See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/269050025

BOTOSEIS: A new Seismic Unix based interactive platform for seismic data
processing

Conference Paper · August 2009

DOI: 10.1190/sbgf2009-318

CITATIONS READS
0 1,729

3 authors, including:

German Garabito joão carlos Cruz

Universidade Federal do Rio Grande do Norte Federal University of Pará
69 PUBLICATIONS   160 CITATIONS    92 PUBLICATIONS   160 CITATIONS   

SEE PROFILE SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Seismic Inversion & Regularization View project

P- AND S- WAVE INTERVAL VELOCITY INVERSION BASED ON COHERENCY MEASUREMENTS FOR FULL WAVEFORM INVERSION View project

All content following this page was uploaded by joão carlos Cruz on 12 August 2016.

The user has requested enhancement of the downloaded file.

 1

BOTOSEIS: A new Seismic Unix based interactive platform for

seismic data processing
Williams Lima, German Garabito, Iran G. Oliveira and João C. R. Cruz
email: [email protected]
keywords: Seismic Unix, Java Language, Interactive Processing, Data Visualization

ABSTRACT

After eight years of the first distribution of the user’s manual of the Seismic Unix (SU) package, it
is yet a challenge to execute some seismic processing SU scripts, especially for inexperienced users.
Up to now there are few friendly Graphical User Interfaces (GUI) for the SU package, namely Tksu,
iSU and GêBR. In order to obtain a more robust and flexible way to work with the SU package, we
present a new graphical user interface written in the Java programming language, which can be used
under any operating system, the so-called BOTOSEIS. It is adequate to be used both as a production
or as interactive development environment, by creating and managing projects, lines and flowcharts of
seismic data processing. It is also possible to add SU based softwares, interactively, without knowl-
edge about any programming language. The BOTOSEIS platform is structured by modules, which
can be a single application or a combination of SU programs to produce a more complex result, e.g.,
iVIEW, iVELAN and iNIP-PICKING. The first is a GUI used for data visualization, the second is
an important interactive tool for velocity analysis fitted for production environments, and the last is a
software for data picking in the zero-offset seismic section that is fundamental for traveltime inversion
methods.

INTRODUCTION
The Seismic Unix (SU) package was developed with the initial support of the Society of Exploration Geo-
physicists (SEG) and the Gas Research Institute (GRI). Nowadays it is supported by the Center for Wave
Phenomena (CWP) of the Colorado School of Mines, United States of America (USA). It is a data process-
ing environment for Unix-based systems, written mainly in C language, which extends the Unix operating
systems for seismic processing production and research tasks, and it is completely free and open source
(Cohen and Stockwell Jr., 2000). With SU package fundamental techniques of seismic data processing
(e.g., spectral analysis, F-K filter, velocity analysis, NMO-DMO stack, deconvolution, migration and oth-
ers) are applied by using command lines or script files. Due to this fact, students or professionals without
experience in the use of commands and scripts have difficulties in using the SU package. Even so the SU
software has been successfully used in the geophysical community, considering its important character-
istics referring to facilities for seismic data procesing without using any commercial package, which is a
strong advantage for the academic institutions and researchers (Stockwell Jr., 1999).
In order to facilitate the access to the SU applications, the graphical interfaces Tksu, iSU and GêBR
were developed by users of different institutions. The Tksu is developed in the Tcl/Tk language, it is a
graphical environment to build interactively flowcharts for seismic processing. The iSU software has as
main features the execution of a single process or a sequence of processes from a special dialog box. The
GêBR software is developed by using GTKmm library at Campinas University (UNICAMP), Brazil. It is
adequate to manage projects and seismic lines, and also to create, execute and manage flowcharts.
The SU package is not only the most famous geophysical free software, but it is also an excellent
tool for new developments, students and researchers interested in seismic data processing. Therefore, to
2 WIT report <year>

