SPECIFICATIONS

Limitorque MX Selection Data

Performance and Dimensions
for MX Series 05 through 150 Electric Actuators
FCD LMENSS2326-00 – 10/07 (Replaces 130-30000)

Experience In Motion
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

Flowserve Limitorque MX Actuators

Flowserve Limitorque MX actuators have been engineered to accommodate today’s wide variety of valve
designs and to meet international standards for valve and actuator interfaces.

MX Series 05 through 150 electric actuators can be used in applications requiring up to 1,700 ft-lb
(2,307 N m) of torque and up to 75,000 lb (333 kN) of thrust.

Standard and extended torque and thrust bases are available for all unit sizes and a side-mounted hand-
wheel option is offered for the MX-10 through 150.

Dimensions for all sizes of MX actuators, base options, and stem nuts are included in this document.
Contact your local Limitorque distributor or Limitorque sales office for further information.

Typical MX-05 Unit

3
2

11
12

10

5
4

9
6

8 7

Item Description
1 Handwheel
2 Declutch Lever
3 Oil Fills
4 Control Cover
5 Control Panel Display
6 Control Knobs
7 Ground Lugs
8 Thrust/Torque Base

2 9 Conduit Entries
10 Terminal Compartment (Installation Kit)
11 Motor
12 Nameplate
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Series Performance Ratings for Units 05 through 150

MX-05 through MX-40 (three-phase: 50 Hz/380, 400, 415, and 440 Volt: 60 Hz/208, 230, 380, 460, 525, 575 Volt)
MX-85 through MX-150 (three-phase: 50 Hz/380*, 400, and 415 Volt: 60 Hz/380, 460, 525, 575 Volt) *380/50 multiply by 0.9
MX-05 MX-10 MX-20 MX-40 MX-85 MX-140 MX-150
Output Speed (RPM) Rated Output Torque
60 Hz 50 Hz ft-lb Nm ft-lb Nm ft-lb Nm ft-lb Nm ft-lb Nm ft-lb Nm ft-lb Nm
18 15 55 75 125 170 225 305 440 597 N/A N/A N/A N/A N/A N/A
26 22 55 75 125 170 225 305 440 597 850 1153 1500 2036 N/A N/A
40 33 55 75 125 170 225 305 440 597 1225 1662 1700 2307 N/A N/A
52 43 55 75 125 170 225 305 440 597 1150 1561 1600 2171 N/A N/A
77 65
48 65 107 145 178 241 345 468 850 1153 1200 1628 N/A N/A
1
100 131 84 1101 39 53 89 121 148 201 286 388 600 814 739 1003 1500 2036
155 1701 127 1431 41 56 89 121 140 190 260 353 450 611 650 882 1150 1561
200 165 34 46 73 99 114 155 210 285 N/A N/A N/A N/A N/A N/A
Note 1: MX-85, MX-140 and MX-150
lb kN lb kN lb kN lb kN lb kN lb kN lb kN
Thrust Ratings (lb/kN) 8000 35 15000 66 25000 111 36000 160 50000 222 75000 333 75000 333
lb kg lb kg lb kg lb kg lb kg lb kg lb kg
Weights (lb/kg) 52 24 65 29 109 49 133 60 250 114 300 136 300 136

Maximum Stem Capacity

Type A Couplings in. mm in. mm in. mm in. mm in. mm in. mm in. mm
Type A1 1.26 32 1.57 40 2.36 60 2.64 67 3.50 88 3.50 88 3.50 88
Type A1E (Extended Nut) 1.26 32 1.57 40 2.36 60 2.64 67 3.50 88 3.50 88 3.50 88
Type B Couplings (Torque Only)2 in. mm in. mm in. mm in. mm in. mm in. mm in. mm
Type B4 1 25.4 1.25 30 1.94 50 2.2 55 2.88 73 2.88 73 2.625 65
Type B4E (Extended) 0.75 19 0.91 22 1.56 41 1.78 46 2.25 57 2.25 57 2.625 65
Type B1 (Fixed Bore)3 N/A 42 N/A 42 N/A 60 N/A 60 N/A N/A N/A N/A N/A N/A
Type BL (Splined) 6 & 38 Splines 6 & 38 Splines 6 & 36 Splines 6 Splines N/A N/A N/A N/A N/A N/A
Maximum Bore and Keyway in. mm in. mm in. mm in. mm in. mm in. mm in. mm
Maximum Bore (B4) 1 25 1.25 30 1.94 50 2.2 55 2.88 73 2.88 73 2.625 65
Maximum Keyway ¼ sq. 8x7 ¼ sq. 10 x 8 ½ x 3⁄8 14 x 9 ½ x 3⁄8 16 x 10 ¾x½ 20 x 12 ¾x½ 20 x 12 5
⁄8 x 7⁄16 18 x 11
Maximum Bore (B4E) .75 18 0.91 22 1.56 41 1.78 46 2.25 56 2.25 56 2.5 65
Maximum Keyway ⁄16 sq.
3 6x6 ¼ sq. 8x7 3
⁄8 sq. 12 x 8 ½ x 3⁄8 14 x 9 ½ x 3⁄8 16 x 10 ½ x 3⁄8 16 x 10 0.625 sq. 18 x 11
Note 2: Maximum bores for Type B couplings may require rectangular keys.
Note 3: Available in ISO base only.

