0% found this document useful (0 votes)
69 views1 page

20 Terminal Function of Ics: 20.1. Ic2800 (Rfkwmvkx60Ga) : Ic Micro-Processor

This document describes the terminal functions of two integrated circuits - IC2800 and IC6000. IC2800 is a microprocessor with 98 pins that controls various functions like audio levels, muting, remote control input, and communication with other modules. IC6000 is an FL driver IC with 4 pins that does not have any terminal name or function descriptions for its pins.

Uploaded by

ncir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
69 views1 page

20 Terminal Function of Ics: 20.1. Ic2800 (Rfkwmvkx60Ga) : Ic Micro-Processor

This document describes the terminal functions of two integrated circuits - IC2800 and IC6000. IC2800 is a microprocessor with 98 pins that controls various functions like audio levels, muting, remote control input, and communication with other modules. IC6000 is an FL driver IC with 4 pins that does not have any terminal name or function descriptions for its pins.

Uploaded by

ncir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

20 Terminal Function of ICs Pin

No.
Terminal Name I/O Description

55 TRAY_CCW_L O Tray Close Signal


20.1. IC2800 (RFKWMVKX60GA): IC 56 INNER_SW I Inner Switch for DLS6 and OPU
57 NC - No Connection
MICRO-PROCESSOR 58 NC - No Connection
59 NC - No Connection
60 HP_SW I Head Phone Detection
Pin Terminal Name I/O Description
61 MPORT_SW I Music Port Detection
No.
62 VCC/ VDD - Power Supply (+5V)
1 LM I Level Meter Left
63 AM_BP O AM Beaf Proof
2 ECHO_1 O ECHO Level Control 1
64 VSS - Ground (0V)
3 ECHO_2 O ECHO Level Control 2
65 PCONT/EFP_CE O Main Transformer Control Out-
4 ECHO_MUTE O ECHO Muting
put
5 NC - No Connection
66 DVD_PCONT O Power Control pin for DVD
6 NC - No Connection
Module
7 F_HOP O F_Hop for Digital Amplifier
67 TUNER DATA O TUNER DATA
8 BYTE - External Data Bus Width Select
68 TUNER CLK O TUNER CLK
Input (Connect to Ground)
69 TUNER RST O TUNER RST
9 CNVSS/EFP_CNVSS - Flash Mode Terminal (Con-
70 MOTOR_ON O Motor ON (TAPE)
nected to Ground)
71 TAPE_L I Tape control
10 XC_IN I 32.768 kHz Sub Clock
72 REC_H I REC_H for Tape recording
11 XC_OUT O 32.768 kHz Sub Clock
73 NC - No Connection
12 RESET/EFP_RESET - Reset Input (ACTIVE L)
74 TUNER INT I Silicon Tuner Interrupt
13 XOUT - 10 Mhz Main Clock
75 NC - No Connection
14 VSS - Ground ( 0V )
76 NC - No Connection
15 XIN - 10 Mhz Main Clock
77 NC - No Connection
16 VCC - Power Supply (+3.3V)
78 NC - No Connection
17 NMI - Connect to Vcc (+3.3V)
79 VOL/D.BASS LED O LED for Vol/H.Bass
18 RMT I Remote Control Input
80 RIPPING LED O LED for USB ripping
19 NC - No Connection
81 FL_DATA O Serial Data to FL Driver
20 SYNC I AC Failure Detect Input
82 FL_CS O FL Driver Chip Select
21 SW_LVL1 O Subwoofer Level 1
83 FL_CLK O Serial Clock to FL Driver
22 SW_LVL2 O Subwoofer Level 2
84 MIC-SWITCH I Mic Switch
23 SW_MUTE O Subwoofer Muting
85 NC - No Connection
24 MOD_DA O Digital Amplifier Muting
86 CLIP_S I Clip _Sensor
25 NC - No Connection
87 NC - No Connection
26 NC - No Connection
88 NC - No Connection
27 NC - No Connection
89 DVD_REG AD DVD Region Setting
28 NC - No Connection
IN
29 ASP_CLK I/O ASP CLOCK
90 MODEL_CS AD Model_ Selector (X42/62/82)
30 ASP_DAT I/O ASP DATA
IN
31 REG1/EFP_TXD1 I TUNER Region Setting 1
91 ROTA_JOG I Rotary Jog
32 EFP_RXD1 I EFP (for programming)
92 VOL_JOG I Volume Jog
33 EFP_SCLK I EFP CLOCK (for programming)
93 KEY2 I Keyline 2 Input
34 EFP_BUSY I EFP BUSY
94 KEY1 I Keyline 1 input
35 DVD_CMD O CMD Signal for DVD Module
95 NC - No Connection
36 DVD_STA I STATUS Signal from DVD mod-
96 AVSS - Analog Power Supply Input
ule
(Connect to Ground)
37 DVD_CLK I CLOCK Signal from DVD mod-
97 NC - No Connection
ule
98 VREF - Reference for A-D (+5V)
38 NC - No Connection
99 AVCC - Analog Power Supply Input
39 AGC_ACT/ CLIP_ATTN O AGC action output
100 NC - No Connection
40 NC - No Connection
41 EE_CS/EFP/EPM O EEPROM Chip Select 20.2. IC6000(C0HBB0000061): IC FL
42 EE_CLK O/I EEPROM CLOCK
43 EE_DATA O/I EEPROM DATA Driver
44 DC_DET 1 I DC Detect Input (PWR)
45 DC_DET 2 I DC Detect Input (AMP)
46 MUTE_A O Audio Mute Pin Terminal Name I/O Function
47 NC - No Connection No.
48 NC - No Connection 1 P0 - No Connection
49 NC - No Connection 2 P1 - No Connection
50 NC - No Connection 3 P2 - No Connection
51 NC - No Connection 4 P3 - No Connection
52 DVD_Mute I Signal from DVD module control 5 OSC I Oscillator Input
mute circuit 6 NC - No Connection
53 UNLOAD SW I Unload Switch Signal 7 DIN I Data Input
54 TRAY_CW_H O Tray Open Signal 8 CLK I Clock Input

139

You might also like