facilitate the use of SU software it is necessary to have an efficient and robust graphical user interface.
To reach this goal, at Federal University of Para, Brazil, in recent years have been implemented projects
to develop graphical user interfaces for SU software and some main processes of seismic data processing.
As a result of this endeavor, we present the BOTOSEIS platform. It is a software written in the Java
programming language with a graphical environment to create and manage projects, lines and processing
flowcharts. The name BOTO refers to a legendary fish from the Amazon river frequently used as main
character of local folk tales.
Besides the SU package, the BOTOSEIS platform includes three interactive modules (iVIEW, iVELAN
and iNIP-PICKING) that are special tools based on SU applications. With iVIEW it is possible to obtain
different visualization modes of multiple seismic sections, it has, also, dialog boxes for applying gains and
for viewing headers of the seismic traces. The iVELAN is a GUI software based on SU applications for
interactive velocity analysis in common-midpoint seismic domain, the so-called CMP method. The iNIP-
PICKING is a software for semi-automatic amplitude picking of a selected point or of a target seismic
horizon on a zero-offset (ZO) section, by using local properties of the interpreted reflector.

BOTOSEIS PLATFORM
Since 2003 years, researchers at Federal University of Pará, Brazil, have dedicated an important part of
their time on the development of an interactive graphical interface, that is able to create and manage SU
based processes, by resulting in the development of the BOTOSEIS platform. In order to make easier
its application, the BOTOSEIS preserves some characteristics of well-known commercial seismic data
processing packages. The BOTOSEIS user can create, manage and execute projects, lines and flowcharts
from only one interactive environment. In the flowcharts the processes can be interactively inserted, moved
or excluded.
The BOTOSEIS platform offers the following posibilities: a) the main work environment is constituted
by five areas, to be known: 1) visualization of project, lines and flowcharts 2) visualization of programs
grouped in categories; 2) visualization and interactive manipulation of processing flowcharts; 3) dialog
window to insert parameters of the SU programs in a flowchart; and 4) visualization of errors and log files
to verify the process;
By means of the main interface the user creates and manages projects, lines and flowcharts. Also, it
is possible to move, exclude, and add SU process in the flowchart, and to execute and stop a process.
The BOTOSEIS allows the inclusion of SU modules or other Unix based packages in the interactive work
environment.
In Figure 1 it is shown the main work environment of the BOTOSEIS platform. On the upper left we
show the window for management of projects, lines and flowcharts and in the bottom the work place for
selecting SU or others programs. In the central part there is a place to build flowcharts with options to run,
pause, and kill a process, and also to obtain information of it. On the right we have the window to insert
the parameters of the processes. In Figure 2 we have tool boxes to add interactively new programs in the
BOTOSEIS platform, very important for customizing the BOTOSEIS environment.

INTERACTIVE MODULES
The philosophy behind BOTOSEIS development is to make possible the expandability and flexibility of
the SU package in only one interactive environment, preserving the free software characteristics. It is
structured by modules that can be a single program or a combination of SU based softwares, in order to
produce a more complex result, e.g., the so-called iVIEW (Lima et al., 2006), iVELAN (Lima et al., 2007)
and iNIP-PICKING (Oliveira, 2006) that are presented in this section.

iVIEW
The iVIEW is a tool for the visualization of seismic data with the functionalities of the three SU visualiza-
tion programs (suximage, suxwigb and suxcontour) in only one graphical interface, written initially in the
C++ programming language. Currently the iVIEW is being rewritten in the Java. This interface provides
a more robust and flexible data visualization tool, by using the same advantages of the softwares ximage,
xwigb, xcontour and others of the SU package.
WIT report <year> 3

The main features of iVIEW module are: a) The visualization modes: image, wiggle, contour, im-
age+wiggle and image+contour; b) visualization of multiple sections; c) zoom tool; e) dialog boxes for
header display and gain application.
We can see in Figure 3 the class diagram of the iVIEW, with the input and output data structure for
various types of visualization of seismic data. In Figure 4 we show an example with the image+wiggle
visualization mode using the iVIEW. It is important to point out that this result is fully based on the SU
package. In Figure 5 we show the trace visualization in wiggle mode, with headers information displayed
by a dialog window that is activated by a mouse click at the desired trace.

