Schools Division Office Urdaneta City Lananpin National High School

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 3

Region I

Schools Division Office Urdaneta City


LANANPIN NATIONAL HIGH SCHOOL
Urdaneta City Pangasinan

3RD QUARTER EXAMINATION


COMPUTER SYSTEMS SERVICING
Name: ______________________________________________ LRN: ________________________
Grade & Section: _____________________________________ Subject: _____________________
Teacher: ____________________________________________ Score:_______________________
I.DIRECTIONS. Read the questions carefully and select the correct answer. Write your answer before each number.

1. Hardware can be defined as:


a. the parts of a computer system that you can touch
b. the peripherals and operating system of a computer
c. the machines and programs making up a computer
d. the programs needed to run a computer
2. What does ROM stands for?
a. Random Only Memory
b. Read Only Memory
c. Random Open Memory
d. Read Over Memory
3. A star topology provide a common central connection point for nodes on the network called _________
a. Modem c. Switch
b. Panel d. Router
4. Which tool is used to loosen or tighten cross-head screws?
a. Hex driver c. Torx screwdriver
b. Philips head screwdriver d. flathead screwdriver
5. 25. Which tool is used to strip and cut wires?
a. Pliers c. Needle Nose Pliers
b. Wire cutter d. Part Retriever
6. What is another term for Part Retriever?
a. Pearl Catcher c. Golden Retriever
b. Part Picker d. Nose Retriever
7. The Best practice in assembling the System Unit.
I. Install the CPU and RAM on the motherboard
II. Install the power supply unit.
III. Install expansion cards
IV. Install all drives
V. Install motherboard
a. V, I, IV, III, II c. V, II, III, I, IV
b. I, V, III, IV, II d. I, II, III, IV, V
8. What is the best practice when working inside the system unit and installing and removing components?
a. Touch the door knob to ground yourself before going into this case
b. Place all components on the motherboard to keep them grounded
c. use plastic tools
d. all of the above
9. What term described the flow of static electrical charge from a person to the inside of the PC?
a. EMI c. FDD
b. ESD d. PCB
10. What is the first thing to do before disassembling a system unit?
a. Save all the documents
b. Fully shut down and unplug the computer
c. Established an ESD
d. All of the above
11. What is the best way to prevent damaging your PC with static electricity?
a. Place your PC on a rubber mat c. Wear and ESD writ strap
b. Wear leather soled shoes d. Static electricity doesn’t really hurt a PC
12. Which of the following is not true when on working in PC’s?
a. Do not work on computer when you are wet because you might get electrocuted.
b. Do not remove internal devices of the computer when it is turned on.
c. Be sure not to mix electronic components and water.
d. Ask for assistance from your classmate when it comes on dealing with computer devices.
13. Which of the following department is in charge of computer system and network installation?
a. Accounting Department c. Electrical Department
b. Building Administrator d. ICT Department
14. Who should be the only person allowed to install and maintain a computer system network?
a. Engineer c. Supervisor
b. Manager d. Technician
15. Arrange the following procedures in installing windows 7 operating system.
I. Wait for the computer to boot in windows 7 interface
II. Delete and Create partitions
III. Format Partitions
IV. Restart the computer
V. Install windows 7
a. V, I, IV, III, II c. II, III, IV, I, V
b. V, II, III, IV, I d. I, II, III, IV, V
16. In a typical star topology network, which cable are we going to use in order to build the entire network?
a. STP Cable c. Fiber optic cable
b. UTP Cable d. Coaxial cable
17. A type of computer which is intended be used on a single location.
a. Desktop Computer c. Netbook
b. Laptop d.Personal Computer
18. The Best practice in disassembling the System Unit.
I. Remove the CPU and RAM on the motherboard
II. Remove the power supply unit.
III. Remove expansion cards
IV. Remove all drives
VI. Remove motherboard
a. V, I, IV, III, II c. II, III, IV, I, V
b. I, V, III, IV, II d. I, II, III, IV, V
19. Which of the following is NOT a System Software?
a. MC OS b. MS Office c. Linux d.Windows 7
20. A star topology provide a common central connection point for nodes on the network called _________
a. Modem b. Panel c. Switch d. Router
21. UTP Stands for?
a. Unshielded Twisted Pair c. Unshielded Twisted Pier
b. Untwisted Twisted Pair d. Untwisted Twisted Pier
22. STP Stands for
a. Shielded Twisted Port c. Shielded Twist Pier
b. Shielded Twisted Pair d. Shielded Twisted Port
23. Tool use to create a UTP Cable.
a. Plier b. Crimping Tool c. Wire Stripper d. Lan Tester

