QUOTATION

DATE 2019.10.28 VALIDITY:30 DAYS FROM THIS DATE. NO. 1910071

TO MESSRS SAM PRINTING & PACKAGING LTD. SALES
ADDRESS DHAKA - BANGLADESH Jacky Chang
ATTN EMAIL
TEL [email protected]
FAX WEB SITE
EMAIL www.hci.cc

FP-250 SHRINK SLEEVE SEAMING MACHINE 1 SET

SPECIFICATION
1 MATERIAL WIDTH 110 - 520 MM
2 UNWIND DIA. 500MM (MAX.)
3 MATERIAL THICKNESS 35 - 80 MICRONS
4 UNWIND PAPER CORE I.D. 3"
5 SLEEVE WIDTH 50 - 250 MM (UNDER 50MM ON REQUEST)
6 REWIND DIA. 700MM (MAX.)
7 REWIND PAPER CORE I.D. 3" (6",8",10" AS OPTIONAL)
8 MECHANICAL SPEED 0 - 300 M/MIN.
9 POWER □220V □380V □415V □440V / □OTHERS
HZ/PHASE □50HZ □60HZ / □3-PHASE
10 MACHINE COLOR
□ STANDARD : FRAME & CONTROL BOX : WHITE (PANTONE 7527C)
SAFETY COVER : BRIGHT GREEN
□ ON REQUEST (PLEASE PROVIDE PANTONE NUMBER)
STANDARD ACCESSORIES
1 CANTILEVER / FLOATING UNWIND STAND 1 SET
1-1 3" UNWIND AIR SHAFT 1 PC
1-2 EPC WEB GUIDER EDGE - TAIWAN 1 SET
1-3 POWDER BRAKE 2.5KG/M (UNWIND TENSION) 1 SET
2 SLEEVE FORMING 1 SET
2-1 SLEEVE WIDTH ADJ. DEVICE 1 SET
(WIDTH ABOVE 50MM BY MODULAR ACRYLIC FORMING PLATES)
2-2 MODULAR ACRYLIC FORMING PLATES 1 SET
2-3 DRYER BLOWER 1/4HP (FOR GLUE DRYING) 1 SET
2-4 LAMP FOR ILLUMINATION 1 SET
3 GLUE APPLICATION SYSTEM 1 SET
3-1 PNEUMATIC TYPE STAINLESS STEEL GLUE TANK 1 SET
3-2 DISC TYPE GLUE APPLICATOR (BEFORE FORMING) 1 SET
3-2-1 GLUE FLOW ADJ. DEVICE 1 SET
3-2-2 PNEUMATIC CONTROL APPLICATOR (DISC) & ADJ. MECHANISM 1 SET
3-3 WICK TYPE GLUE APPLICATOR (AFTER FORMING) 1 SET
3-3-1 GLUE FLOW ADJ. DEVICE 1 SET
3-3-2 APPLICATOR (FELT) POSITION MANUAL ADJ. MECHANISM 1 SET
3-4 NEEDLE TYPE GLUE APPLICATION SYSTEM 1 SET
BY PERISTALTIC PUMP (STABLE OPERATION SPEED 80M/MIN & UP, GLUING WIDTH VARY FROM 1.0~2.5MM,

04/12/2020 FP-250 1 /4
 DEPENDING ON OPERATION SPEED AND PUMP RPM)
3-4-1 PERISTALTIC PUMP WITH SINGLE-CHANNEL PUMP HEADS 1 SET
3-4-2 STAINLESS STEEL DISPENSING NEEDLE SET 1 SET
3-4-3 GLUE TANK (NO PNEUMATIC PRESSURE TYPE INSTEAD) 1 SET
3-4-4 METAL NEEDLE DISPENSER (YELLOW) 100 PCS
(RECOMMEND TO REPLACE IT DAILY)
3-4-5 WICK PEN (1.6MM) DISPENSER (RED) 10 PCS
(INTERCHANGEABLE WITH NEEDLE DISPENSER)
3-4-6 HOSE FOR RPERISTALTIC PUMP 15 M
(LENGTH FOR EACH USE IS ABOUT 250MM, RECOMMEND TO REPLACED IT EVERY 2 WEEKS)
3-4-7 POSITIONING SLEEVE (BLACK) FOR GLUE HOSE 24 PCS
3-4-8 QUICK CONNECTOR FOR GLUE HOSE 2 PCS
3-4-9 MANUAL / AUTO GLUE FLOW ADJ. SWITCH 1 SET
(GLUE FLOW SLAVED TO THE SPEED WITH AUTO MODE)
4 DRIVING SYSTEM 1 SET
4-1 MAIN DRIVE AC 3HP - SIEMENS - GERMANY 1 PC
4-2 INVERTER - YASKAWA - JAPAN 1 PC
4-3 MAIN DRIVE STEEL ROLLER WITH RUBBER NIP ROLLER 1 SET
4-4 METER COUNTER 1 SET
5 CANTILEVER REWIND STAND 1 SET
5-1 3" REWIND AIR SHAFT 1 PC
5-2 LOAD CELL FOR REWIND TENSION CONTROL 1 SET
5-3 POWDER CLUTCH 2.5KG/M (REWIND TENSION) 1 SET
6 PROGRAMMABLE LOGICAL CONTROL SYSTEM (PLC) - FATEK - TAIWAN 1 SET
6-1 8" COLOR LCD TOUCH SCREEN - FATEK - TAIWAN
6-2 UNWIND TENSION AUTO. CONTROL
6-3 REWIND TENSION AUTO. CONTROL
6-4 MATERIAL RUNNING OUT ALARM / AUTO. STOP
6-5 RECIPE MEMORY 99 UNITS
7 STATICS ELIMINATOR 1 SET
8 REWIND OSCILLATION DEVICE 1 SET
8-1 REWIND OSCILLATES RIGHT/LEFT 15MM
8-2 40W AC MOTOR
8-3 AC INVERTOR
8-4 OSCILLATION SPEED CONTROLLER
9 WORKING TOOL / OPERATION MANUAL EACH 1 SET