MX-05 MX-10 MX-20 MX-40 MX-85 MX-140 MX-150

Mounting Base (MSS SP-102/ISO 5210) FA10/F10 FA10/F10 FA14/F14 FA14/F14 FA16/F16 FA25/F25 FA25/F25
Handwheel Ratio (STD/Optional) Direct Direct/8:1 Direct/12:1 Direct/24:1 16/48 16/48 16/48
Side-Mounted Handwheel Efficiencies N/A 52% 54% 51% 53%/51%4 53%/51%4 53%/51%4
Note 4: Efficiencies for MX-85 and 140 are 51% with SGA and 53% without SGA.

MX Handwheel Rimpull
Handwheel Rated Rimpull Output Torque Output Torque Output Torque Output Torque
Unit/ Mounting Diameter Gear Ratio Torque Efficiency at Rated Torque (ft-lb) at 20 lb (ft-lb) at 40 lb (ft-lb) at 60 lb (ft-lb) at 80 lb
(in.) (ft-lb) (lb) Rimpull Rimpull Rimpull Rimpull
MX-05 Top 12 1 55 0.88 125 9 18 26 35
MX-05 Top 18 1 55 0.88 83 13 26 40 53
MX-10 Top 18 1 125 0.88 189 13 26 40 53
MX-10 Side 12 8 125 0.52 60 42 83 125 166
MX-20 Top 24 1 225 0.88 256 18 35 53 70
3
MX-20 Side 12 12 225 0.54 69 65 130 194 259
MX-40 Top 24 1 440 0.88 500 18 35 53 70
MX-40 Side 12 24 440 0.51 72 122 245 367 490
MX-85/140/150 w/o SGA 18 16 600 0.53 88 127 254 382 508
MX-85/140/150 w/ SGA 18 48 1574 0.51 86 367 734 1101 1469

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 05 Dimension Data

Dimensions in inches and millimeters.

Top View View A

LUBRICANT
FILL
PREFERRED MOUNTING
View A
"B"
IS WITH MOTOR
HORIZONTAL LEVER RETURNS
DECLUTCH LEVER AUTOMATICALLY
IS PADLOCKABLE TO THIS POSITION
IN MOTOR WHEN RELEASED. HOLE 0.28" [7] DIA.
OPERATION. FOR PADLOCK
MOTOR
1.4
[37] TO ENGAGE
DRV.SLV. 38°
C A MANUAL
OVERRIDE
C
4.4 7.5
MOTOR [113] [190]

4.1 40°
[105]

CONTROL
PANEL LUBRICANT
SERIAL TEXT
PLATE DRAIN
CONTROLS
TERMINAL COMPARTMENT DETAIL OF DECLUTCH LEVER
COMPARTMENT 2.6
[65]
2.3
[58]

"A"
View B

Side View Front View

STEM COVER (WHEN REQUIRED)
- LENGTH TO SUIT VALVE
A
TRAVEL. THREADED 1¼" NPT
8.7 OR FITTED WITH PIPE PLUG.
5.0 9.1 13.9 5.5
[222]
[127] [232] [354.3] [140]
MAX
* STANDARD HANDWHEEL
* 12" DIA. [305]
DISPLAY
4.0
WINDOW OPTIONAL SIZE AVAILABLE
[102] 18" [450] DIA.
3
1.5
[38]
11.4 MAX *
[289]

7.5
A [190]
DO NOT OPEN
WHILE ENERGIZED

A
6.5 Limitorque
[166] 7.5
[190]

2 1
HOLE 0.22" [5.5] DIA.
X 0.43" [11] DEEP
FOR SELF-TAPPING SCREW

View B

3
CONDUIT ENTRIES
GROUND/EARTHING LUG
POSITION 1 2 3 RECOMMENDED CLEARANCE
* FOR COVER REMOVAL
STANDARD 1¼" NPT 1½" NPT 1¼" NPT
MOUNTING FACE FOR ATTACHING
M32, M25 M40, M32, M32, M25 TO VALVE FLANGE CUSTOMER
OPTIONS M20 M25, M20 M20 TERMINALS

PG21 PG29, PG21 2 1

PG21
DETAIL OF CONDUIT ENTRIES

4
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 05 Base Details

Dimensions in inches and millimeters.

