PC350-8 HYDRAULIC EXCAVATOR

SPECIFICATIONS
ENGINE SWING SYSTEM

Model .......................................................... Komatsu SAA6D114E-3 Type............................................. Axial piston motor driving through
Type.............................. Common rail direct injection, water-cooled, planetary double reduction gearbox
emissionised, turbocharged, after-cooled diesel Swing lock ..................................Electrically actuated wet multi-disc
Rated capacity ................................. 184 kW/247 HP (ISO 9249 Net) brake integrated into swing motor
at engine speed ............................................................. 1.950 rpm Swing speed...................................................................... 0 - 9,5 rpm
No. of cylinders ................................................................................6 Swing torque ......................................................................102,9 kNm
Bore × stroke...............................................................114 × 135 mm
Displacement...........................................................................8,27 ltr
Battery ...................................................................... 2 × 12 V/140 Ah
DRIVES AND BRAKES
Alternator............................................................................ 24 V/60 A
Starter motor ................................................................... 24 V/11 kW Steering control ....................................... 2 levers with pedals giving
Air filter type .............................................. Double element type with full independent control of each track
monitor panel dust indicator and auto dust evacuator Drive method .....................................................................Hydrostatic
Cooling .................. Suction type cooling fan with radiator fly screen Travel operation..................................... Automatic 3-speed selection
Max. travel speeds
Lo / Mi / Hi .........................................................3,2 / 4,5 / 5,5 km/h
Maximum drawbar pull........................................................ 26.900 kg
HYDRAULIC SYSTEM Brake system........................................ Hydraulically operated discs
in each travel motor
Type..............HydrauMind. Closed-centre system with load sensing
and pressure compensation valves
Additional circuits........................... 2 additional circuits are installed
Main pump ............................2 variable displacement piston pumps UNDERCARRIAGE
supplying boom, arm, bucket, swing and travel circuits Construction.................................................. X-frame centre section
Maximum pump flow.................................................. 2 × 268 ltr/min with box section track-frames
Relief valve settings Track assembly
Implement ...........................................................................380 bar Type .............................................................................. Fully sealed
Travel ..................................................................................380 bar Shoes (each side) .......................................48 (LC/NLC); 49 (HWG)
Swing ..................................................................................285 bar Tension ...................................Combined spring and hydraulic unit
Pilot circuit ............................................................................33 bar Rollers
Track rollers (each side)................................8 (LC/NLC); 10 (HWG)
Carrier rollers (each side) ............................................................... 2

ENVIRONMENT
COOLANT AND LUBRICANT
Engine emissions .......................... Fully complies with EU Stage IIIA CAPACITY (REFILLING)
exhaust emission regulations
Noise levels Fuel tank.................................................................................... 605 ltr
LwA external ................................ 105 dB(A) (2000/14/EC Stage II) Radiator....................................................................................... 32 ltr
LpA operator ear........................ 71 dB(A) (ISO 6369 dynamic test) Engine oil..................................................................................... 35 ltr
Swing drive............................................................................... 16,5 ltr
Hydraulic tank ........................................................................... 188 ltr
Final drive (each side).................................................................... 9 ltr

OPERATING WEIGHT (APPR.)

Operating weight, including specified work equipment. High reach and medium reach includes attachment weight of 2.500 kg. Excavation
boom equipment includes 3,2 m arm and 1.290 kg bucket. All include operator, lubricant, coolant, full fuel tank.
Optional Hydraulic Wide Gauge (HWG) undercarriage adds approx. 6.115 kg to the machine weight (compared with NLC undercarriage).

HIGH REACH MEDIUM REACH EXCAVATION BOOM

PC350LC-8 PC350NLC-8 PC350LC-8 PC350NLC-8 PC350LC-8 PC350NLC-8
Triple grouser Operating Ground Operating Ground Operating Ground Operating Ground Operating Ground Operating Ground
shoes weight pressure weight pressure weight pressure weight pressure weight pressure weight pressure
600 mm 47.810 kg 0,91 kg/cm² 47.700 kg 0,91 kg/cm² 46.550 kg 0,89 kg/cm² 46.440 kg 0,88 kg/cm² 38.651 kg 0,74 kg/cm² 38.541 kg 0,74 kg/cm²
700 mm 48.190 kg 0,78 kg/cm² 48.080 kg 0,78 kg/cm² 46.930 kg 0,77 kg/cm² 46.820 kg 0,77 kg/cm² 39.031 kg 0,64 kg/cm² 39.141 kg 0,64 kg/cm²

