Scribd
Upload
990 views3 pages

Description: DTC B158F AV Signal Stoppage (Low Battery Voltage)

This document provides troubleshooting steps for a 2014-2016 Toyota IS200T, IS250, IS300, or IS350 that has a B158F diagnostic trouble code indicating an audio or video signal stoppage due to low battery voltage. The steps include checking the vehicle signal and battery voltage, clearing any diagnostic trouble codes, checking for codes again, and checking the voltage on the radio receiver assembly power source harness and connector if needed.

Uploaded by

Jack Cardiag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
990 views3 pages

Description: DTC B158F AV Signal Stoppage (Low Battery Voltage)

This document provides troubleshooting steps for a 2014-2016 Toyota IS200T, IS250, IS300, or IS350 that has a B158F diagnostic trouble code indicating an audio or video signal stoppage due to low battery voltage. The steps include checking the vehicle signal and battery voltage, clearing any diagnostic trouble codes, checking for codes again, and checking the voltage on the radio receiver assembly power source harness and connector if needed.

Uploaded by

Jack Cardiag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B158F; AV Signal Stoppage (Low Battery Voltage); 2014 ­ 2016 MY IS200T IS250 IS300 IS350 [04/2013 ­…

Last Modified: 03­03­2017 6.7:8.0.40 Doc ID: RM1000000007A92


Model Year Start: 2014 Model: IS200T Prod Date Range: [04/2013 ­           ]

Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B158F; AV Signal Stoppage (Low Battery Voltage); 2014 ­ 2016
MY IS200T IS250 IS300 IS350 [04/2013 ­        ]

DTC B158F AV Signal Stoppage (Low Battery Voltage)

DESCRIPTION
This DTC is stored when a video or audio signal is interrupted due to battery voltage input to the radio receiver
assembly dropping temporarily.

DTC DETECTION ITEM DTC DETECTION CONDITION TROUBLE AREA


NO.

AV Signal Stoppage (Low Battery A video or audio signal is interrupted when the battery Radio receiver


B158F
Voltage) voltage drops assembly

WIRING DIAGRAM

CAUTION / NOTICE / HINT
NOTICE:
After replacing the radio receiver assembly of vehicles subscribed to pay­type satellite radio broadcasts, XM radio
ID registration is necessary (w/ SDARS System).
Inspect the fuses for circuits related to this system before performing the following procedure.

PROCEDURE

1. CHECK VEHICLE SIGNAL (OPERATION CHECK)

https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 1/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B158F; AV Signal Stoppage (Low Battery Voltage); 2014 ­ 2016 MY IS200T IS250 IS300 IS350 [04/2013 ­…

(a) Enter the "Vehicle Signal Check Mode" screen.
Refer to Check Vehicle Signal in Operation Check.

Click here 

(b) Measure the battery voltage.
Standard Voltage:
11 to 14 V

HINT:
This display is updated once per second.

NG GO TO STEP 3

OK

2. CHECK DTC

(a) Clear the DTCs.

Click here 

Body Electrical > Navigation System > Clear DTCs

(b) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.

OK END

NG REPLACE RADIO RECEIVER ASSEMBLY

3. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY POWER SOURCE)

(a) Disconnect the K70 radio receiver assembly connector.

https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 2/3
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: B158F; AV Signal Stoppage (Low Battery Voltage); 2014 ­ 2016 MY IS200T IS250 IS300 IS350 [04/2013 ­…

(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:

TESTER CONNECTION CONDITION SPECIFIED CONDITION

K70­4 (+B1) ­ Body ground Always 11 to 14 V

OK REPLACE RADIO RECEIVER ASSEMBLY

NG REPAIR OR REPLACE HARNESS OR CONNECTOR

https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 3/3

You might also like