Non-thrust (Torque Only) Bases

Type B1 Type B4 Type B4E (Extended Reach)



















.BY 




.BY


Stem Nut Bore Details

Type B1 (Fixed Bore and Key) Type B4 (Variable Bore) Type B4E (Variable Bore)











.BY .BY

Thrust Bases Base Details

Type A1 Type A1E (Extended Reach) F10



IPMFT
.
Y

PO
B



1$%



EFFQ
 

 












o
9

1JMPU
EJB




 
.BY 
.BY


 




.BY
TUFN .BY
EJBNFUFS TUFN 
EJBNFUFS 

Splined Stem Nuts

Type BL Type BL6 (6 Splines) Type BL38 (38 Splines) FA10



IPMFT
 
6/$
PO
B



 
1$%



EFFQ
 

 

 








o
9

 

 
1JMPU
EJB


.BY


 

 




5
/PUF

.PVOUJOH
GBDF
GPS
BUUBDIJOH
UP
WBMWF
nBOHF
/PUF

.JMMJNFUFS
EJNFOTJPOT
BSF
JO
QBSFOUIFTFT

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 10 Dimension Data

Dimensions in inches and millimeters.

LUBRICANT
Top View "B" FILL View B

DECLUTCH LEVER LEVER RETURNS

IS PADLOCKABLE AUTOMATICALLY
STANDARD HANDWHEEL TO THIS POSITION
IN MOTOR
18" DIA. [450] WHEN RELEASED
OPERATION TO ENGAGE
MANUAL
HOLE 0.28" [7] DIA. OVERRIDE
1.8 MOTOR
[46] FOR PADLOCK
A
38.0°
MOTOR
C 4.9
[125]
4.6
40.0° [117]
CONTROL
PREFERRED MOUNTING PANEL
IS WITH MOTOR
HORIZONTAL SERIAL TEXT CONTROLS HANDWHEEL
PLATE COMPARTMENT REMOVED LUBRICANT DRAIN
2.4 FOR CLARITY
2.6 [60]
[65] DETAIL OF DECLUTCH LEVER
TERMINAL
4.0 COMPARTMENT
[101]
"A"

Side View Front View STEM COVER (WHEN REQUIRED)

LUBRICANT - LENGTH TO SUIT VALVE
FILL TRAVEL. THREADED 2" NPT
OR FITTED WITH PIPE PLUG.
1.5 9.2
"B"
DECLUTCH LEVER [38] [233]
*
IS PADLOCKABLE DISPLAY
IN MOTOR STANDARD HANDWHEEL WINDOW
OPERATION 12" DIA. [305]

1.8 CONTROL
MOTOR
[46] PANEL
A
7.5
MOTOR [190]
C 4.9
[125] A

PREFERRED
MOUNTING IS WITH SERIAL TEXT 0.88
MOTOR HORIZONTAL PLATE CONTROLS [22.2]
COMPARTMENT
2.4
2.6 [60]
[65] TERMINAL
COMPARTMENT
4.0
[101]
"A"

Side-mounted Option: Side View Side-mounted Option: Front View

STEM COVER (WHEN REQUIRED)
- LENGTH TO SUIT VALVE
TRAVEL. THREADED 2" NPT
DISPLAY OR FITTED WITH PIPE PLUG.
WINDOW
5.0 11.7 14.4 5.5
[127] [298] [366.5] [140] 1.5 9.2 5.43 4.0
[38] * [233] [138] [101]
*
3

7.5
A [190] 7.5
6.8
[173] [190] B
Limitorque 8.5 6.4
[216] A
[163]
3.1
[78]

2 1
.88
[22.2]

HOLE 0.22" [5.5] DIA.

X 0.43" [11] DEEP
FOR SELF-TAPPING
SCREW
View A

CONDUIT ENTRIES 3
POSITION 1 2 3

6 STANDARD 1¼" NPT 1½" NPT 1¼" NPT

*
GROUND/EARTHING LUG
RECOMMENDED CLEARANCE
M32, M25 M40, M32, M32, M25 FOR COVER REMOVAL
OPTIONS M20 M25, M20 M20 CUSTOMER
MOUNTING FACE FOR ATTACHING TERMINALS
PG21 PG29, PG21 TO VALVE FLANGE
PG21 2 1

DETAIL OF CONDUIT ENTRIES

 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 10 Base Details

Dimensions in inches and millimeters.

