Scribd
Upload
416 views

Assignment 2 PDF

1. The document contains questions about designing analog and digital filters. It asks the reader to determine filter orders, design filters based on given specifications, and transform analog filters to digital filters using various methods like bilinear transformation and impulse invariance.

Uploaded by

Glan Devadhas
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
416 views

Assignment 2 PDF

1. The document contains questions about designing analog and digital filters. It asks the reader to determine filter orders, design filters based on given specifications, and transform analog filters to digital filters using various methods like bilinear transformation and impulse invariance.

Uploaded by

Glan Devadhas
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

For the given specification, tolerance in pass band= 1dB, tolerance in stop band=30dB, Ωp= 200
rad/sec and Ωs =600 rad/sec. Determine the order of the Butterworth analog filter.
2. Using bilinear transform, design a high pass filter, monotonic in pass band with cut off frequency
of 1000Hz, αp=3dB and, αs=10dB at 350Hz. The sampling frequency is 5000Hz
Hint: The given filter specification is the required high pass digital filter with αp=3dB,wp=2000π
rad/sec αs=10 dB,ws=700π ,T=2x10-4 sec.
Prewarp the frequencies and find Ωp &Ωs using Bilinear transform .Convert the high pass spec in
to low pass spec by interchange values of Ωp &Ωs
Find the order
Find the normalized transfer function
Find Ωc
Apply the frequency transformation S=Ωc/S
Apply S – Z Transfermation
3. For the analog transfer function H(s)=2/(s+1)(s+2) , determine H(z) using impulse invariance
method (Assume T=1 sec)
4. Given the specification αp=1dB, αs=30dB, Ωp=200 rad/sec and, Ωs=600 rad/sec. Determine the
order of the filter.
5. Design an analog Butterworth filter that has a -2dB pass band attenuation at a frequency of 20
rad/sec and at least -10 dB stop band attenuation at 30 rad/sec
6. Find H(z) from H(s)= 2/(s+4)(s+2) using bilinear transformation. Assume T=1sec
7. Explain analog frequency transformation
8. Compare FIR and IIR filter
9. Design a digital Butterworth filter satisfying the constraints
0.9 ≤ H(ejω) ≤ 1 for 0 ≤ ω ≤ 0.2π
H(ejω) ≤ 0.2 for 0.4π ≤ ω ≤ π
With T = 1 sec using Bilinear transformation

10 Design a digital Butterworth filter satisfying the constraints

0.707 ≤ H(ejω) ≤ 1 for 0 ≤ ω ≤ π/2

H(ejω) ≤ 0.2 for 3π ≤ ω ≤ π

With T = 1 sec using Bilinear transformation

11 Determine the order of type I Chebyshev low pass filter that has a 3 dB ripple in the pass
band and pass band frequency fp=1KZ , a stopband frequency of 2KZ and an attenuation of 16
dB or more

You might also like