*** TechnipFMC ***

REPORT BY: Taylor, Angela 04−FEB−2020 Page: 1 OF 4

PART REPORT
_____________________________________________________________________________
PART DESCRIPTION
PART NUMBER: DRAWING NO:
3259262 T−BODY CHOKE ASSEMBLY 1 13/16 15000 CWP DU500009767
REVISION: M ADJUSTABLE 2 FIG 1502 F X M ENDS W/1−1/8 DRAWING REV: C
ECN: 5035771 AUTOCLAVE PORT 9 IN DIA HANDWHEEL DWG OWN: STE COE

TYPE: N STATUS: RELEASED OWNERSHIP: STE COE UOM: EA WEIGHT: 121 (55)
LBS (KGS)
_____________________________________________________________________________
PART DATA
PROD SPEC : NA QUALITY LVL: NA
MATL CLASS: TEMP RANGE:
PR# : GR# : SRV CLASS:
_____________________________________________________________________________
REVIEWED BY: Mathew, Prat REVIEW DATE : 23−JUL−2014
APPROVED BY: Soltau, James APPROVAL DATE: 24−JUL−2014
_____________________________________________________________________________
BILL OF MATERIAL

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
1 3259247 CHOKE BODY 1 13/16 DU500007303 EA 1 M20122 ALT
15000 CWP 22500 TEST W/
9/16 TBG (1−1/8 THD)
F562C AUTOCLAVE PORT
F/STANDARD AND SOUR GAS
SERVICE
2 3201564U NUT UNION 2 FIG 1502 6250DU5000847 EA 1
15000 CWP UNPAINTED
3 3208192 RETAINER SEGMENT UNION 6250DU5000816 EA 3 M25069
2 FIG 1502 F/DETACHABLE
NUT 15000 CWP
4 3226860 RETAINER RING, EXTERNAL NO−DWG EA 1
SPIROLOX, 3.075 FREE
DIA X .093 THICK,
CARBON STL
5 3232434 SEAL RING UNION 2 FIG 6250DU5000871 EA 1 E57005
402, 602, 1002 & 1502
FLUOROELASTOMER 80
DUROMETER
6 C90−228 O−RING, 2.234 ID X NO−DWG EA 2 E50124
0.139 CS, UNIFORM NO.
228, FLUOROELASTOMER
FKM 90 DURO PER ENGR
SPEC E50124, BATCH
MANAGEMENT
7 3259270 RING: BACKUP 2.25 ID X NO−DWG EA 2
2.50 OD X .118
THICKNESS, FLUOROELAST−
OMER, (PARKER #228 OR
EQ) 90 DURO
8 15011667 CHOKE BONNET BODY 1 DU500007252 EA 1 M20119
13/16 10000 CWP SG &
15000 CWP STD SERVICE

(continued...)
 *** TechnipFMC ***

REPORT BY: Taylor, Angela 04−FEB−2020 Page: 2 OF 4

P/N: 3259262 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
F/STANDARD AND SOUR GAS
SERVICE
9 68150000 CHOKE HANDWHEEL, 9 IN DU500007424 EA 1 M15020
DIA, W/ 3/4IN SQ, W/1
IN TPF
10 3259231 CHOKE COUPLING NUT, 1 DU500003612 EA 1
13/16 10000 CWP SG &
15000 CWP STD SERVICE
11 15021141 CHOKE INDICATOR DRUM, DU500007269 EA 1 E55201
F/ 1−13/16 CHOKES
ACETAL COPOLYMER
(DELRIN−PLASTIC)
12 15011155 CHOKE INDICATOR SLEEVE, DU500007266 EA 1 M45028
F/ 1−13/16 CHOKES
ALUMINUM
13 15011141 RETAINER RING, INTERNAL NO−DWG EA 1
SPIROLOX, 1.960 FREE
DIA X .049 THICK, 300
SER SST
14 48081105 CHOKE SEAL, F/ 1−13/16 DU500007358 EA 1 E57038
CHOKES .437 CS X 1.625
ID FLUOROELASTOMER, 75
DURO
15 48100059 CHOKE BONNET SPRING DU500007297 EA 1 M11000
GARTER OD TYPE, F/ 1−
13/16 CHOKES 2.750 PD X
.250 DIA WIRE CARBON
STEEL
16 79030533 THUMB SCREW; TYPE B, 6000DU5015000 EA 1 M12204
3/8−16 UNC−2A X 1.000
LONG, PER ASME B18.17,
ALLOY STEEL, XYLAN
COATED
17 15181180 CHOKE BONNET BALL, F/ DU500007356 EA 1 E55201
1−13/16 CHOKES .312
ACETAL COPOLYMER
(DELRIN−PLASTIC)
18 15011599 CHOKE STEM NAMEPLATE, DU500007265 EA 1
F/ 1−13/16 CHOKES
ALUMINUM
19 15021165 SET SCREW; SLOTTED NO−DWG EA 1 M40102
HEADLESS, FLAT POINT,
5/16−18 UNC−2A X .313
LONG, PER ASME B18.3,
BRASS, PLAIN
20 15011575 CHOKE CHEVRON PACKING DU500007360 EA 1
SET, F/ 1−13/16 CHOKES
1−3/4 OD X 1−1/8 ID X
1−3/8 LG
21 1120244 NUT; NYLON INSERT HEX NO−DWG EA 1
LOCK, 5/8−11 UNC−3B,
STAINLESS STEEL, ZINC

