RheoFIT 761 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

RheoFit®761

Permeability reducer and plasticiser for the production of interlocking tiles and
concrete blocks

Description • Improves weathering properties.


®
RheoFIT 761 liquid has been specifically • Reduces efflorescence.
formulated to produce early strengths and lower • Aids pigment distribution
water absorption values for semi dry concrete
®
mixes. RheoFIT 761 reduces permeability and Compatibility
improves cohesion. ®
RheoFIT 761 is compatible with all types of
Portland cement. For use with special cements
FIT 4 VALUE consult BASF’s Technical Services Dept. Do not
® ®
RheoFIT 761 is a key component to BASF’s FIT 4 premix RheoFIT 761 with other admixtures unless
VALUE concept. recommended by BASF’s Technical Services Dept.

FIT 4 VALUE considers the four elements essential Action


for MCP Manufactures: ®
RheoFIT 761 contains hydrophobic and plasticising
agents which aid the even dispersion of the cement
1. FIT for Economics and pigments throughout the mix.
2. FIT for Performance
3. FIT for Aesthetics ®
RheoFIT 761 acts by disrupting the capillary pore
4. FIT for Durability continuity and thus ensures increased water
tightness and resistance to frost.
Here, FIT means meeting every requirement for
economics, performance, aesthetics and durability. Typical properties*
*Properties listed are only for guidance and are not a guarantee
Primary uses of performance
®
RheoFIT 761's main area of application is in the
precast concrete industry, specifically: Colour Amber
• Interlocking tiles Specific gravity 1.021 at 20°C
• Hollow blocks pH 12.4
Chloride content Nil to BS 5075 : 1982
• Paving slabs
Nitrate content Nil
• Brick production Flashpoint Not applicable

Advantages
®
• RheoFIT 761's plasticising action produces Standards
workable mixes at lower water/ cement ratios. BS 6717 - Part 1: 1986
• Greatly reduces the penetration of water and
deleterious substances thereby increasing
durability.
RheoFit®761
Dosage Storage
®
600ml to 1,000ml per 100kg of Portland cement. POZZOLITH Standard must be stored where
o
temperatures do not drop below +5 C. If product
Effects of over dosage has frozen thaw and agitate until completely
®
Overdosing of RheoFIT 761 will result in an reconstituted. Store under cover, out of direct
increase in workability and cohesion. The cured sunlight and protect from extremes of temperatures.
properties will generally be unaffected.
Safety precautions
®
Method of use POZZOLITH Standard is not a fire or health
®
RheoFIT 761 is ready for use and is added to the hazard. Spillages should be washed down
mixing water at the selected dosage rate. immediately with cold water. For further information
refer to the material safety data sheet.
Guide to application
®
The optimum dosage rate for RheoFIT 761 is best Note
assessed after preliminary site trials have been Field service, where provided, does not constitute
carried out. Where possible the actual aggregates supervisory responsibility. For additional
and mixers should be used. As a guide an addition information contact your local BASF Construction
®
rate of 600ml of RheoFIT 761 per 100kg of cement Chemicals SA representative.
is recommended. Consult BASF’s Technical
Services Dept. for advice and assistance during Quality and care
trials. All products originating from BASF Construction
Chemicals SA, are manufactured under a
Packaging management system independently certified to
®
RheoFIT 761 is available in bulk and 200 Itr drums. conform to the requirements of the quality
standards ISO 9001/2000.

Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given
or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence
of any labour involved in the application are beyond our control.
As all BASF’s technical datasheets are updated on a regular basis it is the user's responsibility to obtain the most recent issue.
BASF Construction Chemicals South Africa (Pty) Ltd
P.O. Box 420, Westonaria, 1780 852 Sixteenth Road, Midrand
11 Pullinger Street, Westonaria, 1779 PO Box 2801, Halfway House, 1685
Tel: +27 11 754 1343 Tel: +27 11 203 2405
Fax: +27 11 754 1105
e-mail: [email protected] Website : basf-cc.co.za

You might also like