16
 HYDRAULIC EXCAVATOR
PC350-8

Demolition
1st boom

350
B

A Transport length 8.060 mm

B Maximum boom height (incl. hydraulic lines) 1.500 mm
Transport weight with LC undercarriage (700 mm shoes, not including additional counterweight) 33.400 kg
Additional weight for hydraulic wide gauge 6.115 kg
Additional counterweight (1.470 mm × 730 mm × 535 mm) 4.490 kg

Demolition Demolition
Excavation boom 3rd boom 2nd boom

C
A
B
A
B

D Mid link
Demolition arm

EQUIPMENT EXCAVATION BOOM HIGH REACH

2,6 m arm 3,2 m arm BOOM
A Total height (incl. hydraulic lines) 2.625 mm 2.600 mm 3.205 mm
B Height 2.540 mm 2.515 mm 3.140 mm
C Length 8.110 mm 8.900 mm 10.515 mm
D Tip radius 1.675 mm 1.675 mm –
Support weight 304 kg 304 kg 755 kg
2nd boom weight 2.490 kg 2.490 kg 1.270 kg
1)
3rd boom weight – – 2.500 kg
Mid link weight – – 810 kg
Arm weight 1) 1.710 kg 1.850 kg 1.790 kg
Bucket weight 1.290 kg 1.290 kg –
2)
Total weight 6.040 kg 6.180 kg 8.555 kg
1) Not including hydraulic cylinder.
2) Including hydraulic cylinders, links, hydraulic lines, stands and stated attachment weight.
17
 PC350-8 HYDRAULIC EXCAVATOR

TRANSPORT DIMENSIONS M

D
B

350
P
O

F
E
K H
I
N
C

M M

A D
B
P
O

350
P
O

F
G

K H H
J I I
L N N
C

MACHINE DIMENSIONS HIGH REACH MEDIUM REACH

A Overall width of upper structure 1) 2.995 mm 2.995 mm
B Overall height of cab, with FOPS 2) 3.305 mm 3.305 mm
2)
Overall height of cab, without FOPS 3.100 mm 3.100 mm
C Overall length of basic machine 6.250 mm 6.250 mm
D Tail length 3.775 mm 3.775 mm
E Clearance under counterweight 1.185 mm 1.185 mm
F Machine tail height 2.585 mm 2.585 mm
G Ground clearance 498 mm 498 mm
Ground clearance (HWG undercarriage) 449 mm 449 mm
H Tumbler centre distance 4.030 mm 4.030 mm
I Track length 4.955 mm 4.955 mm
J Track gauge 2.590 mm (2.390 mm) 2.590 mm (2.390 mm)
Track gauge (HWG undercarriage) 2.280 - 3.180 mm 2.280 mm - 3.180 mm
K Track shoe width (700 mm only for HWG undercarriage) 600 mm, 700 mm 600 mm, 700 mm
3)
L Overall track width with 600 mm shoes 3.190 mm (2.990 mm) 3.190 mm (2.990 mm)
3)
Overall track width with 700 mm shoes 3.290 mm (3.090 mm) 3.290 mm (3.090 mm)
Overall track width with 700 mm shoes (HWG undercarriage) 2.980 mm - 3.880 mm 2.980 mm - 3.880 mm
M Transport length 17.800 mm 15.150 mm
N Length on ground (transport) 16.100 mm 13.450 mm
O Overall height (to top of boom) 2.880 mm 2.950 mm
P Overall height (to top of hose) 3.150 mm 3.150 mm
1) Overall width of upper structure excludes side guards, handrails and mirrors. Side guards can be removed if transport width of less than 3 m is required.
2) Overall height with Hydraulic Wide Gauge (HWG) undercarriage: + 105 mm
18 3) NLC figures in brackets ()
 HYDRAULIC EXCAVATOR
PC350-8

EXCAVATION BOOM - BENT POSITION

M
P

B
350
O

ARM LENGTH 2,6 m 3,2 m

M Overall transport length 12.045 mm 11.955 mm
N Transport length 6.930 mm 9.220 mm
B Transport height (to top of cab, with FOPS) 3.305 mm 3.305 mm
Transport height (to top of cab, without FOPS) 3.085 mm 3.085 mm
O Transport height (to top of boom) 3.420 mm 3.225 mm
P Transport height (to top of hose) 3.740 mm 3.550 mm
Overall height with Hydraulic Wide Gauge (HWG) undercarriage: + 105 mm

