G3412 272-447 bkW

Gas Petroleum (365-600 bhp)

Engine 1500 & 1800 rpm

2.0% O2 Rating

CAT® ENGINE SPECIFICATIONS

V-12, 4-Stroke-Cycle
Bore.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 mm (5.4 in.)
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 mm (6 in.)
Displacement.. . . . . . . . . . . . . . . . . . . . . . . 27 L (1649 cu. in.)
Aspiration.. . . . . . . . . . . . . . . . . . . Turbocharged for ATAAC
Governor and Protection.. . . . . . . . . . . . . . . Woodward PSG
Combustion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rich Burn
Engine Weight, net dry (approx).. . . . . . 2141 kg (4720 lb)
Power Density.. . . . . . . . . . . . . . . . 4.79 kg/kW (7.86 lb/bhp)
Power per Displacement.. . . . . . . . . . . . . . . . . . . 22.20 bhp/L
Engine Only Cooling System Capacity.. . . 75.7 L (20 gal)
Lube Oil System (refill).. . . . . . . . . . . . . . . . 170.3 L (45 gal)
Shown with Oil Change Interval. . . . . . . . . . . . . . . . . . . . . . . . . . 750 hours
Optional Equipment Rotation (from flywheel end).. . . . . . . . . Counterclockwise
Flywheel and Flywheel Housing.. . . . . . . . . . . . . SAE No. 0
Flywheel Teeth.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

FEATURES
Engine Design Product Support Offered Through Global Cat Dealer
-  Improved reliability and durability Network
- Ability to burn a wide spectrum of gaseous fuels More than 2,200 dealer outlets
- Robust diesel strength design prolongs life and lowers Cat factory-trained dealer technicians service every
owning and operating costs aspect of your petroleum engine
- Broad operating speed range
Cat parts and labor warranty
Full Range of Attachments Preventive maintenance agreements available for repair-
Large variety of factory-installed engine attachments before-failure options
reduces packaging time
S•O•SSM program matches your oil and coolant samples
Testing against Caterpillar set standards to determine:
Every engine is full-load tested to ensure proper engine - Internal engine component condition
performance. - Presence of unwanted fluids
- Presence of combustion by-products
Gas Engine Rating Pro
- Site-specific oil change interval
GERP is a PC-based program designed to provide site
performance capabilities for Cat® natural gas engines Over 80 Years of Engine Manufacturing Experience
for the gas compression industry. GERP provides Over 60 years of natural gas engine production
engine data for your site’s altitude, ambient temperature, Ownership of these manufacturing processes enables
fuel, engine coolant heat rejection, performance data, Caterpillar to produce high quality, dependable products.
installation drawings, spec sheets, and pump curves. - Casts engine blocks, heads, cylinder liners, and
flywheel housings
- Machines critical components
- Assembles complete engine

Web Site
For all your petroleum power requirements, visit
www.catoilandgas.cat.com.

LEHW0032-00 Page 1 of 4
Supersedes LEHW0748-05
 G3412 GAS PETROLEUM ENGINE
272-447 bkW (365-600 bhp)

STANDARD EQUIPMENT
Air Inlet System Ignition System
Air cleaner — single element with service indicator Digital ignition system
Control System Instrumentation
Governor — Woodward PSG mechanical Service meter
Governor control — positive locking
Lube System
Cooling System Crankcase breather — top mounted
Thermostats and housing Oil cooler
Jacket water pump Oil filter — RH
Aftercooler water pump Auxiliary oil reservoir
Aftercooler core Rear sump oil pan
Oil filler in valve cover and dipstick — RH
Exhaust System
Watercooled exhaust manifolds Mounting System
Dry exhaust elbow Engine supports
Flywheel & Flywheel Housing Protection System
SAE No. 0 flywheel Shutoff
SAE No. 0 flywheel housing
SAE standard rotation General
Paint — Cat yellow
Fuel System Crankshaft vibration damper and drive pulleys
Gas pressure regulator Lifting eyes
Natural gas carburetor

OPTIONAL EQUIPMENT
Air Inlet System Ignition System
Air cleaner CSA ignition
Air inlet adapter Ignition ground wiring harness
Precleaner Power supply — digital ignition system
Air cleaner rain cap
Instrumentation
Charging System Alarm module
Battery chargers Gauges and instrument panels
Charging alternators
Ammeter gauge Lube System
Ammeter gauge and wiring Auxiliary oil reservoir removal
Control mounting Lubricating oil

Control System Mounting System

EG3P/2301A speed control governor Vibration isolators
PSG electric governor Power Take-Offs
PSG pneumatic governor Auxiliary drive pulleys
Cooling System Enclosed clutch
Radiators Clutch support
Blower fan and fan drives for customer supplied Front stub shaft
radiators Flywheel stub shaft
ATAAC conversion Pulley removal
Aftercooler Protection System
Expansion tank Gas valves
Heat exchanger Status control box interconnect wiring harness
Exhaust System Starting System
Flexible fittings Air starting motor
Elbows Electric air start control
Flanges Air pressure regulator
Rain caps Air silencer
Mufflers Electric starting motors — single 24-volt
Fuel System Starting aids
Dual gas regulator Battery sets (24-volt dry), cables, and rack
Low energy fuel carburetor General
Low pressure gas conversion Tool set
Propane and natural gas valve and jet kits Digital diagnostic tool
Fuel filter

