E20 HEAT LOAD ESTIMATION FORM

SHEET DATE

PREPARED BY

NAME OF JOB

LOCATION APPROVED

SPACE USED FOR

ESTIMATE LOCAL TIME PEAK LOCAL TIME
FOR SUN TIME LOAD SUN TIME
SIZE SQ.FT x = - CU FT

EQUIPMENT OPERATION HOUR/DAY

SUN GAIN OR TEMP.
ITEM AREA OR QUANTITY FACTOR BTU/HOUR
DIFF CONDITIONS DB WB %RH DP GR/LB

SOLAR GAIN - GLASS OUTDOOR (OA)

GLASS SQ.FT x x 0 ROOM (RM)

GLASS SQ.FT x x 0 DIFFERENCE - -

GLASS SQ.FT x x 0 OUTDOOR AIR

GLASS SQ.FT x x 0 PEOPLE x CFM/PERSON = -
Ventilation
SKYLIGHT SQ.FT x x 0 - SQ.FT x - 1 AIR CHG/HR= -

SOLAR & TRANS. GAIN - WALLS & ROOF CFM VENTILATION = -

WALL SQ.FT x x 0
SWINGING
PEOPLE x CFM/PERSON = -
REVOLVING DOORS
WALL SQ.FT x x 0

WALL SQ.FT x x 0 OPEN DOORS DOORS x CFM/DOOR = -

WALL SQ.FT x x 0 Infiltration EXHAUST FAN

ROOF - SUN SQ.FT x x 0 CRACK FEET x CFM/FT = -

ROOF - SHADED SQ.FT x x 0 CFM INFILTRATION = -

TRAN. GAIN - EXCEPT WALLS & ROOF CFM OUTDOOR AIR THRU APPARATUS = CFMOA

ALL GLASS - SQ.FT x - x 0 APPARATUS DEW POINT & DEHUMIDIFIED AIR QUANTITY
PARTITION SQ.FT x - x 0 - ERSH
EFFECTIVE SENSIBLE
ESHF = = #DIV/0!
HEAT FACTOR
CEILING SQ.FT x - x 0 - ERTH

FLOOR SQ.FT x - x 0 ADP INDICATED ADP = F SELECTED ADP = F

INFILTRATION SQ.FT x - x 1.09 0

Dehum. BF) x (TRM F - TADP
(1- - - - F) = - F
Rise
INTERNAL HEAT
PEOPLE - x 0 - ERSH
Dehum.
= #DIV/0! CFMDA
Cfm FDEHUM. RISE
POWER HP OR KW x 0 1.09 x -

LIGHTS WATTS x 1.25 x 3.41 0 SUPPLY AIR QUANTITY

APPLIANCES, ETC. x 3.41 0 - RSH =

Outlet
#DIV/0! F (RM - OUTLET AIR)*
Temp. Diff
ADDITIONAL HEAT GAINS x 0 1.09 x #DIV/0! CFMDA

SUB TOTAL 0 - RSH =

Supply Cfm #DIV/0! CFMSA
STORAGE SQ.FT x x (- ) 0 1.09 x #DIV/0! FDESIRED DIFF

SUB TOTAL 0
Bypass
#DIV/0! CFMSA #DIV/0! CFMDA = CFMBA
Cfm
SAFETY FACTOR % 0

ROOM SENSIBLE HEAT (RSH) = 0

*IF THIS DT IS TOO HIGH, DETERMINE SUPPLY CFM FOR DESIRED DIFFERENCE BY SUPPLY AIR QUANTITY
FORMULA.
SUPPLY
FAN
SUPPLY DUCT HEAT GAIN %+ DUCT LEAK %+ % 0
H.P.
LOSS RESULTING ENT & LVG CONDITIONS AT APPARATUS
OUTDOOR AIR - CFM x - F x BF x 1.09 0 - CFMOA
TRM - F+ x (TOA - F - TROOM - F) = TEDB #DIV/0! F
EFFECTIVE ROOM SENSIBLE HEAT (ERSH) = 0 CFM**

LATENT HEAT TADP - F+ - BF x (TEDB #DIV/0! F - TADP - F) = TLDB #DIV/0! F

INFILTRATION CFM x GR/LB x 0.68 0 FROM PSYCH. CHART: TEWB F, TEWB F

PEOPLE - x 0
**WHEN BYPASSING A MIXTURE OF OUTDOOR AND RETURN AIR, USE SUPPLY CFM, WHEN BYPASSING RETURN AIR ONLY,
USE DEHUMIDIFIED CFM.
STEAM LB/HR x 1050 0

APPLIANCES, ETC. 0 NOTES

ADDITIONAL HEAT GAINS 0

VAPOR TRANS. SQ.FT x 0.01 x - GR/LB x 0

SUB TOTAL 0

SAFETY FACTOR % 0

ROOM LATENT HEAT (RLH) = 0

SUPPLY DUCT LEAKAGE LOSS % 0

OUTDOOR AIR - CFM x - GR/LB x - BF x 0.68 0

EFFECTIVE ROOM LATENT HEAT (ERLH) = 0

EFFECTIVE ROOM TOTAL HEAT (ERTH) = 0

OUTDOOR AIR HEAT

SENSIBLE - CFM x - Fx (1- - BF) x 1.09 0

LATENT - CFM x - GR/LB x (1- - BF) x 0.68 0

RETURN
DUCT
CHECK FIGURES
RETURN DUCT HEAT GAIN % RSH + % RSH 0
LEAKAGE
BTU/HR/SQ.FT = #DIV/0! GRAND TOTAL RM SENS.
GAIN
RETURN AIR OR BLOW - THRU FAN H.P. x 2545 0 SQ.FT/PERSON = WATT/SQ.FT =

GRAND TOTAL HEAT (GTH) OR DEHUMIDIFIER LOAD = 0 VENT. AIR CFM/SQ.FT TOTAL AIR CFM/SQ.FT

TOTAL AIR CHANGE MIN. OUTSIDE AIR CHANGE MIN.

PIPING HEAT
UMP H.P. % GTH + % GTH 0
GAIN

REFRIGERATION LOAD = 0 AIR CONDITIONING LOAD ESTIMATE FORM E - 20 (3 - 72)