EXCAVATION BOOM - STRAIGHT POSITION

M
B
P
O

350

ARM LENGTH 2,6 m 3,2 m

M Overall transport length 12.760 mm 12.670 mm
N Transport length 8.520 mm 7.780 mm
B Transport height (to top of cab, with FOPS) 3.305 mm 3.305 mm
Transport height (to top of cab, without FOPS) 3.085 mm 3.085 mm
O Transport height (to top of boom) 3.050 mm 3.165 mm
P Transport height (to top of hose) 3.300 mm 3.400 mm
Overall height with Hydraulic Wide Gauge (HWG) undercarriage: + 105 mm

19
 PC350-8 HYDRAULIC EXCAVATOR

WORKING RANGE
HIGH REACH DEMOLITION
C
26m

24m

22m

20m

18m

16m

14m

12m

A
10m

8m

E
6m

4m
F

2m

350

G.L.
14m 12m 10m 8m 6m 4m 2m 0m

B D

HIGH REACH DEMOLITION

A Max. working height (to pin at arm end) 23.060 mm
B Max. forward reach 12.000 mm
C Min. swing radius of arm end pin (max. height) 4.430 mm
D Tail swing radius 3.820 mm
E Height at max. reach 14.955 mm
F Min. boom angle from ground at max. height 75º
This working range is applicable through 360 degrees (depending upon fitted attachment) (for LC or HWG undercarriage). For operator and jobsite safety, Komatsu
recommend that high reach demolition machines work in line with the trackframe where ever possible.
20
 HYDRAULIC EXCAVATOR
PC350-8

MEDIUM REACH DEMOLITION

C
24m

22m

20m

18m

16m

14m

12m

10m
A

8m

6m
E

4m
F

2m

350

G.L.

16m 14m 12m 10m 8m 6m 4m 2m 0m

B D

MEDIUM REACH DEMOLITION

A Max. working height (to pin at arm end) 20.390 mm
B Max. forward reach 12.000 mm
C Min. swing radius of arm end pin (max. height) 4.010 mm
D Tail swing radius 3.820 mm
E Height at max. reach 11.950 mm
F Min. boom angle from ground at max. height 70º
This working range is applicable through 360 degrees (depending upon fitted attachment) (for LC or HWG undercarriage). For operator and jobsite safety, Komatsu
recommend that high reach demolition machines work in line with the trackframe where ever possible.
21
 PC350-8 HYDRAULIC EXCAVATOR

WORKING RANGE

EXCAVATION BOOM
- BENT POSITION

350

ARM LENGTH 2,6 m 3,2 m

A Max. digging height 10.730 mm 10.845 mm
B Max. dumping height 7.665 mm 7.810 mm
C Max. digging depth 6.485 mm 7.120 mm
D Max. vertical wall digging depth 5.675 mm 6.075 mm
E Max. digging reach 10.925 mm 11.425 mm
F Max. digging reach at ground level 10.735 mm 11.245 mm
G Min. swing radius (bucket loaded) 4.095 mm 3.970 mm
H Tail swing radius 3.820 mm 3.820 mm

EXCAVATION BOOM
- STRAIGHT POSITION

350

ARM LENGTH 2,6 m 3,2 m

A Max. digging height 13.520 mm 14.020 mm
B Max. dumping height 10.180 mm 10.680 mm
C Max. digging depth 4.915 mm 5.550 mm
D Max. vertical wall digging depth 4.295 mm 4.910 mm
E Max. digging reach 11.955 mm 12.540 mm
F Max. digging reach at ground level 11.780 mm 12.375 mm
G Min. swing radius (bucket loaded) 3.265 mm 3.295 mm
H Tail swing radius 3.820 mm 3.820 mm
22
 HYDRAULIC EXCAVATOR
PC350-8

LIFTING CAPACITY
PC350LC-8
A – Reach from swing centre – Rating over front
When removing bucket, linkage
or cylinder, lifting capacities can
be increased by their respective
B – Bucket hook height – Rating over side weights
C – Lifting capacities, including bucket, – Rating at maximum reach
bucket linkage and bucket cylinder