iVELAN
The iVELAN is an interactive software for velocity analysis using the common-midpoint technique, based
on a combination of SU programs. Its first version was written in C++, but currently it is being rewritten in
the Java language to guarantee better portability. The interactivity necessary to do the velocity analysis was
reached by using a flexible graphical interface based on SU codes, that are organized in classes by means
of a central work environment.
The main features of the iVELAN are: a) Selection and visualization of CMP sections into a given
interval; b) image visualization of the coherence semblance panel; c) images of stacked traces from nearby
CMP data sections by using constant velocities, the so-called constant velocity stack (CVS); d) visualiza-
tion of the hyperbolic curve on the CMP section as the mouse pointer moves in the image of coherence
(semblance) or CVS panel; e) the option to apply and remove normal moveout (NMO) correction.
An example of application of the iVELAN software is shown in Figure 6. On the left side we visualize
the CMP data section, the red line is the NMO hyperbola to be fitted on the reflection data for optimal
stacking velocity. On the upper left there are buttons to apply and to remove the NMO correction, and to
advance for the next CMP section. The coherence semblance image in the central part of the figure is used
to define interactively the best stack velocity at each ZO reflection traveltime. On the right of the same
figure we have the CVS panel that is built for various constant stack velocity values, and it can also be used
to define the optimal velocity to apply the NMO correction. In Figure 7 on the left we can see the NMO
corrected CMP data section.

iNIP-PICKING
The seismic velocity model is the most important information for performing pre-stack or post-stack depth
migrations. To solve the velocity problem, (Billete and Lambaré, 1998) proposed a tomography method
that depends only on zero-offset (ZO) traveltimes, and (Duveneck, 2004) presented a new tomography
method that uses the ZO traveltimes and two parameters that are determined by the Common-Reflection-
Surface (CRS) stack method (Garabito et al., 2001) and (Jäger et al., 2001), the radius of curvature of the
normal incidence point (NIP) wave and the emergence angle of the reflection normal ray, the so-called
NIP-CRS parameters. The amplitudes of the ZO traveltimes are extracted from ZO stacked section by
picking the seismic events, and the associated CRS parameters pairs are automatically selected from CRS
panels.
The iNIP-PICKING software is written in the Java language and it has two picking possibilities: point-
to-point and horizon based picking. In the former case the user must choose point-to-point seismic events
on the ZO stacked section, and in the last case some automatic criterion must be used to pick the ZO
traveltime from one selected point of a target seismic horizon.
As it was originally proposed by (Duveneck, 2004), in the point-to-point picking the amplitudes of the
ZO traveltimes are extracted from a ZO stacked section, by using the iNIP-PICKING software, and the
associated CRS parameters pairs are automatically selected from CRS panels.
In the other hand, for the horizon based picking, the iNIP-PICKING software follows the strategy:
a) Based on the semblance panels of the CRS stack processing, it is selected reflection events of the ZO
stacked section, so-called target seismic horizons; b) one point must be chosen of a target seismic horizon,
the so-called reference point;c) At this selected point, the orientation of the target seismic horizon is deter-
mined by using the emergence angle of the CRS stack processing; d) it is calculated the mean amplitude
of the predefined nearby points on the left and right positions of the reference point; e) the iNIP-PICKING
4 WIT report <year>

program uses the mean amplitude as criterion to searches for the best points on the left and right directions,
only points of amplitude higher than the mean value is an acceptable event. In order to improve the picking
result, in the final stage the user may edit the picked data to avoid undesirable events.
In Figure 8 we have an example of the target reflection event on the ZO section. The gray area indicates
the target reflector marked with the yellow line. In the Figure 9 there is an example of a curved seismic
horizon, where the red points on the event were picked by using the criterion above. In Figure 10 we look
at 1076 picked points on the ZO-CRS stacked section of the Marmousi data.

CONCLUSIONS
In this paper we presented the first versions of the BOTOSEIS platform, and its interactive modules iVIEW,
iVELAN and iNIP-PICKING. The BOTOSEIS is a platform for interactive applications of SU programs.
The interactive modules are SU based tools for data visualization, velocity analysis and ZO data picking,
respectively. These softwares can be considered important alternatives for using the facilities offered by the
SU package for doing seismic data processing. These softwares are written in the Java programming lan-
guage, in order to improve their portabilities and follow the free software philosophy like the SU package.
They are adequate for students, researchers and other professional interested in seismic data processing
developments.
In comparison with other softwares, like GêBr, the BOTOSEIS platform is more portable because it is
based on Java language, and it is interactively module structured for preserving the main characteristcs of
commercial seismic processing package.