Non-thrust (Torque Only) Bases

Type B1 Type B4 Type B4E (Extended Reach)

Stem Nut Bore Details

Type B1 (Fixed Bore and Key) Type B4 (Variable Bore) Type B4E (Variable Bore)

Thrust Bases Base Details

Type A1 Type A1E (Extended Reach) F10

Splined Stem Nuts

Type BL Type BL6 (6 Splines) Type BL38 (38 Splines) FA10

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 20 Dimension Data

Dimensions in inches and millimeters.

Top View View B

LUBRICANT STANDARD HANDWHEEL
FILL 24" [610] DIA. LEVER RETURNS
AUTOMATICALLY
DECLUTCH LEVER "B" TO THIS POSITION
IS PADLOCKABLE WHEN RELEASED
IN MOTOR LUBRICANT
OPERATION FILL
TO ENGAGE
HOLE 0.28" [7] DIA. MANUAL
FOR PADLOCK OVERRIDE
MOTOR

A 33.5°
2.2 7.5
[57] MOTOR [189]
C
6.4
[163]
HANDWHEEL
5.6
REMOVED 40.0°
[141]
FOR CLARITY
PREFERRED MOUNTING CONTROL
IS WITH MOTOR PANEL
HORIZONTAL
CONTROLS
SERIAL TEXT COMPARTMENT LUBRICANT DRAIN
PLATE
2.6
[65] DETAIL OF DECLUTCH LEVER
TERMINAL (HANDWHEEL REMOVED FOR CLARITY)
3.9 2.1
COMPARTMENT
[100] [54]

"A"

Side View Front View

5.0 13.5 15.1 STEM COVER (WHEN REQUIRED)
[127] [344] [384.2] - LENGTH TO SUIT VALVE
TRAVEL. THREADED 3" NPT
* OR FITTED WITH PIPE PLUG.
4.0 DISPLAY
[102] WINDOW
1.5 10.7
3
[38] [272]
*
5.5
[140] 14.4
[366]

DO NOT OPEN 7.5

WHILE ENERGIZED A
[190]
7.6
[194] Limitorque
7.5
[190] A
3.9
[100]

2 1

HOLE 0.22" [5.5] DIA. 1.5 3.5

X 0.43" [11] DEEP [38] [90]
FOR SELF-TAPPING
SCREW

Side-mounted Option: Side View Side-mounted Option: Front View

5.0 13.5 15.1 5.5 STEM COVER (WHEN REQUIRED)
[127] [344] [384.2] [140] - LENGTH TO SUIT VALVE
POSITION TRAVEL. THREADED 3" NPT
* INDICATOR OR FITTED WITH PIPE PLUG.
*
1.5 10.7 6.6 4.0
[38] [272] [168] [101]
*
3

7.5
B
[190]
7.6
Limitorque C 7.5
[194]
11.9 [190]
3.9 [302] 8.5
B
[100] [215]

1
2

HOLE 0.22" [5.5] DIA. 3.5

.80
X 0.43" [11] DEEP [90]
[20.3]
FOR SELF-TAPPING
SCREW

View A
CONDUIT ENTRIES
3
8 POSITION 1 2 3 GROUND/EARTHING LUG
STANDARD 1¼" NPT 1½" NPT 1¼" NPT * RECOMMENDED CLEARANCE
FOR COVER REMOVAL
M32, M25 M40, M32, M32, M25
OPTIONS M20 M25, M20 M20 MOUNTING FACE FOR ATTACHING
CUSTOMER TO VALVE FLANGE
TERMINALS PG21 PG29, PG21
PG21
2 1

DETAIL OF CONDUIT ENTRIES

 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 20 Base Details

Dimensions in inches and millimeters.

Non-thrust (Torque Only) Bases

Type B1 Type B4 Type B4E (Extended Reach)
.098
(2.50)

(78)
3.1
(74)
2.9

(62)
2.4
3.2
.098
(85)
3.3

(81)
(2.50)
.108 1.8
(2.75) (45)

Stem Nut Bore Details

Type B1 (Fixed Bore and Key) Type B4 (Variable Bore) Type B4E (Variable Bore)
2.533 (64.35)
2.545 (64.65)
Ø 2.38
(60.0)

.713
(18.13)

Ø 1.9375 Max. Ø 1.62 Max.