EXCAVATION BOOM - BENT POSITION

A 9,0 m 7,5 m 6,0 m 4,5 m 3,0 m

Arm length
B

9,0 m kg 7150 * 7150 *

7,5 m kg 6800 * 6400 8900 * 7150
6,0 m kg 6750 * 5150 10250 * 7000 11700 * 10350
4,5 m kg 6950 * 4450 7650 4800 10500 6700 13200 * 9600 17400 * 15000
2,6 m
3,0 m kg 6600 4050 7450 4600 10050 6250 14300 8750 17200 * 13050
1,5 m kg 6400 3900 7250 4400 9600 5850 13550 8050 11450 * 11450 *
1.014 kg 0,0 m kg 6500 3900 7050 4250 9300 5600 13050 7650 14200 * 11550
1,38 m3
-1,5 m kg 6950 4150 7000 4150 9150 5450 12850 7500 18050 * 11550 10450 * 10450 *
-3,0 m kg 8000 4800 9150 5450 12900 7550 15950 * 11750 15950 * 15950 *
-4,5 m kg 11300 * 7800 14100 * 12150

9,0 m kg 4950 * 4950 *

7,5 m kg 4750 * 4750 * 7700 * 7350
6,0 m kg 4750 * 4600 6400 5000 9500 * 7150
4,5 m kg 4900 * 4000 7700 4850 10300 * 6750 12200 * 9850 15750 * 15750 24300 * 24300 *
3,2 m
3,0 m kg 5200 * 3650 7450 4600 10150 6300 13900 * 9000 17350 * 13800
1,5 m kg 5750 * 3500 7200 4350 9650 5900 13700 8200 17400 * 12300
1.014 kg 0,0 m kg 5900 3500 7000 4150 9250 5550 13100 7650 16300 * 10450
1,38 m3
-1,5 m kg 6250 3650 6850 4050 9050 5350 12800 7400 17750 * 10250 10600 * 10600 *
-3,0 m kg
-4,5 m kg

EXCAVATION BOOM - STRAIGHT POSITION

A 10,5 m 9,0 m 7,5 m 6,0 m 4,5 m

Arm length
B

9,0 m kg 7650 * 5650 10350 * 6800 10750 * 10300 9850 * 9850 *

7,5 m kg 7050 * 4400 7550 4700 10650 6800 10850 * 10100 9700 * 9700 *
6,0 m kg 6150 3700 7500 4650 10350 6500 13900 * 9500 16750 * 15200
4,5 m kg 5550 3300 7300 4500 9900 6100 14200 8650
2,6 m 3,0 m kg 5300 3100 5500 3250 7100 4250 9450 5700 13300 7850
1,5 m kg 5200 3050 5400 3150 6900 4100 9050 5350 12650 7300
1.014 kg 0,0 m kg 5350 3100 5400 3150 6750 3950 8850 5200 12450 7100
1,38 m3
-1,5 m kg 5650 * 3350 6750 3950 8800 5150 12050 * 7100
-3,0 m kg 5650 * 4050 7850 * 5250 9150 * 7300
-4,5 m kg

9,0 m kg 5250 * 4750 8300 * 6950 8200 * 8200 * 7300 * 7300 *

7,5 m kg 4900 * 3800 7650 4800 8700 * 6900 8300 * 8300 * 9950 * 9950 *
6,0 m kg 4750 * 3200 5600 3350 7550 4700 9950 * 6600 10100 * 9700
4,5 m kg 4700 * 2900 5550 3300 7350 4500 10000 6200 14500 8900
3,2 m 3,0 m kg 4750 2700 5450 3200 7050 4250 9500 5750 13550 8050
1,5 m kg 4650 2650 5300 3050 6850 4000 9050 5350 12800 7400
1.014 kg 0,0 m kg 4750 2700 5250 3000 6650 3850 8800 5100 12400 7050
1,38 m3
-1,5 m kg 5050 2900 5250 3000 6600 3800 8650 5000 12300 6950 9100 * 9100 *
-3,0 m kg 6650 3850 8700 5050 10500 * 7050
-4,5 m kg
Lifting capacity table is published for guidance only, the machine is not intended for use as a crane.
Lifting capacities are stated in kg, on the tip of the arm, for machine on firm, level supporting surface.
The weight of any attachment used should be deducted from the values shown, to calculate payload.
Indicated loads are based on ISO 10567 standard and do not exceed 75% of tipping or 87% of hydraulic capacity (indicated by *). 23
Lifting capacity of the machine is limited by machine stability, hydraulic capacity and maximum permissible load of the attachment.