Scribd Logo
Upload

Welcome to Scribd!

  • 136 views

    Meyco MP 357 GS PDF

    Uploaded by

    Francois-

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Meyco MP 357 GS PDF

    Uploaded by

    Francois-
    136 views2 pages

    Original Title

    MEYCO MP 357 GS.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    136 views2 pages

    Meyco MP 357 GS PDF

    Uploaded by

    Francois-

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MEYCO® MP 357 GS 26/10/05

    Highly reactive, two component hydrophobic polyurethane injection


    resin for ground stabilisation

    Product description Technical data


    ®
    MEYCO MP 357 GS is a two component,
    Viscosity Density
    solvent-free polyurethane injection resin Colour
    mPa.s kg/l
    specifically designed for rapid stabilisation of rock Component A Dark yellow 300 1.010
    strata and soils. Component B Dark brown 200 1.230
    Tested at 23ºC
    Fields of application
    Flash point: A & B separately: > 200ºC
    • Stabilisation of coal measures and rock strata
    • Consolidation of fractured rock, sands and Mix ratio A:B: 1:1 by volume (100 :123 by weight)
    gravels and land-fill materials
    • Repair of concrete cracks Reaction characteristics:
    Testing temp. 23°C
    Features and benefits Mix viscosity after 25s <600 mPa.s
    • Fast reacting material applied where Start of foaming 45s ± 10s
    structural strength and flexibility is required, End of foaming 65s ± 5s
    both in dry and wet conditions Foam expansion factor 3
    • MEYCO® MP 357 GS reacts and expands in Flexural adhesive strength 4.0 N/mm²
    volume without being in contact with water, Border time <30 min
    having a foam factor 3 Border time: Time needed to reach 1 MPa
    • Penetrates cracks wider than 0.15 mm adhesive strength in lab conditions
    • When in contact with water, the foam factor
    may increase to about 8 Reaction temperature graph:
    • Not recommended for water stopping. If water M EYCO PUR Injection systems
    stopping is required we recommend to use
    MEYCO® MP 355 A3 or MEYCO® MP 355 1K.
    140

    (Please refer to our product documentation) 120

    100

    Packaging 80
    Temp/°C

    MEYCO® MP 357 GS is available in the following 60


    MEYCO MP 357 GS

    packaging:
    40

    Component A: 30 kg metal cans 20

    25 kg canisters 0

    200 kg drums
    0

    0
    20

    40

    60

    80

    10

    12

    14

    16

    18

    20

    22

    24

    36

    48

    60

    Time/s

    Component B: 35 kg metal cans


    30.75kg canisters
    246 kg drums
    Application procedure
    Components A and B are delivered ready-to-use.
    Special packaging for coal mining is available on They are injected in the proportion of 1:1 by
    request. volume using a two component injection pump
    equipped with a static in-line mixer.
    If you leave the equipment for less than a week,
    you can leave the injection lines with the product:
    be sure to close the end of the lines with the
    secure caps. For cleaning of fittings and couplings
    as well as single machine components a PU
    cleaning solvent should be used.

    Storage
    If stored in dry conditions, in unopened, tightly
    Special Requirements closed original containers and within a
    temperature range of +5ºC and +35ºC, the
    Please Note: The foaming reaction time is components of MEYCO® MP 357 GS have a shelf
    significantly dependant on the temperature of the life of 12 months.
    PU resin, the rock and the ground water.
    Please store both components prior to application Safety precautions
    in a place of at least 15°C.
    Refer to the Material Safety Data Sheet for safety
    To achieve the best mixing of the components measures.
    during injection, the inclusion of a static in-line Avoid contact with skin and eyes by using the
    mixer in connection with the mixing head is required personal protective equipment, such as
    essential. The length of the static mixer should be overalls, gloves and eye goggles.
    approximately 50cm for correct mixing.
    If contact with skin occurs, wash thoroughly using
    Cleaning of injection equipment soap and water. If contact with eyes occurs, rinse
    thoroughly with an eyebath filled with boric acid
    For short breaks in injection, pump only solution and seek medical advice.
    Component A through the in-line static mixer
    nozzle. After injection and prior to storage of the The cured products are harmless. Uncured
    equipment, pump clean engine or hydraulic oil products should be prevented from entering local
    through the pump and both injection lines (Comp drainage system and water courses. Spillage
    A and comp B). must be collected using absorbent materials such
    as sawdust and sand, and dispose of in
    accordance with local regulations.

    The information given here is true, represents our best knowledge and is based not only on laboratory work but also on field experience.
    However, because of numerous factors affecting results, we offer this information without guarantee and no patent liability is assumed.
    For additional information or questions, please contact your local UGC representative.

    Headquarters: Europe: North America:

    UGC International BASF Construction Chemicals BASF Admixtures Inc.


    Division of BASF (Europe) AG Underground Construction Group
    Construction Chemicals (Switzerland) Ltd Vulkanstrasse 110 23700 Chagrin Boulevard
    Vulkanstrasse 110 8048 Zurich, Switzerland Cleveland, OH 44122-5554
    8048 Zurich, Switzerland Phone +41-58-958 22 11 USA
    Phone +41-58-958 22 11 Fax +41-58-958 32 46 Phone +1-216-839 75 00
    Fax +41-58-958 32 46 Fax +1-216-839 88 29

    Machines/Equipment: Latin America: Asia Pacific:

    MEYCO Equipment BASF Construction Chemicals BASF Construction Chemicals


    Division of BASF Latin America Asia Pacific
    Construction Chemicals (Switzerland) Ltd 23700 Chagrin Boulevard Room 2207, Shanghai Times Square
    Hegmattenstrasse 24 Cleveland, OH 44122-5554 93 Huai Hai Zhong Road
    8404 Winterthur, Switzerland USA Shanghai 200021, P.R. China
    Phone +41-58-958 27 00 Phone +1-216-839 75 00 Phone +86-21-5133 2834
    Fax +41-58-958 37 07 Fax +1-216-839 88 26 Fax +86-21-5306 9055

    For more information: Visit us: www.ugc.basf.com Contact us: [email protected]

    You might also like