(49.213) (41.15)

Thrust Bases Base Details

Type A1 Type A1E (Extended Reach) F14

3.933 (99.91) Ø 7.0
3.935 (99.96) (175)

45.0
Pilot dia.
(101)
4.0

(101)
4.0
(99)
3.9

.108
(51)
2.0

(2.75)

2.36 .108
(60.0) 2.36
(60.0) (2.75)
Max. stem 4 holes M16-2 x 32 mm deep.
diameter Max. stem
diameter Equispaced as shown
on a 140.0 mm PCD,
1.10" (28) deep
Splined Stem Nuts

Type BL Type BL6 (6 Splines) Type 36T FA14

1.275 (32.38) t
*OWPMVUF
QFS
"/4*
# 3.746 (95.16) Ø 7.0

1.278 (32.48) t
'JMMFU
SPPU 3.748 (95.21) (175)
t
4JEF
mU
(114)
4.5
(111)
4.4

t
¡
1A 45.0
t

QJUDI
Pilot dia.

1.511 (38.38)
0.098
(2.50) 1.517 (38.54)

0.373 (9.47)
0.377 (9.57) 9
4 holes 5/8 -11 UNC.
Equispaced as shown
Note 1: Mounting face for attaching to valve flange. on a 5.50" (140) PCD,
1.10" (28) deep
Note 2: Millimeter dimensions are in parentheses.

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 40 Dimension Data

Dimensions in inches and millimeters.

Top View "B" View B LEVER RETURNS

AUTOMATICALLY
TO THIS POSITION
LUBRICANT FILL STANDARD HANDWHEEL WHEN RELEASED
24"[610] DIA.
HOLE 0.28" [7] DIA.
FOR PADLOCK
DECLUTCH LEVER
IS PADLOCKABLE LUBRICANT FILL
IN MOTOR TO ENGAGE
OPERATION MANUAL
CONTROL OVERRIDE
PANEL

MOTOR 33.5°
A
7.5
2.7 [189]
[68] MOTOR 6.9 5.9
C [174] 40.0° [150]

PREFERRED MOUNTING DETAIL OF DECLUTCH LEVER

IS WITH MOTOR
HORIZONTAL CONTROLS
SERIAL TEXT COMPARTMENT
PLATE

2.6 2.1
[65] [54] TERMINAL
4.0 COMPARTMENT
[102]
"A"
Side View Front View

HOLE 0.22" [5.5] DIA. STEM COVER (WHEN REQUIRED)

X 0.43" [11] DEEP - LENGTH TO SUIT VALVE
FOR SELF-TAPPING TRAVEL. THREADED 3" NPT
SCREW DISPLAY OR FITTED WITH PIPE PLUG.
11.1
WINDOW [283]
5.0 13.8 15.4
[127] [350] [392.3]
1.6
* [41] *
3.9
[98]

3 5.5
[140] 15.0
[381]
*

7.5 A
[190]
A 7.5
[190]
7.8
[198]
4.1
[105]
1.7
[42] 3.5
2 1 [88]

Side-mounted Option: Side View Side-mounted Option: Front View

DISPLAY
2.2 13.8 15.4 5.5 WINDOW
[56] [350] [392.3] [140]
11.1
[283]
HOLE 0.22" [5.5] DIA.
X 0.43" [11] DEEP
FOR SELF-TAPPING
SCREW
3
CL
11.9
[302]

B 10.6
B 7.5 A
[268]
7.5 [190]
7.8 [190]
[198]
4.1
[105]

TAPPED
2 M5 X 0.31 (8) 1.7 3.5
1 DEEP [42] [89]

View A
3
CONDUIT ENTRIES
10 POSITION 1 2 3
GROUND/EARTHING LUG
STANDARD 1¼" NPT 1½" NPT 1¼" NPT OIL FILLER/DRAIN PLUG
CUSTOMER M32 M40 M32
TERMINALS OPTIONS M32 # ALLOWANCE FOR COVER REMOVAL

2 1 PG21 PG29 PG21 ## MOUNTING FACE FOR ATTACHING

PG21 TO VALVE FLANGE

DETAIL OF CONDUIT ENTRIES

 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 40 Bases
Dimensions in inches and millimeters.

Non-thrust (Torque Only) Bases

Type B1 Type B4 Type B4E (Extended Reach)
.098 Max.
(2.50)

(85)
3.3

(89)
3.5

(70)
2.8
(102)
4.0
(99)
3.9

.098 Max. 2.3

(2.50) (58)
.108 Max.
(2.75)

Stem Nut Bore Details

Type B1 (Fixed Bore and Key) Type B4 (Variable Bore) Type B4E (Variable Bore)

2.533 (64.35)
2.545 (64.65)
Ø 2.38
(60.0)

0.709 (18.03)
0.718 (18.13)
2.226 1.82
(55.6) (46.2)
Max. Max.

