Scribd Logo
Upload

Welcome to Scribd!

  • 73 views

    AS3600-2018 Shear Comparison (20190107) - With Mathcad

    Uploaded by

    shashank sharma
    This document summarizes the bending and shear capacity calculations for a rectangular reinforced concrete beam based on AS3600-2018 standards. The beam has a depth of 500 mm, width of 1000 mm, and 10 longitudinal reinforcing bars with a diameter of 24 mm spaced at 100 mm. The bending capacity calculations show a factored moment capacity of 673 kNm. The shear capacity is below the minimum requirement using various calculation methods in the standard.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    AS3600-2018 Shear Comparison (20190107) - With Mathcad

    Uploaded by

    shashank sharma
    73 views2 pages
    This document summarizes the bending and shear capacity calculations for a rectangular reinforced concrete beam based on AS3600-2018 standards. The beam has a depth of 500 mm, width of 1000 mm, and 10 longitudinal reinforcing bars with a diameter of 24 mm spaced at 100 mm. The bending capacity calculations show a factored moment capacity of 673 kNm. The shear capacity is below the minimum requirement using various calculation methods in the standard.

    Original Title

    AS3600-2018 Shear Comparison (20190107)_with mathcad

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the bending and shear capacity calculations for a rectangular reinforced concrete beam based on AS3600-2018 standards. The beam has a depth of 500 mm, width of 1000 mm, and 10 longitudinal reinforcing bars with a diameter of 24 mm spaced at 100 mm. The bending capacity calculations show a factored moment capacity of 673 kNm. The shear capacity is below the minimum requirement using various calculation methods in the standard.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    73 views2 pages

    AS3600-2018 Shear Comparison (20190107) - With Mathcad

    Uploaded by

    shashank sharma
    This document summarizes the bending and shear capacity calculations for a rectangular reinforced concrete beam based on AS3600-2018 standards. The beam has a depth of 500 mm, width of 1000 mm, and 10 longitudinal reinforcing bars with a diameter of 24 mm spaced at 100 mm. The bending capacity calculations show a factored moment capacity of 673 kNm. The shear capacity is below the minimum requirement using various calculation methods in the standard.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    Rectangular Beam Bending and Shear Capacity - Ignoring Compression Reinforcement - AS3600-2018

    Inputs
    Concrete Longitudinal Reinforcement
    D 500 mm Bar size 24 mm
    Bc 1000 mm Bar crs 100 mm
    Bv 1000 mm # bars 10 -
    Cover 70 mm Fy 500 MPa
    f'c 32 MPa Es 200000 MPa
    Aggregate 16 mm p 1.15%

    Bending Capacity
    d alpha,2 gamma Ast Ast,min Tf,yield ku,yield ku,b
    mm - - mm2 mm2 N - -
    394 0.802 0.89 4524 861 2.26E+06 0.251 0.545

    Shear Capacity - General Method (Clause 8.2.4.2)


    dv Epsilon,x Asv Asv,min kv Vuc theta,v Vus
    mm [strain] mm2 mm2 - kN degrees kN
    360 0.00114 0 272 0.141 287 37.0 0
    Shear reinforcement is less than the minimum requirement

    Shear Capacity - Simplified Method (Clause 8.2.4.3)


    Asv Asv,min dv kv Vuc theta,v Vus Vu,total
    mm2 mm2 mm - kN degrees kN kN
    0 272 360 0.1 204 36 0 204
    Shear reinforcement is less than the minimum requirement

    Shear Capacity - AS3600-2009 for comparison - Beta,2 and Beta,3 taken as 1.0 each
    Asv Asv,min Beta,1 fcv Ast/(bv*do) Vuc Vu,max Asv,max
    mm2 mm2 - N/mm2 - kN kN mm2
    0 210 1.3266 3.17 1.15% 374 2522 3270
    Shear reinforcement is less than the minimum requirement
    Shear Fitments and Section Stresses
    Stirrup 0 mm
    # legs 2-
    Stirrup crs 300 mm
    Fsyf 500 MPa
    M* 673 kNm
    V* 201 kN

    Muo phi phi.Muo


    kNm - kNm
    792 0.85 673

    Vu,tot Vu,max phi phi,Vu


    kN kN - kN
    287 3045 0.7 201

    Vu,max phi phi,Vu cf MCFT


    kN - kN -
    3013 0.70 143 71%

    theta,v Vus Vu,tot phi phi,Vu cf MCFT


    degrees kN kN - kN
    30.0 0 374 0.7 262 131%

    You might also like