Indeck HRSG Brochure PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

Large Utility Combine Cycle Power Plants

I-HRSG The solution for 1. CT Expansion Joint 12. IP Superheater


efficient reliable steam
2. Flue Gas Inlet Duct 13. IP Evaporator
generation…
The combined cycle plant is 3. Distribution Grid 14. LP Superheater
a popular choice to meet the 4. HP Superheater 15. LP Evaporator
world’s power generation needs.
The use of Indeck’s Steam 5. Duct Burner 16. IP Economizer
Generators to recover heat from 6. Reheater 17. Stack Damper
gas turbine exhaust is vital for
maximum performance, higher 7. HP Evaporator 18. HP Drum
efficiency, and greater cost
8. HP Economizer 19. IP Drum
effectiveness.
9. CO Catalyst 20. LP Drum
For the past 175 years, industry
and utilities have turned to Indeck 10. Ammonia Injection Grid 21. Integral Deaerator
for efficient steam solutions. 11. SCR Catalyst 22. Feedwater Heater


Indeck’s HRSG engineering expertise
will provide design features to maximize
availability.

INDECK-KEYSTONE.com
2 3
Cycling Design and Rapid Startup Features . . .
• Oversized drains to quickly • Thermal shock resistant
remove condensate from economizer inlet harps
Superheaters and Reheaters • Fully vented and drainable
• Quick acting desuperheater spray economizers
water isolation valves • FAC (Flow Assisted Corrosion)
• Extensive use of alloys to mitigation with alloy materials
minimize thermal stresses • Extended mobility stainless steel
• Seamless superheater tubes bellows on lower casing piping
• Available full penetration welds penetrations
in critical locations • Transient rated primary steam
• No shared economizer headers separation technology
between pressure levels • Sparging systems for hot standby
• Insulated stack dampers with
rain gutter

I-HRSG Designed for Superior Performance Modular Box Field Modular


and Advanced Operations
Complete Module Pressure Part Module
• Modularized components for • Experienced CFD exhaust gas
reduced field man-hours path modeling
• Proven design for turbine • Heating surface baffle system
discharge ducts prevents flue gas bypassing
• Full fillet welded liner support • Multi-point natural circulation
stud system system modeling

I-HRSG Maintenance and Inspection


Features
• Rooftop access doors
• Bore scope ports in steam headers and piping
• Sky climber anchor ports in access lanes C Section Platen
• Limited tube bank depths Partial Module Sub-Assembly

INDECK-KEYSTONE.com
4 5
Indeck is uniquely qualified as a designer
and producer of steam generating systems
for 175 years. Indeck has gained considerable
experience in the design and manufacturing of
a broad range of waste heat recovery boilers. Three Drum Open Bottom Fluid Catalytic Cracker Waste Heat Module
High Particulate Waste
Heat Module
Large Process Waste Heat Recovery Boiler

Membrane Waterwall Furnace for


High Firing
Incline HRSG Behind Small CT

Fluid Catalytic Cracker (FCC) Waste Heat Recovery Modules

Indeck extended surface and bare tube surface


designs for other non-gas turbine waste heat
applications are ideal for clean to dust laden/dirty
gas streams. Fin density and tube/fin material varies
with exhaust gas temperature, particulate loading
and corrosion potential.
Modular Box Shop Assembly Field Modular Shipment Packaged Waste Heat Boiler

