Scribd
Upload
224 views5 pages

Instruction - Factory Inspection - Low Voltage Panel

This document provides instructions for factory inspection of low voltage panels. It lists rated insulation voltages from less than or equal to 60 volts to between 1000 and 1500 volts for direct current only. It also lists the corresponding test voltages in AC Vrms that should be applied during inspection to check for any non-conformities, recording any issues found.

Uploaded by

Daniel Cabasa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
224 views5 pages

Instruction - Factory Inspection - Low Voltage Panel

This document provides instructions for factory inspection of low voltage panels. It lists rated insulation voltages from less than or equal to 60 volts to between 1000 and 1500 volts for direct current only. It also lists the corresponding test voltages in AC Vrms that should be applied during inspection to check for any non-conformities, recording any issues found.

Uploaded by

Daniel Cabasa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

INSTRUCTION - FACTORY INSPECTION - LOW VOLTAGE PANEL

Rated Insulation Voltage (Ui): Ui≤60 60≤300 300≤660 660≤800 800≤1000 1000≤1500*(*DC Voltage only)
Test Voltage AC Vrms: 1000 2000 2500 3000 3500 3500

During the AC Vrms voltage tests,


- Record non-conformity.
(If applicable)

You might also like