This document provides information about SustaABS, an acrylonitrile butadiene styrene plastic material. It discusses the material's properties, applications, sizes available, and compliance information. Key points include that SustaABS is easy to machine and fabricate, has good impact resistance and stiffness, and is suitable for structural applications. It is available in natural and black colors in various sheet, rod, and tube sizes.
This document provides information about SustaABS, an acrylonitrile butadiene styrene plastic material. It discusses the material's properties, applications, sizes available, and compliance information. Key points include that SustaABS is easy to machine and fabricate, has good impact resistance and stiffness, and is suitable for structural applications. It is available in natural and black colors in various sheet, rod, and tube sizes.
This document provides information about SustaABS, an acrylonitrile butadiene styrene plastic material. It discusses the material's properties, applications, sizes available, and compliance information. Key points include that SustaABS is easy to machine and fabricate, has good impact resistance and stiffness, and is suitable for structural applications. It is available in natural and black colors in various sheet, rod, and tube sizes.
This document provides information about SustaABS, an acrylonitrile butadiene styrene plastic material. It discusses the material's properties, applications, sizes available, and compliance information. Key points include that SustaABS is easy to machine and fabricate, has good impact resistance and stiffness, and is suitable for structural applications. It is available in natural and black colors in various sheet, rod, and tube sizes.
General Info SUSTAABS (acrylonitrile butadiene styrene) is a low cost mechanical plastic that is easy to machine and fabricate. SUSTAABS is well suited for structural applications where impact resistance, strength and stiffness are required. SUSTAABS comes in Natural (beige) and Black.
Click for more information on the complete line of ABS Products (/family/abs)
By using this site, you agree to our updated Privacy Policy (/About-Us/Privacy-Policy) OK Key Properties and our Terms of Use (/About-Us/Terms-Of-Use) Feedback (/Feedback) (/) Easily Machined and Bonded Good Chemical Resistance Good Impact Resistance Paintable Relative Low Cost Rigid
Limitations Poor chemical resistance to petroleum-based oils, solvents, and paints. These will cause the material to craze.
Applications Automotive Parts Bins and Trays Housings Prototypes Structural Applications Thermoformed Parts Water Puri cation Equipment
Resin Trade Names
Manufacturer Trade Names SustaABS
Boedeker Plastics, Inc. stocks & supplies plastic sheet, rod, tube, lm and custom pro les and machine parts from these shapes that are produced from plastic resin. In many cases the manufacturer of the shape has their own product trade name. If your speci cation calls for a speci c resin grade or manufacturer trade name, we can supply a shape made from that resin to meet your speci cation or suggest an equal. If you require a speci c resin or brand it must be speci ed at the time of order.
Available Sizes Sheet* Thickness .375” to 6.000” Width & Length 24.000” x 48.000”
Thickness .500” to 2.000”
Width & Length 48.000” x 96.000” Width & Length 48.000” x 120.000”
Rod* OK Diameters By using this.250” to agree site, you 6.000” Length to our 10’Privacy Policy (/About-Us/Privacy-Policy) updated and our Terms Diameters of Useto(/About-Us/Terms-Of-Use) 7.000” 12.000” Length 3’ Feedback (/Feedback) (/) Tube* Various Sizes Available OD & ID vary depending on formulation. (*) Minimums may apply for some formulations depending on grade & shape size required.
Boedeker offers cut to size service on all in-stock items and same day shipping. If you don’t see the size your looking for contact us for alternative options.
Available Colors Natural (beige) Black
Safety Data Sheet
Contact Us (/Contact-Us)
By using this site, you agree to our updated Privacy Policy (/About-Us/Privacy-Policy) OK and our Terms of Use (/About-Us/Terms-Of-Use) Feedback (/Feedback) (/) Typical Properties of SustaABS DETAIL
Description Value
Material Type Amorphous Thermoplastic
Chemical Name ABS Acrylonitrile Butadiene
Styrene
Trade Name SustaABS
Additives Un lled
Color Natural
Manufacturer Rochling
PHYSICAL
Unit of Property Test Measure Value
Density ASTM g/cm³ 1.04
D792
ASTM lb/in³ 0.038
D792
Water Absorption, 24 hrs, Immersion ASTM % by wt. 0.45
D570
Water Absorption, Saturation, ASTM % by wt. 0.45
Immersion D570
MECHANICAL
Unit of Property Test Measure Value
Tensile Strength ASTM psi 6,100
D638
Tensile Modulus ASTM psi 310,000
D638
Tensile Elongation at Break ASTM % 40
By using this site, you agree to our updated Privacy Policy (/About-Us/Privacy-Policy) OK D638 and our Terms of Use (/About-Us/Terms-Of-Use) Feedback (/Feedback) DETAIL (/)
Flexural Strength ASTM psi 10,500
D790
Flexural Modulus ASTM psi 340,000
D790
Compressive Strength ASTM psi 7,600
D695
Hardness ASTM NA Rockwell R102
D785
IZOD Impact-Notched ASTM ft-lb/in 4.03
D256
Dynamic Coe cient of Friction NA 0.35
THERMAL
Unit of Property Test Measure Value
Coe cient of Linear Thermal ASTM x 10-5 in./in./ 4.89
Expansion D696 °F
Heat De ection Temp ASTM °C at 264 psi 95
D648
ASTM °F at 264 psi 203
D648
Max Continuous Operating Temp °C 77
°F 170
Thermal Conductivity ASTM BTU-in/ft²-hr- 1.2
C117 °F
Flammability Rating UL94 NA HB
ELECTRICAL
Unit of Property Test Measure Value
Dielectric Strength ASTM V/mil 450
OK D149 By using this site, you agree to our updated Privacy Policy (/About-Us/Privacy-Policy) and our Terms of Use (/About-Us/Terms-Of-Use) Feedback (/Feedback) DETAIL (/)
Dielectric Constant at 1 MHz ASTM NA 3.2
D150
Dissipation Factor at 1 MHz ASTM NA 0.015
D150
Surface Resistivity ASTM ohm/square 10^16
D257
COMPLIANCE
Description Value
FDA No
USDA No
NSF No
3-A Dairy No
Canadian Food Inspection Agency No
USP Class VI No
OTHER
Description Value
ASTM Shape Spec ASTM D4673
UV Resistant No
Relative Cost $$
Machinability 1
Relative cost based on a scale of one dollar sign ($) as the lowest to ten dollar signs ($$$$$$$$$$) as the highest. Machinability based on a scale of 1 to 10, with 1 being the easiest and 10 being the most di cult to machine. NOTE: All information contained on www.boedeker.com, downloadable documents and printed literature is intended for technical reference only and considered to be accurate for reference purposes only. Boedeker Plastics, Inc. makes no guarantee and offers no warranty for tness in use and strongly recommends the user validate any plastic, machined part, or product in a speci c application for tness in use.
By using this site, you agree to our updated Privacy Policy (/About-Us/Privacy-Policy) OK and our Terms of Use (/About-Us/Terms-Of-Use) Feedback (/Feedback)