INDECK-KEYSTONE.com
6 7
Because of such
broad experience,
comprehensive
expertise and
specialized resources,
• Indeck’s industry leading engineering and service can Comprehensive Repair and Indeck is uniquely
improve your HRSG performance and reliability. Upgrade Capability for: qualified to provide
any or all components
• Heat Recovery Steam for your boiler or
• Indeck is able to redesign and supply new heat recovery
Generators HRSGs.
modules and tubes for all HRSG OEM designs.
• 2-Drum Boilers
• Keystone Package Steam
• Indeck has the capability to understand and solve the
Generators
challenges faced by combined-cycle plant operators
• VL Boilers Indeck’s heritage of 175 years include many leading
throughout the world.
• Travagrate Stokers/Solid Fuels industry boiler brands. Indeck is the Exclusive Supplier
• Experts in Boiler Start-up, of O.E.M. Boiler Parts and Services for:
Repair and Upgrades
• Economizers, Airheaters and • Erie City Iron Works • Volcano
Preheaters • Zurn Energy Division • International LaMont
• Superheater and Economizer • Aalborg Industries, Inc. • Starfire
Elements (Industrial Land Based Boilers) • International Boiler Works
• Steam Drum Internals and • Indeck Boiler • Thermoflo
Steam Purifiers
• Burners, Fuel Feeders and
Boiler Tubes
• Highly Knowledgeable Field
Service
• Consultants and Construction
Supervisors
• Unit Inspections
• Custom Training Programs,
Outage Planning, Project
Management
• Condition Assessments
HRSG fully assembled modular box replacement
• Maintenance Support
• On-Site Testing and
Re-Commissioning
• Construction and Installation
Services

INDECK-KEYSTONE.com
8 9
The Indeck Group of Companies
designs and manufactures a complete
Indeck Boiler Corporation has been manufacturing boilers for over 90 years.
line of industrial boiler systems
Indeck Boiler Corporation has history dating back to the 1920’s as Volcano. Indeck
including package boilers, HRSGs,
also has the International Boiler Works designs through our Volcano acquisition.
waste heat boilers, dirty gas boilers,
Indeck Boiler Corporation has long been known as a source of high-quality
solid fuel boilers and hot water
manufacturing of boilers.
generators. Indeck has supplied over
5,000 package boilers, HRSGs and Indeck Keystone Energy has
solid fuel boilers in over 45 countries. over 175 years of steam generating Indeck Energy is a privately held
Typical waste gas sources include: gas experience, a history dating back developer, owner and operator
turbines, process gas, kilns, chemical to the 1840’s as Erie City Iron Works, of power generation projects. For
process, refinery process, etc. Large Zurn Energy Division, and Aalborg Industries. Indeck Keystone more than 25 years, Indeck Energy
capacity designs of up to 1,000,000 Energy has engineering, graphics and project management has demonstrated the imagination,
pounds per hour of steam are available. skills which are recognized as leaders in our industry. know-how and determination
it takes to succeed in this ever-
changing industry. We’re dedicated
Indeck Power Equipment Company has the largest inventory of boilers for sale, lease, or rental
to providing communities with
in North America. Stock sizes range to over 250,000 pounds per hour of steam. A huge selection
reliable power using environmentally
of boiler components is always available for immediate shipment.
sound approaches.

The Indeck Group of Companies is the home to many of the most trusted boiler designs ever built.
You can find the top industry trade names of Volcano, Erie City Iron Works, Zurn, Aalborg Land
Based Boilers, and International Boiler Works all under one roof. Manufactured styles include HRSGs,
packaged waste heat boilers, Package Boilers (A, O, D, Modular), Lamont High Temperature Hot
Water, Solid Fuel. Indeck has the experience to provide a high-quality steam generation system
in a timely manner.

INDECK-KEYSTONE.com
10 11
The Indeck Group of Companies

Indeck Keystone Indeck Power Indeck Boiler Indeck Energy


Energy LLC Equipment Co. Corporation Services, Inc.
5340 Fryling Road 1111 Willis Avenue 4300 Beaudry Avenue 600 N. Buffalo Grove Road
Suite 200 Wheeling, IL 60090 St. Hyancinthe, Suite 300
Erie, PA 16510-4672 Quebec J2S 8A5 Buffalo Grove, IL 60089

24-Hour On-Call 24-Hour On-Call


Parts and Service Parts and Service
Support Line Support Line
(800) 322-5995 (800) 446-3325

You might also like