Thrust Bases Base Details

Type A1 Type A1E (Extended Reach) F14

3.933 (99.91) Ø 7.0
3.935 (99.96) (175)

45.0
Pilot dia.
(101)
4.0

(101)
4.0
(99)
3.9

.108 .108
(61)
2.4

(2.75) (2.75)
2.64
(67.0) 2.64
Max. stem (67.0)
Max. stem 4 holes M16-2 x 32 mm deep.
diameter Equispaced as shown
diameter on a 140.0 mm PCD,
1.10" (28) deep

Splined Stem Nuts

Type BL Type BL6 (6 Splines) FA14

1.275 (32.38) 3.746 (95.16) Ø 7.0

1.278 (32.48) 3.748 (95.21) (175)
(114)
4.5
(111)
4.4

45.0
Pilot dia.
0.098
(2.50)

1.511 (38.38)
1.517 (38.54)

0.373 (9.47) 11
4 holes 5/8 -11 UNC tap
0.377 (9.57) x 1.10 deep.
Equispaced as shown
Note 1: Mounting face for attaching to valve flange. on a 5.50" (140) PCD,
1.10" (28) deep
Note 2: Millimeter dimensions are in parentheses.

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 85 Dimension Data

Dimensions in inches and millimeters.

Top View View B

A
4.8
[122.5]
LUBRICANT
"B" FILL

STANDARD HANDWHEEL
18" DIA. [457]

LEVER RETURNS
AUTOMATICALLY
DECLUTCH LEVER TO THIS POSITION
IS PADLOCKABLE WHEN RELEASED
IN MOTOR
OPERATION HOLE 0.28" [7] DIA.
FOR PADLOCK
CONTROL TO ENGAGE
PANEL MANUAL
HANDWHEEL OVERRIDE
MOTOR REMOVED
FOR CLARITY 71.5°

4.3
[110] 9.2
MOTOR [233]
C

PREFERRED MOUNTING 31.0°

IS WITH MOTOR 7.1
HORIZONTAL [181]
CONTROLS
SERIAL TEXT
COMPARTMENT
PLATE

.3 TERMINAL LUBRICANT DRAIN

[8] COMPARTMENT
DETAIL OF DECLUTCH LEVER
1.3 "A"
[32]

4.7
[119]

Side View Front View STEM COVER (WHEN REQUIRED)

- LENGTH TO SUIT VALVE
TRAVEL. THREADED 6" NPT
OR FITTED WITH PIPE PLUG.

5.0 19.6 17.0 5.5 1.5 13.4 13.7 4.0

[127] [499] [431] [140] [38] * [341] [348] [101]
*

DISCONNECTS MUST
BE USER INSTALLED.
DRAWING FOR
REFERNCE ONLY.

3
16.2
16.8
[413]
[426]

7.5 7.5
[190] [190]

9.2
[235] 6.5
[165] DISPLAY
3.3 WINDOW
[84]

1
2

HOLE 0.22" [5.5] DIA.

X 0.43" [11] DEEP
FOR SELF-TAPPING
SCREW

View A

CONDUIT ENTRIES
POSITION 1 2 3

CUSTOMER STANDARD 1¼" NPT 1½" NPT 1¼" NPT GROUND/EARTHING LUG
TERMINALS
M32, M25 M40, M32, M32, M25 * RECOMMENDED CLEARANCE
2 1 M20 M25, M20 M20
OPTIONS FOR COVER REMOVAL

PG21 PG29, PG21 MOUNTING FACE FOR ATTACHING

PG21 TO VALVE FLANGE
DETAIL OF CONDUIT ENTRIES

12
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 85 Bases
Dimensions in inches and millimeters.

Thrust Bases Stem Nut Bore Details

Type A1 Type A1E (Extended Reach) Type B4 (Variable Bore)






















 .BY
.BY
CPSF 

.BY
CPSF 


%JBNFUFS

Thrust Bases

Type B4 Type B4E (Extended Reach) Type B4E (Variable Bore)


















 



.BY



%JBNFUFS

Base Details

F16 FA16


 
 


 
 

 
1JMPU
EJB 1JMPU
EJB


IPMFT
.
Y

Y

NN
EFFQ
&RVJTQBDFE
BT
TIPXO
PO


IPMFT
 
UBQ
Y

EFFQ



#$
TUSBEEMF &RVJTQBDFE
BT
TIPXO
PO


DFOUFSMJOF 

#$
TUSBEEMF
DFOUFSMJOF

Base Details

F25 FA25
 

  




 
 

1JMPU
EJB
1JMPU
EJB
 


IPMFT
.
Y

Y

NN
13

IPMFT
 
UBQ
Y

EFFQ
EFFQ
&RVJTQBDFE
BT
TIPXO &RVJTQBDFE
BT
TIPXO
PO
PO



#$
TUSBEEMF



#$
TUSBEEMF /PUF

.PVOUJOH
GBDF
GPS
BUUBDIJOH
UP
WBMWF
nBOHF
DFOUFSMJOF DFOUFSMJOF /PUF

.JMMJNFUFS
EJNFOTJPOT
BSF
JO
QBSFOUIFTFT

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 140 Dimension Data

Dimensions in inches and millimeters.