ACKNOWLEDGMENTS
We thank PROINT-UFPA project, PIBIC-UFPA program, FINEP/CT-PETRO/PETROBRAS for support-
ing our project to develop graphical user interfaces.

REFERENCES
Billete, F. and Lambaré, G. (1998). Velocity mavro-model estimation from seismic reflection data by
stereotomography. Geophys. J. Int., 135(-):671–690.
Cohen, J. K. and Stockwell Jr., J. W. (2000). CWP/SU:Seismic Unix Release 34:A free package for seismic
research and processing. Colorado Schooll of Mines, Colorado, USA. Revised version available online
at http://timna.mines.edu/cwpcodes/.
Duveneck, E. (2004). Velocity model estimation with data derived wavefront attributes. Geophysics,
69(1):265–274.
Garabito, G., Cruz, J. C. R., Hubral, P., and Costa, J. (2001). Common reflection surface stack: a new
parameter search strategy by global optimization. Ext. abst. of the 71th. SEG mtg/San Antonio USA,
1(1):1–4.
Jäger, R., Mann, J., Höcht, G., and Hubral, P. (2001). Common reflection surface stack: image and
attributes. Geophysics, 66(-):97–109.
Lima, W. A., Garabito, G., and Cruz, J. C. R. (2006). Botoview: Uma interface gráfica para visualização
de dados no formato SU. Extended abstract II SimSBGf, 1(1):1–4.
Lima, W. A., Garabito, G., and Nazaré, C. P. (2007). Botovelan: Uma interface gráfica para análise de
velocidade utilizando o pacote Seismic Unix. Extended abstract 10th. Cong. of the SBGf, 1(1):1–4.
Oliveira, I. G. (2006). Estudo do método de inversão tomográfica 2D baseada nos atributos cinemáticos
da onda NIP e construção de interface gráfica para o processo de picking. UFPA, Belém, Brazil. MsC
Monograph.
Stockwell Jr., J. W. (1999). Free software in education:A case study of CWP/SU:Sesismic Unix. The
Leading Edge, 61(3):759–775.
WIT report <year> 5

Figure 1: The main work environment of the BOTOSEIS platform with flowchart and dialog box for
parameters edition.

Figure 2: The tool boxes to add interactively new programs in the BOTOSEIS platform.
6 WIT report <year>

Figure 3: The class diagram of the iVIEW module, with the input and output data structure for various
types of presentation of the seismic data.
WIT report <year> 7

Figure 4: Visualization in image+wiggle mode by using the iVIEW software.

Figure 5: Visualization in wiggle mode. The trace headers information are displayed in an appropriate
window.
8 WIT report <year>

Figure 6: Example of application of the iVELAN software for velocity analysis.

Figure 7: The NMO corrected CMP section applied using the picked velocities displayed in red line.
WIT report <year> 9

Figure 8: Example of the target reflector on the ZO section, with the reference point and the assigned angle
to start the iNIP-PICKING software.

Figure 9: Example of picked points on a curved seismic horizon, by using the iNIP-PICKING software.
10 WIT report <year>

Figure 10: Points on the ZO-CRS stacked section of the Marmousi data, as result of applying the iNIP-
PICKING software.
 This page is not a part of your actual paper.

Your paper and your review will appear in the following WIT report part:
Other topics
Your review will look like this:

Lima et al.: presents a new interactive platform, called BOTOSEIS, that is used to facilitate the application
of the Seismic Unix (SU) package, which was developed by the Center of Wave Phenomena (CWP) of the
Colorado School of Mines. The BOTOSEIS is built for applying the SU programs by means of graphical
user interface. It is developed in Java programming language. The BOTOSEIS platform deserves for
creating and managing projects, lines and flowcharts from only one interactive environment. By using the
BOTOSEIS the user can run and control several process at one time, and also easily include new SU based
applications.

View publication stats