(continued...)
 *** TechnipFMC ***

REPORT BY: Taylor, Angela 04−FEB−2020 Page: 3 OF 4

P/N: 3259262 PART REPORT
_____________________________________________________________________________
BILL OF MATERIAL (Continued)

ITEM PART NUMBER DESCRIPTION DWG NUMBER UM QTY MATERIAL

−−−− −−−−−−−−−−−−−−− −−−−−−−−−−−−−−−−−−−−−−− −−−−−−−−−−−−−−− −− −−−−−− −−−−−−−−
COATED
22 P539999 STEM ASSEMBLY, F/ 1− DU500009837 EA 1
13/16 CHOKES W/TUNGSTEN
CARBIDE POINT SHRUNK
FIT
23 15011136 CHOKE JUNK RING, F/ 1− DU500007273 EA 1 M30113
13/16 CHOKES 1.875 OD X
1.141 ID X .281 LG SST
24 3259240 CHOKE INLET 2 FIG 1502 DU500007317 EA 1
FEMALE SUB END X 3−3/8−
8 ACME THD F/ 15000 CWP
25 3259242 CHOKE OUTLET 2 FIG 1502 DU500007324 EA 1
MALE SUB END F/DET NUT
X 3−3/8−8 ACME THD F/
15000 CWP
26 3258561 LOCK NUT, F/CHOKE DU500004766 EA 2
ASSEMBLY
27 15021231 CHOKE SEAT, F/ 1−13/16 DU500008088 EA 1 M33001
CHOKE SEAT, SST,
PARTIALLY LINED
W/TUNGSTEN CARBIDE
LINER .75 ORIFICE
28 P514798 PLUG, AUTOCLAVE HIGH NO−DWG EA 1
PRESSURE, F562C
29 P514799 GLAND NUT, AUTOCLAVE NO−DWG EA 1
HIGH PRESSURE, F562C
30 P513840 BUCKLE; FOR 0.500 WIDTH NO−DWG EA 1
X 0.030 THK BANDING,
STAINLESS STEEL
31 P513730 BANDING; 0.500 WIDTH X NO−DWG IN 18
0.030 THK, 201
STAINLESS STEEL
32 P533643 CE LABEL FOR FLOWLINE DU500004404 EA 1
PRODUCTS − 3M #7871 2
MIL, GLOSS WHITE
POLYESTER THERMAL
TRANSFER UL LABEL, 2.50
IN X 1.25 IN, 4400/RL,
3 IN CORE WOUND OUT,
PRINTED FMC LOGO PMS
485
_____________________________________________________________________________
REQUIREMENTS MATRIX: 6QM5001
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
SECTION: 314.0 REV: A OWNER: STE COE STATUS: RELEASED
ASSEMBLY

Q00024 VISUAL INSPECTION, HANDLING, STORAGE AND SHIPPING

REQUIREMENTS FOR FLUID CONTROL EQUIPMENT

_____________________________________________________________________________
ENGINEERING NOTES AND SPECIFICATIONS

(continued...)
 *** TechnipFMC ***

REPORT BY: Taylor, Angela 04−FEB−2020 Page: 4 OF 4

P/N: 3259262 PART REPORT
_____________________________________________________________________________
ENGINEERING NOTES AND SPECIFICATIONS (Continued)

STD NOTE : SN500000096 REV: A

COMPONENT: T−BODY CHOKE ASSY ASSEMBLY: STD SER ASSY
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
Q50109 ASSEMBLE T−BODY CHOKE PER SPECIFICATION.

Q50108 HYDROSTATICALLY PRESSURE TEST PER SPECIFICATION.

C85006 PAINT PER SPECIFICATION.

Q00286 STAMP AND LOCATE NAMEPLATE BANDING PER SPECIFICATION.

−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
ENGINEERING SPECIFICATIONS:

Q00250 PRESSURE PUMPING USE ONLY − SPECIFICATION FOR SERIALIZATION OF

VARIOUS FLUID CONTROL PRODUCTS
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
=============================================================================
=================================END OF PART=================================