Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    ACKNOWLEDGEMENT Index

    Uploaded by

    Bhushan Shilwar
    The document acknowledges and thanks several people who contributed to the completion of a project. It specifically thanks Prof. Aniket Akhade for guidance and feedback throughout the process. It also thanks Mr. Ankit Dwivedi and Mr. Ranjeet Patel for their work in manufacturing project parts in the workshop. Finally, it thanks Mr. Sanjay Kothari of M/s Sun Diapet for supplying PET preforms needed for the project in a timely manner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ACKNOWLEDGEMENT Index

    Uploaded by

    Bhushan Shilwar
    54 views6 pages
    The document acknowledges and thanks several people who contributed to the completion of a project. It specifically thanks Prof. Aniket Akhade for guidance and feedback throughout the process. It also thanks Mr. Ankit Dwivedi and Mr. Ranjeet Patel for their work in manufacturing project parts in the workshop. Finally, it thanks Mr. Sanjay Kothari of M/s Sun Diapet for supplying PET preforms needed for the project in a timely manner.

    Original Title

    ACKNOWLEDGEMENT index

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document acknowledges and thanks several people who contributed to the completion of a project. It specifically thanks Prof. Aniket Akhade for guidance and feedback throughout the process. It also thanks Mr. Ankit Dwivedi and Mr. Ranjeet Patel for their work in manufacturing project parts in the workshop. Finally, it thanks Mr. Sanjay Kothari of M/s Sun Diapet for supplying PET preforms needed for the project in a timely manner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views6 pages

    ACKNOWLEDGEMENT Index

    Uploaded by

    Bhushan Shilwar
    The document acknowledges and thanks several people who contributed to the completion of a project. It specifically thanks Prof. Aniket Akhade for guidance and feedback throughout the process. It also thanks Mr. Ankit Dwivedi and Mr. Ranjeet Patel for their work in manufacturing project parts in the workshop. Finally, it thanks Mr. Sanjay Kothari of M/s Sun Diapet for supplying PET preforms needed for the project in a timely manner.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    ACKNOWLEDGEMENT

    I would like to thank all the people who got involved in my project work. Special thanks to
    PROF. ANIKET AKHADE who supported our ideas and gave us helpful feedback and inputs
    throughout the process.

    During the Bottle Blowers building and manufacturing MR. ANKIT DWIVEDI and MR.
    RANJEET PATEL did an amazing job producing all the parts needed to actually visualize my project.
    Their effort and knowledge helped me greatly when assembling and putting together all the parts. The
    time spent in the workshop has always been really enjoyable and friendly due to the welcoming
    atmosphere.

    I would like to thank Mr. SANJAY KOTHARI, PROPRIETOR M/S SUN DIAPET, VASAI for
    his kind and timely help when I was confronted with problems concerning plastics and preforms. His
    supply of PET preforms was greatly appreciated.

    i
    INDEX

    iv
    1 ABSTRACT
    v
    2 LIST OF FIGURES

    vi
    3 LIST OF TABLE

    Sr. no. Chapter Page no.

    1 Introduction 1

    1.1 Concept 1

    1.2 Materials suitable for Blow Molding 4

    1.3 Objective 5

    1.4 Report Layout 6

    Literature Review
    2 7

    The use of plastic for beverage bottles - a brief history


    2.1 7

    Opportunities of expansion
    2.2 9

    Top industries that offer promising growth


    2.3 10

    Therorotical evolution and Methodology


    3 11

    Plastic used for Bottles


    3.1 11

    ii
    PET ( POLYETHELYNE THERAPTHALATE )
    3.2 12

    Manufacturing VS. Buy – IN Preforms


    3.3 13

    Suppliers of Preform 14
    3.4

    Details of preform selected


    3.5 15

    Preform Heating test


    3.6 16

    Design of blow molding machine


    3.7 18

    Actual photograph of machine after assembly of all components


    3.8 23

    Experimental procedure, Function and operation


    3.9 24

    Results, Interpretation and analysis.


    4 25

    Testing and results


    4.1 25

    Project Cost estimation


    4.2 27

    Summary, Conclusions and future scope


    5 28

    Summary
    5.1 28

    Conclusion
    5.2 29

    5.3 Future scope 30

    References
    6 31

    iii
    ABSTRACT

    This project presents the research of packaging juices into plastic bottle and the design and
    manufacturing of Prototype PET Blowing Machine for Production of Plastic Bottles. The machine will
    be used for the production of plastic bottles suitable for bottling juices. Premanufactured PET preforms
    have proven to be the most convenient and promising choice for the fabrication of blown bottles. Basic
    tests to understand the behaviour of the preforms and the challenges of the blowing process have been
    carried out.

    A special focus has been placed on the different circumstances in contrast to industrial bottle
    production, in particular the needed air pressure to form the bottles. The following step was to find the
    ideal method and principle to handle the preforms and to transform them in the desired shape. Finally
    the design, drawing of the parts and assemblies were carried out with the 3-D CAD software Solid
    works. The designed parts for the bottle blower have been manufactured at the mechanical
    Workshop.The final assembly and testing of the blower then concluded the practical work for this
    project. A suitable design for the bottle production was found and the assembled Bottle Blower can
    now be used for the production of PET bottles.

    iv
    LIST OF FIGURES

    Figure No. Name Page No.

    1.1 Blow Molding Manufacturing Process 1

    3.1 Section view of preform 15

    3.2 actual image of preform 15

    3.3 Heating of preform immersed in hot water 16

    Temperature development of preform inside wall during


    3.4 16
    heating in hot water

    3.5 Assembly of PET blowing machine 18

    3.6
    Structural Frame 19

    3.7 Mould 19

    3.8 Nozzle holder 20

    3.9 Lever Arm 20

    3.10 Nozzle 21

    3.11 Actual photograph of machine after assembly of all components 23

    4.1 Result 1 25

    4.2 Result 2 25

    4.3 Result3 25

    4.4 Result 4 25

    Graphycal Representation of Pressure vs percent of bottle


    4.5 26
    blowned

    v
    LIST OF TABLES

    Table no. Name Page No.

    3.1 Plastic used for bottles 11

    3.2 Material selection 22

    4.1 Result 25

    4.2 Project Cost estimation 27

    vi

    You might also like