Fire Fighting Catalog

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

MYFFC

FIGHTING FIRE WITH TECHNOLOGY

www.myffco.my
FLANGED END SWING CHECK VALVE, UL APPROVED
Techinical Specifications:
Design Standard : AWWA C508
Norminal Perssure : 300PSI
Flnge Standard : ANSI B16.1 Class 125 or according to the
customer’s requirements
Both inside and outside of the body need Epoxy Resin Coating

MODEL: MF-4100-300

OS & Y TYPE FLANGED END


GATE VALVE, UL APPROVED
WATER TYPE BUTTERFLY Techinical Specifications:
Design Standard : AWWA C515
VALVE, UL APPROVED Norminal Perssure : 200PSI
Flnge Standard : ANSI B16.1 Class 125
or according to the customer’s requirements/
Both inside and outside of the body
need Epoxy Resin Coating

MODEL: MF-3100-200/ MF-3100-300

Carried Standard
ANGLE HOSE VALVE, UL APPROVED
Design Standard API609 Specifications:
The angle (90 degree) pattern valve for use
Groove Standard ANSI/AWWA C606 on standpipe having inlet and outlet
Top Standard ISO5211 opening of the same size or with the inlet
larger than outlet. Opening was the
Test Standard FM1112/UL 1091 1.5-2.5inch nominal size. The valve is made
in accordance with UL 688 Hose valve for
MODEL: MF-5100-300
Fire Protection service
MODEL: MF_DF_40

PORTABLE SPRAY NOZZLE CD FIRE, UL LISTED


FIRE HOSE MYFFCO, UL LISTED Specifications:
Model A trade size in 1-1/2” and 2-1/2”, rated for
use at an inlet pressure of 100 psi, the basic
spray type nozzle with a rotational type control,
the nozzle is an adjustable type having a water
spray discharge ranging from a wide cone
shaped pattern through straight stream to
shot-off, the nozzle are made of red leaded
brass material conforming to ASTM B30, alloy
C83600 and utilize EPDM O-ring, the nozzle are
intended for use on class A and B fires only, and
MODEL: SINGLE JACKET the discharge rate at 100psi flowing inlet
pressure in full spray pattwern 1-1/2” nozzle is
Specifications: 130(+/-) 5 gpm; 2-1/2” nozzle is 205 (+/-) 5 gpm.
Model : 17-40, 1-1/2” Single jacketed fire hose for
interior standpipes with TPU lining, hot melting STANDARD RESPONSE PENDENT SPRINKLER,
adhesive and polyester jacket.
Jacket : 100% virgin Polyester jacket, Single Jacket UL Approved Specifications:
Twill or plain weave Minimum Operating Pressure: 7 psi (0.5 bar)+
Lining : Polyurethene (TPU) cube. Maximum Working Pressure: 175 psi (12 bar)
Color : White, Red, Yellow. wwp Factory tested hydrostatically to 500 psi
Package : Roll or folded, packed in carton or loaded in pallet. (34.5 bar) Thread size: 5.6 U.S. (80.6 metric”)
Application : non-percolating uncoated rack hose, also Glass-bulb fluid temperature rated to -65 oF
named as Box hoses, Cabinet Hoses, Rack hoses (-55 oC) Overall Length: 2-1/4” (57mm) +
are placed in cabinet located in residential, cULus Listing, FM Approval, and NFPA 13
industrial building Premium solution. installs require a minimum of 7 psi (0.5 bar)
Hose Standard : Meet or exceed UL219, ULC. The minimum operating pressure for LPCB
Standard Length : 15m (50ft), 20m (66ft), 22m (75ft) 30m (100ft). and CE Approvals ONLY is 5psi (0.35 bar)
2 WAY BREECHING INLET LANDING VALVE 2 WAY WET PILLAR HYDRANT

