Fully Programmable Three Phase Voltage Monitoring Relay (With NFC)
Fully Programmable Three Phase Voltage Monitoring Relay (With NFC)
Fully Programmable Three Phase Voltage Monitoring Relay (With NFC)
• OVERVIEW
The LPRC/2-NFC is a multi-function, 3-Phase voltage monitoring relay designed for both 3-wire and 4-wire supplies and is ideal where several parameters need to be monitored. It
can monitor for under voltage, over voltage, phase loss, neutral loss (when set for 4-wire monitoring), phase reversal and phase asymmetry. The parameters which need to be
monitored are configured and set using the app.
Within the app (and the initial setting up process), the user can choose from either 3-wire (Delta) or 4-wire (Y/Star) monitoring and select the voltage to be monitored from the
nominal supply voltage options provided. From here, settings for the trip levels, time delays and relay operation are made. There are adjustments provided also for the setting of
the Hysteresis which sets the threshold at which the unit returns from a no-fault condition.
As the relays are independent, they can be assigned to operate against a particular parameter (i.e. Relay 1 assigned to operate only on phase reversal, Relay 2 assigned to operate
only on under or over voltage) so making this product truly universal. The relays can be configured to operate simultaneously if required i.e. operating as a DPDT relay.
Utilising NFC technology also adds the benefit of unit configuration taking place without the need for the unit to be powered. This feature is useful where a panel needs to be shut
down and power removed (for safety reasons) before any work or alterations can be made.
The unit also benefits from using a switch mode power supply which is not affected by applications that maybe prone to noise (i.e. generated from inverters). This increases the
products resilience to any additional heat dissipation which otherwise would be generated in non-switch mode based products.
Note that phase and neutral loss detection are always enabled and cannot be altered
➊
A typical setting up procedure is carried out as follows:
In addition to the default functionality of the LED’s as described above, the LED’s are
also used to indicate a particular state or condition that the unit may be measuring or
following a trip event. Refer to next page for further information.
Broyce Control Ltd., Pool Street, Wolverhampton, West Midlands WV2 4HN. England LPRC_2-NFC-2-A.DOCX
Tel: +44 (0) 1902 773746 Fax: +44 (0) 1902 420639 Email: sales@broycecontrol.com Web: www.broycecontrol.com Page 1 of 2
The Information provided in this literature is believed to be accurate (subject to change without prior notice); however, use of such information shall be entirely at the user’s own risk. 1911
Type: LPRC/2-NFC
Fully Programmable Three Phase Voltage Monitoring Relay (with NFC)
Electrical life:
Standards
Product:
Conforms to: CE and RoHS Compliant. C-tick
29
Withdraw clips
fully when
surface mounting
EMC: Immunity: EN 61000-6-2
92 (+/- 1mm)
all dimensions in mm. Emissions: EN 61000-6-3
Broyce Control Ltd., Pool Street, Wolverhampton, West Midlands WV2 4HN. England LPRC_2-NFC-2-A.DOCX
Tel: +44 (0) 1902 773746 Fax: +44 (0) 1902 420639 Email: sales@broycecontrol.com Web: www.broycecontrol.com Page 2 of 2
The Information provided in this literature is believed to be accurate (subject to change without prior notice); however, use of such information shall be entirely at the user’s own risk. 1911