Modern Periodic Table

CHEM1101: CHEMISTRY (EEE/CoE) LECTURE 3
MODERN PERIODIC TABLE
Development of the Periodic Table:
In 1869 the Russian chemist Dmitri Mendeleev (1834–1907) and the German chemist J.
Lothar Meyer (1830–1895), working independently, made similar discoveries. They found
that when they arranged the elements in order of atomic mass, they could place them in
horizontal rows, one row under the other, so that the elements in each vertical column have
similar properties. A tabular arrangement of elements in rows and columns, highlighting the
regular repetition of properties of the elements, is called a periodic table.
Eventually, more accurate determinations of atomic masses revealed discrepancies in this

ordering of the elements. When the elements in the periodic table are ordered by atomic
number, such discrepancies vanish. In modern version of the periodic table, each entry lists
the atomic number, atomic symbol, and atomic mass of an element.
Mendeleev's Statement of the Law of Periodicity: The properties of elements are a periodic
function of their atomic weight, i.e., if the elements are arranged in the increasing order of
their atomic weight, the properties of the elements (i.e. similar elements) are repeated after
definite regular intervals or periods.
Modern Statement of the Law of Periodicity (Moseley): The properties of elements are a
periodic function of their atomic numbers, i.e. if the elements are arranged in the increasing
order of their atomic numbers, the properties of the elements (i.e. similar elements) are
repeated after definite regular intervals or periods.
Patterns in the Periodic Table: Main Features

1. The basic structure of the periodic table is its division into rows and columns.
2. The columns are called groups. The groups are divided into two sub groups: A and B.
These are numbered IA, IIA, IIIB, IVB, VB, VIB, VIIB, VIIIB, IB, IIB, IIIA, IVA,
VA, VIA, VIIA and VIIIA (0) groups. The number of valence electrons equals the
Group number. All the members of a Group have the same valence configuration but
different principal quantum numbers. Elements within a group share several common
properties.
3. The rows are called periods (hence periodic table). There are seven periods in periodic
table. The period number of an element signifies the highest unexcited energy level
for an electron in that element. The period number equals the principal quantum
number of the valence shell.
4. Group 1 is called The Alkali Metals. They are highly reactive and have a +1 charge.
5. Group 2 is called The Alkaline Earth Metals. They have +2 charge.
6. Transition metals are in the middle, they have groups from IB to VIIIB.
7. The inner transition metals are at the bottom- as lanthanides and actinides.
8. Group 7 is called the Halogens. They are also highly reactive and have a -1 charge.
9. Group VIIIA or zero is called the Noble Gases/ Inert Gases.
10. Hydrogen occupies a unique position at the top of the periodic table. It does not fit
naturally into any Group. It has a single positive charge, like the alkali metals, but at
room temperature, it is a gas that doesn't act like a metal.
11. The elements in group VIIIB consist of three groups of elements at the middle of the
periodic table. They contain triads, which are metals with very similar properties,
usually found together.
Modern Periodic Table (Updated on May, 2018) Page 1

CLASSIFICATION OF ELEMENTS
Classification of the elements into BLOCKS:
1. The s-block elements have valence configuration s1 or s2.

2. The p-block elements have valence configuration s2p1 to s2p6.
3. The d-block elements have valence configurations in which d-subshells are being
filled.
4. The f-block elements have valence configurations in which f-subshells are being
filled.
Classification of elements depending on electronic configuration:
The physical and chemical properties of the elements are largely determined by their
electronic structures:
1. The Inert Gases (elements of ‘0’ group)

2. The Representative Elements (‘s’ and ‘p’ block elements)
3. The Transition Elements (‘d’ block elements)
4. The Inner Transition Elements (‘f’ block elements)
Classification of elements into Metals, Nonmetals and Metalloids:
Metals: Most elements are metals. There are so many metals, they are divided into groups:
alkali metals, alkaline earth metals, transition metals and inner transition metals. The inner
transition metals can be divided into smaller groups, such as the lanthanides and actinides.
Properties of Metals: Metals share some common properties. They are lustrous (shiny),
malleable (can be hammered into sheets) and ductile (can be drawn into wire), and are good
conductors of heat and electricity. Except for mercury, the metallic elements are solids at
room temperature (about 200C). These properties result from the ability to easily move the
electrons in the outer shells of metal atoms.
Group IA: Alkali Metals (Li, Na, K, Rb, Cs, Fr)
The alkali metals are located in Group IA (first column) of the periodic table. Alkali metals
form salts and many other compounds. These elements are less dense than other metals, form
ions with a +1 charge, and have the largest atom sizes of elements in their periods. The alkali
metals are highly reactive.
Group IIA: Alkaline Earth Metals (Be, Mg, Ca, Sr, Ba, Ra)
The alkaline earths are located in Group IIA (second column) of the periodic table. Calcium
and magnesium are examples of alkaline earths. These metals form many compounds. They
have ions with a +2 charge. Their atoms are smaller than those of the alkali metals.

