Scribd
Upload
101 views2 pages

Screw Dimension

The document defines standards for screw thread designations and dimensions. It specifies that screw thread size is designated by letter M followed by the diameter and pitch. It then provides tables listing the design dimensions like major diameter, pitch, minor diameter, depth of thread, and stress area for coarse and fine screw thread series based on International Organization for Standardization (ISO) standards.

Uploaded by

Abhijeet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views2 pages

Screw Dimension

The document defines standards for screw thread designations and dimensions. It specifies that screw thread size is designated by letter M followed by the diameter and pitch. It then provides tables listing the design dimensions like major diameter, pitch, minor diameter, depth of thread, and stress area for coarse and fine screw thread series based on International Organization for Standardization (ISO) standards.

Uploaded by

Abhijeet Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Contents

387
1. Size designation. The size of the screw thread is designated by the letter `M' followed by the
diameter and pitch, the two being separated by the sign ×. When there is no indication of the pitch, it
shall mean that a coarse pitch is implied.
2. Tolerance designation. This shall include
(a) A figure designating tolerance grade as indicated below:
‘7’ for fine grade, ‘8’ for normal (medium) grade, and ‘9’ for coarse grade.
(b) A letter designating the tolerance position as indicated below :
‘H’ for unit thread, ‘d’ for bolt thread with allowance, and ‘h’ for bolt thread without
allowance.
For example, A bolt thread of 6 mm size of coarse pitch and with allowance on the threads and
normal (medium) tolerance grade is designated as M6-8d.

The design dimensions of I.S.O. screw threads for screws, bolts and nuts of coarse and fine
series are shown in Table 11.1.

Designation Pitch Major Effective Minor or core Depth of Stress


mm or or pitch diameter thread area
nominal diameter (dc ) mm (bolt) mm2
diameter Nut and mm
Nut and Bolt
Bolt (dp ) mm Bolt Nut
(d = D)
mm
(1) (2) (3) (4) (5) (6) (7) (8)

Coarse series
M 0.4 0.1 0.400 0.335 0.277 0.292 0.061 0.074
M 0.6 0.15 0.600 0.503 0.416 0.438 0.092 0.166
M 0.8 0.2 0.800 0.670 0.555 0.584 0.123 0.295
M1 0.25 1.000 0.838 0.693 0.729 0.153 0.460
M 1.2 0.25 1.200 1.038 0.893 0.929 0.158 0.732
M 1.4 0.3 1.400 1.205 1.032 1.075 0.184 0.983
M 1.6 0.35 1.600 1.373 1.171 1.221 0.215 1.27
M 1.8 0.35 1.800 1.573 1.371 1.421 0.215 1.70
M2 0.4 2.000 1.740 1.509 1.567 0.245 2.07
M 2.2 0.45 2.200 1.908 1.648 1.713 0.276 2.48
M 2.5 0.45 2.500 2.208 1.948 2.013 0.276 3.39
M3 0.5 3.000 2.675 2.387 2.459 0.307 5.03
M 3.5 0.6 3.500 3.110 2.764 2.850 0.368 6.78
M4 0.7 4.000 3.545 3.141 3.242 0.429 8.78
M 4.5 0.75 4.500 4.013 3.580 3.688 0.460 11.3
M5 0.8 5.000 4.480 4.019 4.134 0.491 14.2
M6 1 6.000 5.350 4.773 4.918 0.613 20.1

Top
Contents

388
(1) (2) (3) (4) (5) (6) (7) (8)

M7 1 7.000 6.350 5.773 5.918 0.613 28.9


M8 1.25 8.000 7.188 6.466 6.647 0.767 36.6
M 10 1.5 10.000 9.026 8.160 8.876 0.920 58.3
M 12 1.75 12.000 10.863 9.858 10.106 1.074 84.0
M 14 2 14.000 12.701 11.546 11.835 1.227 115
M 16 2 16.000 14.701 13.546 13.835 1.227 157
M 18 2.5 18.000 16.376 14.933 15.294 1.534 192
M 20 2.5 20.000 18.376 16.933 17.294 1.534 245
M 22 2.5 22.000 20.376 18.933 19.294 1.534 303
M 24 3 24.000 22.051 20.320 20.752 1.840 353
M 27 3 27.000 25.051 23.320 23.752 1.840 459
M 30 3.5 30.000 27.727 25.706 26.211 2.147 561
M 33 3.5 33.000 30.727 28.706 29.211 2.147 694
M 36 4 36.000 33.402 31.093 31.670 2.454 817
M 39 4 39.000 36.402 34.093 34.670 2.454 976
M 42 4.5 42.000 39.077 36.416 37.129 2.760 1104
M 45 4.5 45.000 42.077 39.416 40.129 2.760 1300
M 48 5 48.000 44.752 41.795 42.587 3.067 1465
M 52 5 52.000 48.752 45.795 46.587 3.067 1755
M 56 5.5 56.000 52.428 49.177 50.046 3.067 2022
M 60 5.5 60.000 56.428 53.177 54.046 3.374 2360

Fine series
M8×1 1 8.000 7.350 6.773 6.918 0.613 39.2
M 10 × 1.25 1.25 10.000 9.188 8.466 8.647 0.767 61.6
M 12 × 1.25 1.25 12.000 11.184 10.466 10.647 0.767 92.1
M 14 × 1.5 1.5 14.000 13.026 12.160 12.376 0.920 125
M 16 × 1.5 1.5 16.000 15.026 14.160 14.376 0.920 167
M 18 × 1.5 1.5 18.000 17.026 16.160 16.376 0.920 216
M 20 × 1.5 1.5 20.000 19.026 18.160 18.376 0.920 272
M 22 × 1.5 1.5 22.000 21.026 20.160 20.376 0.920 333
M 24 × 2 2 24.000 22.701 21.546 21.835 1.227 384
M 27 × 2 2 27.000 25.701 24.546 24.835 1.227 496
M 30 × 2 2 30.000 28.701 27.546 27.835 1.227 621
M 33 × 2 2 33.000 31.701 30.546 30.835 1.227 761
M 36 × 3 3 36.000 34.051 32.319 32.752 1.840 865
M 39 × 3 3 39.000 37.051 35.319 35.752 1.840 1028

Note : In case the table is not available, then the core diameter (dc) may be taken as 0.84 d, where d is the major
diameter.

Top

You might also like