Scribd
Upload
56 views1 page

Synchronous Drive Design - Solution #35100, Drive #1

This document provides the design details for a synchronous drive solution with a part number of 35100-1. It lists the bill of materials including the driver and driven pulleys and bushings, as well as the belt. It specifies the input and driven speeds, center distance, and belt speed. Tensioning instructions are provided to apply the proper force to deflect the belt by 0.08 inches, resulting in a vibration frequency of 161 Hz when tapped.

Uploaded by

mac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

Synchronous Drive Design - Solution #35100, Drive #1

This document provides the design details for a synchronous drive solution with a part number of 35100-1. It lists the bill of materials including the driver and driven pulleys and bushings, as well as the belt. It specifies the input and driven speeds, center distance, and belt speed. Tensioning instructions are provided to apply the proper force to deflect the belt by 0.08 inches, resulting in a vibration frequency of 161 Hz when tapped.

Uploaded by

mac
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

3/30/2020 Synchronous Drive Design: Solution #35100, Drive #1

Synchronous Drive Design: Solution #35100, Drive #1


Created By: Mukesh Chitte
Company: Govind Engineering
Address Line 1: Satpur
Address Line 2: nashiik
Address Line 3:
Phone: 08806735595
Email: [email protected]
Solution Tags: Date Created: 3/30/2020, 1:23:30 AM ID: 35100-1

Bill of Materials
Part Number Quantity
Driver Pulley QD14H100 (2.23 inch P.D.) 1
Driver Bushing JAX19MM 1
Driven Pulley TL20H100 (3.18 inch P.D.) 1
Driven Bushing 1210X15MM 1
Belt 185H075G 1

5
Drive Details
Input Actual
Input Horsepower 1
Service Factor 1.7 2.66
Design Horsepower 1.70 2.66

Driver Speed (RPM) 1440


Driven Speed (RPM) 1000 1008

Center Distance (inches) 4-5 4.98


Belt Speed (FPM) 840

Tensioning Instructions: Apply between 1.86 and 2.79 lbs. of force to deflect the belt 0.08 inches. Or, using the vibration method: When the belt is
tapped, it should vibrate at 161 Hz.

712 N Fail Rd | La Porte, IN 46350 TOLL FREE | 877.787.4022 FAX | 219.324.2694 www.bbman.com

bbman.productselectionpro.com/#s=35100,IL,b5blhLX72r7eqSmt 1/1

You might also like