MODEL: KX08-202-00 MODEL: MF-K65-OLVF

FIRE PEOTECTION THREADED TEST AND


DRAIN VALVE CD FIRE, UL APPROVED STEEL DOORS AND FRAMS
Specifications Description
Working Water Pressure Range 20 to 300 psi(1,4 to 20,7 bar) Steel products are rugged long lasting and great
Physical Characteristics endurance through time. They resist environmental
The Body is Ductile iron ,the hand-hole cover is ductile iron, stress like heat and humidity that adversely impact other
and the seat ring is bronze. The clapper for the 2-1/2 inch door and frame products are easy to maintain and
valve size is stainless steel. The clapper for the larger valve ensure virtually trouble free operation for many years.
size is ductile iron. All valve sizes utilize an EPDM clapper steel door and frame are also an ideal solution to any
facing. Threaded port connections for the alarm valves are degree of security
available NPT threaded or threaded per IOS 7-1 as detailed in
the Ordering Procedure section. Valve with NPT threaded our doors are the most reliable doors manufactured,
ports will readily accept the trim arrangement. using the highest quality materials and manufacturing
techniques. We produce in many sizes, gauges and
design to meet the needs of architects, owners and
contractor

Alarm Check Valve


EN3 CO2 TYPE
FIRE EXTINGUISHER

FIRE PUMPS
Description
Fire Pump is a single stage, non-self-priming. centrifugal volute pump
with redial suction anddischarge port. This pump has a horizontal pump
shaft with the impeller placed in the middle of the shaft and whit self Specifications
contained bearing housing and seal chamber on both side of the impeller, British Standards Institution – BSI
without disturbing the motor or pipe-work, the slit case construction approval. Suitable for Class B &
pump casing to be dismantledin the horizontal plane along the drive Electrical Hazards . High Quality and
shaft. Removal and dismantling of the internal pump partse.g. bearings, good value . Color coded for instant
wear rings, impeller and shaft and shaft seal can take place. recognition. Available in aluminum
and light weight steel. Easy to use and
leave no messy residue. ISO 9001
Certified Quality System by QAS
Australia. EN3 approved Cylinder Test
Pressure: 250 Bar
4WAY BREECHING INLET CABINET
Specifications
Specifications
cations
Dimension : 600mm*400mm*300mm Dimension : 600mm x 400mm x 300mm
Materials : Mild Steel Materials : Mild Steel
Thickness : 0.9mm Thickness : 0.9mm
Glass : Clear Type Glass : Clear Type
Installation : Recess Mounted Installation : Recess Mounted
Paint Finish : Epoxy Powder Red Paint Finish : Epoxy Powder Red
Manufacture : BS 5041 Part 5 Manufacture : BS 5041 Part 5
Code No. : MF-MS-STD-RD Code No. : MF-MS-004-RD
MYFFC
FIGHTING FIRE WITH TECHNOLOGY

Fire Alarm & Detection


MYFFCO (FIGHTING FIRE WITH TECHNOLOGY)
MYFFCO was founded Malaysia on a sample ambition to provide a wide range of products to need for
FIRE PROTECTION & FIRE FIGHTING INSDRUSTRY.
As one-stop service center for customers fulfilling safety and protective needs with Fire Dictions and
Protection solution.

What We Do?
• Fire Protection System- Hydrant and Sprinkle
• Fire Alarm & Detection System
• Gas Suppression System
• Fire Extinguisher & Equipment

Why Chose Us?


• We are Professional & Specialist with strong background
• We have a full Qualified Engineering
• We have Engineering and Consultancy Team
• We have Dedicated Engineering Team for Maintenance
Our Vision!
To be the Leading and Pioneer in Industrial, Commercial & Residential Sector

Our Mission!
To Empower Customer to Secure Life Property and Business by Delivering high innovative fire
Protection solutions and Knowledge.

Contact Person
Abd Bashir Abbas (Managing Director) +6010 8897403, HP: +65 97304025
For More Detail visit our website or Email or Contact us!
MYFFC
FIGHTING FIRE WITH TECHNOLOGY

Head Office:
MYFFCO (M) SDN BHD. (1197503-A)
No: 23 Block D, Subagg Light Industrial Park,
Jalan Subang 2, USJ 47610 Subang Jaya
Selangor, Malaysia.
Email: [email protected]
Web: www.myffco.my
Phone: +60 10889 7403

Johor office:
MYFFCO JV SDN BHD (1345989-M)
No 2 Jalan Budiman KG Melayu 81100
Johor, Bahru, Johor, Malaysia.
Phone: +60 12747 7698
E-mail: [email protected]

Singapore Office:
MYFFCO PTE LTD (2018113N)
No: 1 Claymore Driver #08-03
Orchard Tower Rear BLK. APT.
Singapore 229594
HP: +65 97304025

You might also like