Group IB-VIII: Transition Metals
The transition elements are located in groups IB to VIIIB. Iron and gold are examples of
transition metals. These elements are very hard, with high melting points and boiling points.
The transition metals are good electrical conductors and are very malleable. They show
positive oxidation states of +2 and +3 generally and contain two incomplete energy levels (‘s’
& ‘d’ orbitals). They are effective catalytic agents and generally form coloured and complex
compounds.
The transition metals include most of the elements, so they can be categorized into smaller
groups. The lanthanides and actinides are classes of transition elements. Another way to
group transition metals is into triads, which are metals with very similar properties, usually
found together.
Group VIIIB: Metal Triads: The iron triad consists of iron, cobalt, and nickel. Just under
iron, cobalt, and nickel is the palladium triad of ruthenium, rhodium, and palladium, while
under them is the platinum triad of osmium, iridium, and platinum.
Lanthanides and Actinides
When you look at the periodic table, you'll see there is a block of two rows of elements below
the main body of the chart. The top row has atomic numbers following lanthanum. These
elements are called the lanthanides (rare earths). The lanthanides are silvery metals that
tarnish easily. They are relatively soft metals, with high melting and boiling points. The
lanthanides react to form many different compounds. These elements are used in lamps,
magnets, lasers, and to improve the properties of other metals.
The actinides are in the row below the lanthanides (trans-uranium). Their atomic numbers
follow actinium. All of the actinides are radioactive, with positively charged ions. They are
reactive metals that form compounds with most nonmetals. The actinides are used in
medicines and nuclear devices.
These elements have three incomplete outer levels (‘s’, ‘d’ & ‘f’ orbitals) and their properties
are similar to as in the case of transition elements.
Nonmetals & Metalloids
A nonmetal is an element that does not exhibit the characteristics of a metal. Most of the
nonmetals are gases (for example, chlorine and oxygen) or solids (for example, phosphorus
and sulfur). The solid nonmetals are usually hard, lack metallic luster, brittle substances.
Bromine is the only liquid nonmetal. The halogens and the noble gases are two groups of
nonmetals.
Metalloids, or semimetals (B, Si, Ge, As, Sb, Te, Bi, Po), are elements having both metallic
and nonmetallic properties. These elements, such as silicon (Si) and germanium (Ge), are
usually good semiconductors—elements that, when pure, are poor conductors of electricity at
room temperature but become moderately good conductors at higher temperatures.

Halogens (F, Cl, Br, I, At): Halogens are located in Group VIIA of the periodic table.
Examples of halogens are chlorine and iodine. You find these elements in bleaches,
disinfectants, and salts. These nonmetals form ions with a -1 charge. The physical properties
of the halogens vary. The halogens are highly reactive.
Noble Gases (He, Ne, Ar, Kr, Xe, Rn): The noble gases are located in Group VIII of the
periodic table. Helium and neon are examples of noble gases. These elements are used to
make lighted signs, refrigerants, and lasers. The noble gases are not reactive. Inactivity of the
noble gases is due to- (a) complete pairing of all electrons present, (b) absence of any
molecular orbital, (c) stable energy state, (d) very high ionization potential and (e) negligible
electron affinities.
Usefulness & Limitations of the periodic table
Usefulness are- (1) Classification of the elements, (2) Prediction of undiscovered elements,
(3) Correction of atomic weight, (4) Periodic table in industrial research etc.
Limitations are- (1) Position of hydrogen, (2) The position of Lanthanides and Actinides, (3)
Properties which are not periodic functions, (4) Diagonal relationship etc.

Modern Periodic Table

Uploaded by

Copyright:

Available Formats

Modern Periodic Table

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Modern Periodic Table

Uploaded by

Copyright:

Available Formats

CHEM1101: CHEMISTRY (EEE/CoE) LECTURE 3

MODERN PERIODIC TABLE

Development of the Periodic Table:

Eventually, more accurate determinations of atomic masses revealed discrepancies in this

Patterns in the Periodic Table: Main Features

Modern Periodic Table (Updated on May, 2018) Page 1

Classification of the elements into BLOCKS:

1. The s-block elements have valence configuration s1 or s2.

Classification of elements depending on electronic configuration:

1. The Inert Gases (elements of ‘0’ group)

Classification of elements into Metals, Nonmetals and Metalloids:

Group IA: Alkali Metals (Li, Na, K, Rb, Cs, Fr)

Modern Periodic Table (Updated on May, 2018) Page 2

Group IB-VIII: Transition Metals

Lanthanides and Actinides

Nonmetals & Metalloids

Modern Periodic Table (Updated on May, 2018) Page 3

Usefulness & Limitations of the periodic table

Modern Periodic Table (Updated on May, 2018) Page 4

You might also like