24. Tool to test the connectivity of network cable.


a. Multi Tester b. Voltmeter c. Ohm meter d. LAN Tester
25. Which of the following will identify this network cable color coding WO,O, WG,Bl,WBl,G,WB,B.
a. Patch A b. Patch B C. Crossover d. Straight Through
26. Which of the following will identify this network cable color coding WG,G, WO,Bl,WBl,O,WB,B.
Patch A b. Patch B C. Crossover d. Straight Through
27. A Peer to Peer network requires a ___________ cable to communicate both computers.
a. Crossover b. Straight Through c. UTP d. STP
28. How many cables needed in a 10 units of computer to create a star topology network?
a. 10 b. 11 c. 9 d. 12
29. In a typical network cabling which type of cable is commonly use in a network.?
a. Patch A b. Patch B C. Crossover d. Straight Through
30. The first Operating System a command line interface that only one program could run at a time.
a. BIOS b. DOS c. DISKPART d. FORMATDISK
31. cls DOS command means?
a. To Clear the Screen
b. Display list of contents of current directory.
c. Displays the contents of a text file.
d. Copies one or more files to another location
32. DIR DOS Command means?
a. Display list of contents of current directory
b. Create Directory Command
c. Change directory or display current directory path.
d. Clear the window
33. Type of material that is used to transfer data or electricity from one component to another?
a. Cables b. Connectors c. Software d. Tools
34. The best thing to do if a power cable has an exposed wire.
a. A. buy a brand new replacement cable c. repair the cable and splice with electrical tape
b. B. replace the cable with a repaired cable d. buy a surplus replacement cable
35. . Straight Trough is for PC to Switch, Crossover is for?
a. PC to Router c. PC to laptop
b. PC to Modem d. Laptop to Switch
36. Any device that is connected to a network such as computer, printer, or data storage device.
a. Client b. Node c. host D. Server
37. What term is used to describe a computer system that normally gets resources from a more powerful
computer in the network?
a. Client b. Route c .Protocol d. Server
38. What tool is used to insert the UTP cable inside the RJ45 ?
a. Punch Tool b. Splicer c. Crimping Tool d. LAN Tester
39. is a type of connector commonly used for Ethernet networking.
a. RJ45 b. RJ11 c. RJ 16 d. RJ 38
40. The following are the main function of the server EXCEPT?
a. Store, retrieve and send computer files and data to other computers on a network.
b. Share data as well as to share resources and distribute work.
c. Provide policies and restrictions to all clients connected.
d. Is a central computer provides OS and connection to all clients
41. It refers to the layout, configuration of a network that consists of cables, computers, and other peripherals.
a. Gas Topology b. Network Topology c. Wireless Topology Communication Topology

42. Which is the oldest and most common transmission line.?


a. Coaxial Cable Twisted Pair cable c. Fiber optic cable d. None of the Above
43. The components of the network are
a. Terminals, computers and software c. Telecommunication Processors
b. Telecommunication Media d. None of the Above
44. WAN stands for
a. Wire and Network c. Wire Accessible Network
b. Widely Accessible Network d. Wide Area Network
45. In which network the ends are not connected?
a. Bus Topology b. Ring Topology c. Star Topology d. All of the above
46. A __________________ is a group of to or more computer systems linked together.
a. Network b. Terminals c. Architecture d. Media
47. Consist if one or more hair-tin filaments of glass fiber wrapped in a protective jacket.
a. Fiber optics Cable b. UTP Cable c. Coaxial Cable d. Electronic wire Cable
48. Who should be the only person allowed to install and maintain a computer system network?
a. Engineer b. Manage c. Supervisor d. Technician
49. In case of accidents inside the computer laboratory who should be called?
Student b. Teacher in Charge c. Principal d. Security Guard
50. What would you suggest in order to come up with a strong admin password?
a. Use password that has combination
b. Use a password that can easily remembered
c. Use a numerical combination password
d. Use Alphabetical combination password

You might also like