This document provides specifications for a single phase submersible pump model MXHLM 202E including flow rate of 1.05 m3/h, head of 20 m, power consumption of 0.19 kW, and intended application of swimming pools. Materials include 316L stainless steel, PTFE, and ceramic. Dimensions such as port sizes, mounting dimensions, and casing dimensions are listed in metric units.
This document provides specifications for a single phase submersible pump model MXHLM 202E including flow rate of 1.05 m3/h, head of 20 m, power consumption of 0.19 kW, and intended application of swimming pools. Materials include 316L stainless steel, PTFE, and ceramic. Dimensions such as port sizes, mounting dimensions, and casing dimensions are listed in metric units.
This document provides specifications for a single phase submersible pump model MXHLM 202E including flow rate of 1.05 m3/h, head of 20 m, power consumption of 0.19 kW, and intended application of swimming pools. Materials include 316L stainless steel, PTFE, and ceramic. Dimensions such as port sizes, mounting dimensions, and casing dimensions are listed in metric units.
This document provides specifications for a single phase submersible pump model MXHLM 202E including flow rate of 1.05 m3/h, head of 20 m, power consumption of 0.19 kW, and intended application of swimming pools. Materials include 316L stainless steel, PTFE, and ceramic. Dimensions such as port sizes, mounting dimensions, and casing dimensions are listed in metric units.
Head: 20 m Frequency: 50 Hz Poles: 2 Phases: single-phase Power consumption (kW): 0.19 Efficiency: 30.25 % NPSH: 1.88 m Application: Swimming-pools Search range: 10 %
PUMP AND MOTOR DATA
n (rpm): 2800 fn (Hz): 50
Max working pressure (bar): 8 Poles: 2 H max (m): 20.50 In (A): 2.3 H min (m): 5.50 PF: 0.98 Q min (mc/h): 1.00 C (mF): 10 Q max (mc/h): 4.80 Vc (V): 450 Pn (kW): 0.33 Min liquid temperature (°C): -15.00 °C Pn (HP): 0.45 Max liquid temperature (°C): 110 Motor phase: 1~ Weight (kg): 6.680 Un (V): 230
MATERIALS
Pump Casing: Cr-Ni-Mo steel 1.4404 EN 10088 Wear ring impeller-diffuser: PTFE (AISI 316L) Spacer Sleeve: Cr-Ni-Mo steel 1.4404 EN 10088 Casing Cover: Cr-Ni-Mo steel 1.4404 EN 10088 (AISI 316L) (AISI 316L) Shaft: Cr-Ni-Mo steel 1.4404 EN 10088 Stage Casing: Cr-Ni-Mo steel 1.4404 EN 10088 (AISI 316L) (AISI 316L) Mechanichal Seal: Ceramic Alumina-Carbon-EPDM Impeller: Cr-Ni-Mo steel 1.4404 EN 10088 (AISI 316L)
dn1: G 1 ¼ dn2: G 1 a: 94.00 mm m1: 28.00 mm m3: 8.00 mm n1: 146.00 mm n2: 112.00 mm b: 30.00 mm fM: 331.00 mm l5: 160 g1: 10.00 mm h1: 127.00 mm h2: 57.00 mm HD: 176.00 mm w: 88.00 mm w1: 98.50 mm
