Scribd
Upload
128 views4 pages

Staad Double Cell

This document contains the input file for a structural analysis software called STAAD. It includes information about the model geometry such as joint coordinates, member incidences, material properties, and applied loads. Loads include dead load, earth pressure, live loads, and load combinations for analysis. Reactions will be output to a file called REACTION.DAT.

Uploaded by

SOUMYA BHATT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
128 views4 pages

Staad Double Cell

This document contains the input file for a structural analysis software called STAAD. It includes information about the model geometry such as joint coordinates, member incidences, material properties, and applied loads. Loads include dead load, earth pressure, live loads, and load combinations for analysis. Reactions will be output to a file called REACTION.DAT.

Uploaded by

SOUMYA BHATT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

STAAD INPUT FILE

STAAD PLANE
START JOB INFORMATION
ENGINEER DATE 17-Apr-20
END JOB INFORMATION
INPUT WIDTH 79
UNIT METER Mton
JOINT COORDINATES
*END SIDE WALL
1 0.00 0 0.00; 2 0.00 0.85 0.00; 3 0.00 1.608 0.00; 4 0.00 2.367 0.00

5 0.00 3.125 0.00; 6 0.00 3.883 0.00; 7 0.00 4.642 0.00; 8 0.00 5.4 0.00

9 0.00 6.25 0.00;


* TOP SLAB
10 0.9 6.25 0.00; 11 2.163 6.25 0.00; 12 3.425 6.25 0.00

13 4.688 6.25 0.00; 14 5.95 6.25 0.00; 15 6.85 6.25 0.00

16 7.75 6.25 0.00; 17 9.013 6.25 0.00; 18 10.275 6.25 0.00

19 11.538 6.25 0.00; 20 12.8 6.25 0.00; 21 13.7 6.25 0.00

* END SIDE WALL


22 13.7 5.4 0.00
23 13.7 4.642 0.00; 24 13.7 3.883 0.00; 25 13.7 3.125 0.00; 26 13.7 2.367
0.00
27 13.7 1.608 0.00; 28 13.7 0.85 0.00

* BOTTOM SLAB
29 13.7 0 0.00; 30 12.8 0 0.00; 31 11.538 0 0.00

32 10.275 0 0.00; 33 9.013 0 0.00; 34 7.75 0 0.00

35 6.85 0 0.00; 36 5.95 0 0.00; 37 4.688 0 0.00

38 3.425 0 0.00; 39 2.163 0 0.00; 40 0.9 0 0.00

*INTERMEDIATE SIDE WALL


41 6.85 5.4 0.00
42 6.85 4.642 0.00; 43 6.85 3.883 0.00; 44 6.85 3.125 0.00; 45 6.85 2.367
0.00
46 6.85 1.608 0.00; 47 6.85 0.85 0.00

MEMBER INCIDENCES
1 1 2; 2 2 3; 3 3 4; 4 4 5; 5 5 6; 6 6 7; 7 7 8; 8 8 9; 9 9 10; 10 10 11

11 11 12; 12 12 13; 13 13 14; 14 14 15; 15 15 16; 16 16 17; 17 17 18

18 18 19; 19 19 20; 20 20 21; 21 21 22; 22 22 23; 23 23 24

24 24 25; 25 25 26; 26 26 27; 27 27 28; 28 28 29

29 29 30; 30 30 31; 31 31 32; 32 32 33; 33 33 34; 34 34 35; 35 35 36

36 36 37; 37 37 38; 38 38 39; 39 39 40;40 40 1;

*INTERMEDIATE SIDE WALLS


41 15 41; 42 41 42;43 42 43;44 43 44;45 44 45;46 45 46;47 46 47;48 47 35
DEFINE MATERIAL START
ISOTROPIC MATERIAL1
E 2.73861e+006
POISSON 0.15
DENSITY 2.4
DAMP 2.8026e-044
END DEFINE MATERIAL
CONSTANTS
MATERIAL MATERIAL1 MEMB 1 TO 48
MEMBER PROPERTY INDIAN
1 TO 8 21 TO 28 41 TO 48 PRIS YD 0.85 ZD 1

9 TO 20 PRIS YD 0.7 ZD 1
29 TO 40 PRIS YD 0.8 ZD 1
**SUPPORT SPECS*********
*CONSIDERING MOD. OF SUBGRADE RXN AS 1500 T/CUM

SUPPORTS
1 FIXED BUT FX FZ MX MY MZ KFY 900
29 FIXED BUT MX MY MZ KFY 900
30 34 36 40 FIXED BUT FX FZ MX MY MZ KFY 2162.5