Top View View B

4.8
[122.5] A

"B"
LUBRICANT
FILL
STANDARD HANDWHEEL LEVER RETURNS
18" DIA. [457] AUTOMATICALLY
TO THIS POSITION
DECLUTCH LEVER WHEN RELEASED
IS PADLOCKABLE
IN MOTOR
OPERATION HOLE 0.28" [7] DIA.
FOR PADLOCK
CONTROL TO ENGAGE
PANEL MANUAL
MOTOR HANDWHEEL OVERRIDE
REMOVED
FOR CLARITY 71.5∞

4.3
[110] 9.2
MOTOR [233]
C

31.0∞
7.1
PREFERRED MOUNTING [181]
CONTROLS
IS WITH MOTOR COMPARTMENT
HORIZONTAL SERIAL TEXT
PLATE

TERMINAL LUBRICANT DRAIN

.3 COMPARTMENT
[8] DETAIL OF DECLUTCH LEVER
1.3
[32] "A"
4.7
[119]

Side View Front View

STEM COVER (WHEN REQUIRED)
- LENGTH TO SUIT VALVE
TRAVEL. THREADED 6" NPT
OR FITTED WITH PIPE PLUG.
1.5 13.4 10.8 4.0
24.7 17.0 5.5 [38] [341] [275] [101]
5.0
[627] [431] [140] *
*

3
16.8
[426]

7.5 7.5
[190] 13.2 [190]
[336]
9.2
[235] 6.5
[165] DISPLAY
3.3 WINDOW
[84]

1
2

HOLE 0.22" [5.5] DIA.

X 0.43" [11] DEEP
FOR SELF-TAPPING
SCREW

View A

CONDUIT ENTRIES
POSITION 1 2 3

CUSTOMER STANDARD 1¼" NPT 1½" NPT 1¼" NPT GROUND/EARTHING LUG
TERMINALS
M32, M25 M40, M32, M32, M25 * RECOMMENDED CLEARANCE
2 1 M20 M25, M20 M20
OPTIONS FOR COVER REMOVAL

PG21 PG29, PG21 MOUNTING FACE FOR ATTACHING

PG21 TO VALVE FLANGE
DETAIL OF CONDUIT ENTRIES

14
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 140 Bases

Dimensions in inches and millimeters.

Thrust Bases Stem Nut Bore Details

Type A1 Type A1E (Extended Reach) Type B4 (Variable Bore)

(125)
4.9
(125)
4.9

.18
(4.50)
2.625

(59)
2.3
.17 (65)
(4.50) Max.
5.0
(127)
Diameter

Thrust Bases

Type B4 Type B4E (Extended Reach) Type B4E (Variable Bore)

3.65
(92.8)
(117)
4.6
(112)
4.4

.20
(5.0)
(112)
4.4

1.625
(85)
3.3

(42)
Max.
.20
(5.0)

3.1
(79)
Diameter

Base Details

F25 FA25

7.866 (199.80) Ø 11.8 5.996 (152.30) Ø 11.8

7.872 (199.95) 5.998 (152.36)

Pilot dia.
Pilot dia.
22.5 22.5

8 holes M 16 x 32 mm deep. 8 holes 5/8 -11 tap x 1.26 deep.

Equispaced as shown on Equispaced as shown on 10.00 (254.0)
10.00 (254.0) B.C. B.C. straddle centerline

Note 1: Mounting face for attaching to valve flange.

Note 2: Millimeter dimensions are in parentheses.

15

flowserve.com
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 150 Dimension Data

Dimensions in inches and millimeters.

Top View View B

4.8

[122.5]
"B"
LUBRICANT
FILL LEVER RETURNS
DECLUTCH LEVER AUTOMATICALLY
IS PADLOCKABLE STANDARD HANDWHEEL TO THIS POSITION
IN MOTOR 18" DIA. [457] WHEN RELEASED
OPERATION

HOLE 0.28" [7] DIA.

FOR PADLOCK TO ENGAGE
MANUAL
OVERRIDE
MOTOR CONTROL HANDWHEEL
PANEL REMOVED 71.5°
FOR CLARITY

4.3
9.2
[110]
MOTOR [233]

7.1
31.0°
[181]
CONTROLS
COMPARTMENT
PREFERRED MOUNTING
IS WITH MOTOR SERIAL TEXT
HORIZONTAL PLATE
.3
[8] DETAIL OF DECLUTCH LEVER
TERMINAL
1.3 COMPARTMENT
[32] "A"
4.7
[119]

Side View Front View STEM COVER (WHEN REQUIRED)

LENGTH TO SUIT VALVE
TRAVEL. THREADED 6" NPT
OR FITTED WITH PIPE PLUG.

