Sofirn User Manual: Technical Parameters
Sofirn User Manual: Technical Parameters
Sofirn User Manual: Technical Parameters
Technical Parameters
Moonhght Low Medium High Strobe
14500 Battery 21m 60Lm 224Lm 573Lm 573Lm
Huminatlon
1-\ANkaline 1 Im 20Lm 70Lm 270Lm 270Lm
14500 33Glr 12hr2min 3hr13min 1hr 15min 2hr31min
Running time AAAlaline 180hr 11hr40min 3hr19min 51 min 1hr42min
Distance 80 meter
Intensity 3500cd
Impact Resistance 1 meter
Water Resistance IPX8
No ti ce: Th e a bove-mentioned parame ters are approx1matc and those may vary
acc ordance wi th flas hlight s. dif fe rent brands I capacities o f ba t terie s,
and en v i ronme n ts.
Due to the protective setup, High bri ghtness level t o automaticall y t ur ns
to Medium br .i ghtness level after wor king 3 mi nut es , so the runnin g- time
of High br ightness level is accumu lat ed time.
(€ *
R~S @~
-
Battery Supported: lpcs 14500 Battery or AA Alkaline battery
* Dimension : 88mm(length)x 19mm(diameter) x 20mm(head)
* Net Weight: 42 gram (no batteries included)
* Mode Memory: Yes!
Sofirn SPlOA * Lock-out: Yes I When it is off, 4 continuous clicks to lock·up.
*Made by Aircraft 6061 grade-aluminum alloy, used CNC machines, Premi_ um type
Max 573 Lumens III hard-anodi zed a nti-abrasive finis h to get so lid built body, anti -cr as h
and better heat exc ha nge
Sofirn SPlOA is a AA tube-light with 4+1 modes. * Orange Peel Reflector
* Toughened g lass lens
* The waterproof level is IPXB, can be used in rainstorm.
* Reverse polarity protection, to protect from improper battery installation damaged by the electrolyte leakage or battery explosion.
* Please unscrew the tail cap one-half turn or take out the battery to prevent
accidental activation during storage or transportation.
Battery Specifications: * please use cleaning cloth to dean the thread every 6 months, and it will be better
Battery Types Dimension & Quantity Nominal Voltages Can be used or not to use silicone grease to oil thread.
Lithium ion battery 14500 *l 3.7 v Yes * Long-tern usage can result in 0-ring wear. To maintain a proper water seal,
AA Battery AA*l 1.Sv/1.2v Yes replace the ring with an approved spare.
* Periodic cleaning of the battery contacts improves the flashlight' s performance
as dirty contacts may cause the flashlight to flicker, shine intermittently or even fail to
Battery Replacement: illuminate for the following reasons:
Unscrew the tail cap to inset battery with the anode side(+) towards the Reason A: The battery needs replacement.
Solution: please replace battery. Please confirm the correct installation Reason B: The
light's head/LED, and then screw the tail cap back on. threads, PCB board contact or other contacts are dirty.
Solutions: please clean the contact points with a cotton swab soaked in rubbing
alcohol.
Operation Instruction:
The side switch to control al 1 function: If the above methods do not work please refer to the warranty policy before
On/ Off: press the switch for 0. 5 second to activate or turn off contacting your authorized distributor.
Change Modes: click the switch to cycle through
Sofirn Limited:
Moonl ight-Low---+\1edium-Moonl ight-"'Low; Tel: +86-755-23440047 Fax:+86-755-23440141
Memory Fuction: from Off, press 1 second to turn on the previous used mode. Web: www.sofirnlight.com
High Mode: 2 continuous clicks to activate High Mode except in the status of lock-up, E-mail: [email protected] [email protected]
1 click to return back to original mode. Address:l/F to 9/F, 1st Building, N0.110 Tenglong Industrial Center, Guanlan Street,
Strobe: 3 continuous clicks to activate Strobe; one c 1 ick to return back to Longhua New District, Shenzhen 518000, China
original mode.
How to Lock-out in pocket or handbag:
When off, 4 continuous clicks to lock-up. The light flashes two times, which means it
is locked.
4 continuous clicks to unlock. The light flashes two times, which means it is
unlocked.
Battery reminder: lower than 2.8 Volts, one mode blinks 2 times per second.
Tips:
It is not a toy, do not let children play with it, and please do not point the beam at others
It is not suggested to use High brightness continuously to avoid accumulating a lot of heat which
might cause damage to the flashlight.