31 TO 33 37 TO 39 FIXED BUT FX FZ MX MY MZ KFY 2525

35 FIXED BUT FX FZ MX MY MZ KFY 1800

****LOADING ON THE STRUCTURE****************

LOAD 1 DEAD LOAD FOR MAX FILL


MEMBER LOAD
1 TO 8 21 TO 28 41 TO 48 UNI GY -2.04

9 TO 20 UNI GY -1.68
29 TO 40 UNI GY -1.92
*LOAD DUE TO EARTH CUSHION
9 TO 20 UNI GY 0
*LOAD DUE TO EARTH PRESSURE AND LL SURCHARGE DUE TO MAXIMUM HEIGHT OF FILL
AT BOTH SIDES
LOAD 2 EARTH PRESSURE FOR MAX FILL
MEMBER LOAD
8 TRAP GX 0.509 0
7 TRAP GX 0.964 0.509
6 TRAP GX 1.419 0.964
5 TRAP GX 1.873 1.419
4 TRAP GX 2.328 1.873
3 TRAP GX 2.782 2.328
2 TRAP GX 3.237 2.782
1 TRAP GX 3.746 3.237
21 TRAP GX 0 -0.509
22 TRAP GX -0.509 -0.964
23 TRAP GX -0.964 -1.419
24 TRAP GX -1.419 -1.873
25 TRAP GX -1.873 -2.328
26 TRAP GX -2.328 -2.782
27 TRAP GX -2.782 -3.237
28 TRAP GX -3.237 -3.746
LOAD 3 LL SURCHARGE
MEMBER LOAD
8 UNI GX 0.71928
7 UNI GX 0.71928
6 UNI GX 0.71928
5 UNI GX 0.71928
4 UNI GX 0.71928
3 UNI GX 0.71928
2 UNI GX 0.71928
1 UNI GX 0.71928
21 UNI GX -0.71928
22 UNI GX -0.71928
23 UNI GX -0.71928
24 UNI GX -0.71928
25 UNI GX -0.71928
26 UNI GX -0.71928
27 UNI GX -0.71928
28 UNI GX -0.71928
LOAD 4 70R TRACKED LL IN MIDDLE OF END SPAN

MEMBER LOAD
9 TO 14 UNI GY -2.316
15 UNI GY -2.316 0 0.060
LOAD 5 70R TRACKED LL IN MID SPAN OR PENAULTIMATE SUPPORT

MEMBER LOAD
12 TO 17 UNI GY -2.316
11 UNI GY 0 0.845 0.96
18 UNI GY 0 0 0.115
LOAD 6 70R TRACKED LL AT START OF END SPAN

MEMBER LOAD
9 TO 13 UNI GY -2.513
14 UNI GY -2.5130 0.30

LOAD 7 CLASSA LIVE LOAD IN MIDDLE OF END SPAN

MEMBER LOAD
10 TO 13 UNI GY -1.819
9 UNI GY -1.819 0.4835 0.5
14 UNI GY -1.819 0 0.0165
LOAD 8 CLASSA LIVE LOAD IN MID SPAN OR PENAULTIMATE SUPPORT

MEMBER LOAD
14 TO 15 UNI GY -1.819
13 UNI GY -1.819 0.0135 0.48
16 UNI GY -1.819 0 0.4665
LOAD 9 CLASSA LIVE LOAD AT START OF END SPAN

MEMBER LOAD
9 TO 11 UNI GY -2.231
12 UNI GY -2.231 0 0.258
****LOAD COMBINATIONS***************

LOAD COMB 10 DL + EP + SUR + 70R IN MIDDLE OF END SPAN

1 1.0 2 1.0 3 1.0 4 1.0


LOAD COMB 11 DL + EP + SUR + 70R IN MID SPAN OR PENAULTIMATE SUPPORT

1 1.0 2 1.0 3 1.0 5 1.0


LOAD COMB 12 DL + EP + SUR + 70R AT START OF END SPAN
1 1.0 2 1.0 3 1.0 6 1.0
LOAD COMB 13 DL + EP + SUR + CLASSA IN MIDDLE OF END SPAN

1 1.0 2 1.0 3 1.0 7 1.0


LOAD COMB 14 DL + EP + SUR + CLASSA IN MID SPAN OR PENAULTIMATE SUPPORT

1 1.0 2 1.0 3 1.0 8 1.0


LOAD COMB 15 DL + EP + SUR + CLASSA AT START OF END SPAN

1 1.0 2 1.0 3 1.0 9 1.0


LOAD COMB 16 DL + EP + SURCHARGE
1 1.0 2 1.0 3 1.0
PERFORM ANALYSIS
PRINT MAXFORCE ENVELOPE LIST 1 TO 48

START SCRIPT LANGUAGE


UNIT MET KNS
OPEN FILE REACTION.DAT
FOR SUPPORT ALL
FOR LOAD ALL
WRITE REACTION JOINT FY MX MZ
FORMAT=I5,3F8.2
CLOSE
END SCRIPT LANGUAGE
FINISH

You might also like