6.5 24.5 17.0 5.5 1.5 13.4 10.8 4.0

[198] [622] [431] [140] [38] [341] [275] [101]

16.8
[426]

7.5
7.5
[190] 13.2 [190]
9.2
[235] [336]
6.5
[165] 3.3
[84] DISPLAY
WINDOW
1
2
HOLE 0.22" [5.5] DIA.
X 0.43" [11] DEEP
FOR SELF-TAPPING
SCREW

View A

CONDUIT ENTRIES
POSITION 1 2 3

CUSTOMER STANDARD 1 ¼" NPT 1 ½" NPT 1 ¼" NPT

TERMINALS GROUND/EARTHING LUG
M32, M25 M40, M32, M32, M25
2 1 M20 M25, M20 M20 RECOMMENDED CLEARANCE
OPTIONS FOR COVER REMOVAL

DETAIL OF CONDUIT ENTRIES PG21 PG29, PG21 MOUNTING FACE FOR ATTACHING
PG21 TO VALVE FLANGE

16
 Limitorque MX Performance and Dimensions FCD LMENSS2326-00 – 10/07

MX Unit 150 Bases

Dimensions in inches and millimeters.

Thrust Bases Stem Nut Bore Details

Type A1 Type A1E (Extended Reach) Type B4 (Variable Bore)

(125)
4.9
(125)
4.9

.18
(4.50)
2.625

(59)
2.3
.17 (65)
(4.50) Max.
5.0
(127)
Diameter

Thrust Bases

Type B4 Type B4E (Extended Reach) Type B4E (Variable Bore)

3.65
(92.8)
(117)
4.6
(112)
4.4

.20
(5.0)
(112)
4.4

1.625
(85)
3.3

(42)
Max.
.20
(5.0)

3.1
(79)
Diameter

Base Details

F25 FA25

7.866 (199.80) Ø 11.8 5.996 (152.30) Ø 11.8

7.872 (199.95) 5.998 (152.36)

Pilot dia.
Pilot dia.
22.5 22.5

8 holes M 16 x 32 mm deep. 8 holes 5/8 -11 tap x 1.26 deep.

Equispaced as shown on Equispaced as shown on 10.00 (254.0)
10.00 (254.0) B.C. B.C. straddle centerline

Note 1: Mounting face for attaching to valve flange.

Note 2: Millimeter dimensions are in parentheses.

17

flowserve.com
 Flowserve Corporation
Flow Control

United States
Flowserve Limitorque
5114 Woodall Road,
P.O. Box 11318
Lynchburg, VA 24506-1318
Phone: 434-528-4400
Facsimile: 434-845-9736

England
Flowserve Limitorque
Euro House
Abex Road
Newbury
Berkshire, RG14 5EY
United Kingdom
Phone: 44-1-635-46999
Facsimile: 44-1-635-36034

Japan
Limitorque – Nippon Gear Co., Ltd.
Asahi-Seimei Bldg. 4th Floor
1-11-11 Kita-Saiwai, Nishi-Ku
Yokohama-Shi, (220-0004)
Japan
Phone: 81-45-326-2065
Facsimile: 81-45-320-5962
To find your local Flowserve representative,
visit www.flowserve.com or call USA 1 800 225 6989 Canada
Flowserve Limitorque
120 Vinyl Court
Woodbridge, Ontario L4L 4A3
Canada
Phone 905-856-4565
Fax 905-856-7905

Singapore
Limitorque Asia, Pte., Ltd.
12, Tuas Avenue 20
FCD LMENSS2326-00 Printed in USA. (Replaces 130-30000) Singapore 638824
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended Phone: 65-6868-4628
function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a
wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications.
Facsimile: 65-6862-4940
The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/
user should read and understand the Installation Operation Maintenance (IOM) instructions included with the product, and train its employees and contractors in the safe use of Flowserve
products in connection with the specific application. China
While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes only and should not be considered certified or as
Limitorque Beijing, Pte., Ltd.
a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any matter with respect to this RM A1/A2
product. Because Flowserve is continually improving and upgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice.
Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices. 22/F, East Area, Hanwei Plaza
No. 7 Guanghua Road, Chaoyang District
© 2008 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Beijing 100004, Peoples Republic of China
The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.
Phone: 86-10-5921-0606
Facsimile: 86-10-6561-2702

India
Flowserve Limitorque
423 Jaina Towers II,
District Centre, Janakpuri
New Delhi-110058
Phone: 91-11-25614486

flowserve.com