PRICE : US$49,000.00
TERM : CNF CHITTAGONG
PAYMENT : BY IRREVOCABLE AT SIGHT L/C.
LEAD TIME： WITHIN 90 DAYS AFTER RECEIPT OF L/C OR DEPOSIT.
PACKING： STANDARD EXPORTING WOODEN PALLET IN CFS CONTAINER
WARRANTY IS ONE (1) YEAR AFTER THE MACHINE BE SHIPPED FROM TAIWAN (B/L DATE),
PROVIDING THAT SUCH MALFUNCTION OR DEFECTIVE PART EXCLUDING CONSUMABLE,
WARRANTY : DAMAGE CAUSED BY HUMAN ERROR, MISHANDLING, WRONG HANDLING AND NATURE
DISASTER.

REMARK： 1.PLEASE PROVIDE CERTAIN QUANTITY OF MATERIAL FOR TRIAL.

2.ON SITE INSTALLATION AND TRAINNING EXCLUDED.

04/12/2020 FP-250 2 /4
OPTIONAL ACCESSORIES
□ 1. GERMAN MADE EPC (E+L) INSTEAD OF TAIWAN MADE EPC 1 SET US$3,180
□ 2. STROBOSCOPE 1 SET US$2,280
□ 3. HOT MELT GLUE COATING DEVICE 2 UNITS US$2,600
□ 4. VERTICAL CONTINUOUS PERFORATION DEVICE (AFTER SLEEVING) 1 SET US$3,110
4-1 HARD ROLLER 70 ° 1 PC
4-2 SHELF & FITTING 1 UNIT
4-3 PITCH 1MM BLADE 1 PC
□ 5. FORMING PLATE FOR UNDER 50MM (ON REQUEST) 1 PC US$91
□ 6. ULTRASONIC IN-LINE SLEEVE WIDTH MEASURING SYSTEM 1 SET US$12,000
6-1 MEASURING WIDTH 35~250MM
6-2 ULTRASONIC SENSOR 2 SETS
6-3 DRIVER 1 SET
6-4 CONTROL SYSTEM 1 SET
6-5 WITH RELATIVE PARTS 1 SET
6-6 SLEEVE WIDTH ABNORMAL ALARM/STOP FUNCTION (TOLERANCE CAN BE SET) 1 SET
□ 7. IN-LINE PHOSPHOR DETECTION SYSTEM 1 SET US$1,800
7-1 PHOSPHOR
PHOTOCELL(MIX
(FORWITH SEAMING MACHINE GLUE)
DETECING 500 G
7-2 PHOSPHOR) 1 SET
7-3 ABNORMAL SOLVENT INDICATION LIGHT 1 SET
7-4 UV INSPECTION LIGHT 1 SET

SUGGESTED SPARE PARTS

□ 1. STAINLESS STEEL DISPENSING NEEDLE SET 1 SET US$200
(INCLUDSIVE OF TEFLON HOSE (1.5M) & QUICK CONNECTOR * 2PCS)
□ 2. POSITIONING SLEEVE (BLACK) FOR GLUE HOSE 24 PCS US$12
□ 3. SINGLE-CHANNEL PUMP HEADS WITH ISOLATION CARD 1 SET US$360
□ 4. ISOLATION CARD FOR PUMP HEAD ` 1 PC US$30
□ 5. TEFLON HOSE 15 M US$86
□ 6. HOSE FOR RPERISTALTIC PUMP 15 M US$190
□ 7. METAL NEEDLE DISPENSER (YELLOW) 100 PCS US$30
□ 8. WICK PEN (1.6MM) DISPENSER (RED) 10 PCS US$43
□ 9. FELT FOR FORMING SECTION 8 PCS US$170
□ 10. GLUE (NO.0920 5 GL\15KG ) 1 BUCKET US$130
□ 11. HOT MELT GLUE 50 KGS US$360
□ 12. PHOSPHOR (TO BE MIXED WITH SEAMING MACHINE GLUE) 1 KG US$300

RELATIVE INFORMATION
(FOR STANDARD SPECIFICATION)
( 1).MACHINE MEASUREMENT (SPACE REQUIRE): 2.90M X 2.00M X 2.00M
( 2).GROSS WEIGHT : 1600 KG
( 3).POWER REQUIRE:
DRIVE & CONTROLLER - FULL CAPACITY 220V 14A 380V 8A 415V 8A
( 4).AIR REQUIRE: PRESSURE RANGE - 6KG/CM2 - 9KG/CM2

04/12/2020 FP-250 3 /4
04/12/2020 FP-250