LEHW0032-00 Page 2 of 4
Supersedes LEHW0748-05
 G3412 GAS PETROLEUM ENGINE
272-447 bkW (365-600 bhp)

technical data

G3412 Gas Petroleum Engine — 1500 & 1800 rpm

DM8646-00 DM5206-04 DM5101-01

Engine Power
@ 100% Load bkW (bhp) 373 (500) 447 (600) 272 (365)
@ 75% Load bkW (bhp) 280 (375) 336 (450) 204 (274)

Engine Speed rpm 1500 1800 1800

Max Altitude @ Rated Torque
and 38°C (100°F) m (ft) 304.8 (1000) 609.6 (2000) 0
Speed Turndown @ Max
Altitude, Rated Torque,
and 38°C (100°F) % 13.5 22 0

SCAC Temperature °C (°F) 54 (130) 54 (130) N/A

Emissions*
NOx g/bkW-hr (g/bhp-hr) 19.07 (14.22) 31.2 (23.27) 17.9 (13.35)
CO g/bkW-hr (g/bhp-hr) 19.04 (14.2) 2.14 (1.6) 17.9 (13.35)
CO2 g/bkW-hr (g/bhp-hr) 609 (454) 635 (437) —
VOC** g/bkW-hr (g/bhp-hr) 0.35 (0.26) 0.15 (0.11) —

Fuel Consumption***
@ 100% Load MJ/bkW-hr (Btu/bhp-hr) 11.04 (7800) 10.2 (7210) 11.10 (7847)
@ 75% Load MJ/bkW-hr (Btu/bhp-hr) 11.27 (7964) 11.05 (7813) 12.15 (8589)

Heat Balance
Heat Rejection to Jacket Water
@ 100% Load bkW (Btu/min) 399.05 (22,714) 393 (22,333) 270.6 (15,390)
@ 75% Load bkW (Btu/min) 319.7 (18,197) 368 (20,935) 245.3 (13,946)

Heat Rejection to Aftercooler

@ 100% Load bkW (Btu/min) 7.92 (451) 41.2 (2343) N/A
@ 75% Load bkW (Btu/min) 3.04 (173) 208 (1639) N/A

Heat Rejection to Exhaust

@ 100% Load bkW (Btu/min) 254.01 (14,458) 285 (16,234) 219.9 (12,506)
@ 75% Load bkW (Btu/min) 187.09 (10,649) 208 (11,835) 173.1 (9,843)

Exhaust System
Exhaust Gas Flow Rate
@ 100% Load m3/min (cfm) 59.55 (2103) 69.97 (2471) 49.16 (1736)
@ 75% Load m3/min (cfm) 44.77 (1581) 51.71 (1826) 39.4 (1391)

Exhaust Stack Temperature

@ 100% Load °C (°F) 523.33 (974) 510 (950) 622.2 (1152)
@ 75% Load °C (°F) 496.11 (925) 480 (896) 598.3 (1109)

Intake System
Air Inlet Flow Rate
@ 100% Load m3/min (scfm) 19.85 (701) 23.87 (843) 14.6 (515)
@ 75% Load m3/min (scfm) 15.46 (546) 18.24 (644) 12.01 (424)

Gas Pressure kPag (psig) 137.9-172.4 (20-25) 137.9-172.4 (20-25) 10-35 (1.5-5)

*at 100% load and speed, all values are listed as not to exceed
**Volatile organic compounds as defined in U.S. EPA 40 CFR 60, subpart JJJJ
***ISO 3046/1

LEHW0032-00 Page 3 of 4
Supersedes LEHW0748-05
 G3412 GAS PETROLEUM ENGINE
272-447 bkW (365-600 bhp)

GAS PETROLEUM ENGINE

2086.9 mm 1223.8 mm
(82.16 in.) (48.18 in.)

1542.0 mm
(60.71 in.)

package dimensions Note: G

 eneral configuration not to be used for
installation. See general dimension drawings
Length mm (in.) 2086.9 (82.16)
for detail.
Width mm (in.) 1223.8 (48.18)
Height mm (in.) 1542.0 (60.71)
Shipping Weight kg (lb) 2141 (4720)

RATING definitions and CONDITIONS

Engine performance is obtained in accordance with SAE Conditions: Power for gas engines is based on fuel
J1995, ISO3046/1, BS5514/1, and DIN6271/1 standards. having an LHV of 33.74 kJ/L (905 Btu/cu ft) at 101 kPa
(29.91 in. Hg) and 15° C (59° F). Fuel rate is based on a
Transient response data is acquired from an engine/
cubic meter at 100 kPa (29.61 in. Hg) and 15.6° C
generator combination at normal operating temperature
(60.1° F). Air flow is based on a cubic foot at 100 kPa
and in accordance with ISO3046/1 standard ambient
(29.61 in. Hg) and 25° C (77° F). Exhaust flow is based
conditions. Also in accordance with SAE J1995,
on a cubic foot at 100 kPa (29.61 in. Hg) and stack
BS5514/1, and DIN6271/1 standard reference conditions.
temperature.

Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, S•O•S, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Performance Numbers: DM8646-00, DM5206-04, DM5101-01 ©2009 Caterpillar
LEHW0032-00 (11-09) All rights reserved.
Supersedes LEHW0748-05