property right resulting from the use of the contents shown in the data book. Typical parameters can and do vary in different
applications. Customer’s technical experts must validate all operating parameters including “ Typical” for each customer application.
LIFE SUPPORT AND NUCLEAR POLICY
Bay Linear products are not authorized for and should not be used within life support systems which are intended for surgical
implants into the body to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without
the specific written consent of Bay Linear President.
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.

lm317 PDF

Uploaded by

Copyright:

Available Formats

lm317 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

lm317 PDF

Uploaded by

Copyright:

Available Formats

Bay Linear

Inspire the Linear Power

3-Terminal 1.5Amp Adjustable Voltage Regulator LM317

Packaging Information Ordering Information

Device Package Type Output

1. ADJ SOT-223 Vs. TO-252 Package

Electrical Characteristics (LM317)

Parameter Symbol Conditions MIN TYP MAX UNIT

VO = VREF ( 1 + R 2 R 1 ) + IADJ R2 D1 protect the device against input short circuit,

An input bypass capacitor of 0.1µF

An adjustment terminal to ground 10µF

LIFE SUPPORT AND NUCLEAR POLICY

Datasheets for electronics components.

You might also like