MODEL M1018

SMALL COMBO LATHE / MILL

Product Dimensions
Weight.......................................................................................................... 440 lbs.
Width (side‐to‐side) x Depth (front‐to‐back) x Height........................................ 42 x 23 x 35 in.
Footprint (Length x Width).............................................................................. 42 x 23 in.

Shipping Dimensions
Type....................................................................................................... Wood Crate
Content........................................................................................................ Machine
Weight.......................................................................................................... 478 lbs.
Length x Width x Height........................................................................... 41 x 23 x 39 in.

Electrical
Power Requirement.................................................................... 110V, Single‐Phase, 60 Hz
Prewired Voltage................................................................................................. 110V
Full‐Load Current Rating........................................................................................... 9A
Minimum Circuit Size............................................................................................. 15A
Connection Type......................................................................................... Cord & Plug
Power Cord Included.............................................................................................. Yes
Power Cord Length............................................................................................... 6 ft.
Power Cord Gauge............................................................................................ 16 AWG
Plug Included....................................................................................................... Yes
Included Plug Type............................................................................................... 5‐15
Switch Type................................................................................. Push Button, Reversing

Motors
Main
Horsepower.............................................................................................. 3/4 HP
Phase.............................................................................................. Single‐Phase
Amps........................................................................................................... 9A
Speed.................................................................................................. 1725 RPM
Type......................................................................... TEFC Capacitor‐Start Induction
Power Transfer ..................................................................................... Belt Drive
Bearings............................................................... Shielded & Permanently Lubricated
Centrifugal Switch/Contacts Type.................................................................. Internal

Model M1018 Machine Specifications, Page 1 of 3

Main Specifications
Lathe Info
Swing Over Bed...................................................................................... 16‐1/2 in.
Distance Between Centers......................................................................... 19‐1/4 in.
Swing Over Saddle.................................................................................. 11‐1/2 in.
Compound Travel.......................................................................................... 3 in.
Carriage Travel...................................................................................... 14‐3/4 in.
Cross Slide Travel.................................................................................... 4‐1/2 in.
Spindle Bore............................................................................................. 3/4 in.
Spindle Taper.............................................................................................. MT#3
Number Of Spindle Speeds................................................................................... 7
Spindle Speeds................................................................................ 160 – 1360 RPM
Tailstock Quill Travel................................................................................ 1‐1/2 in.
Tailstock Taper........................................................................................... MT#3
Tailstock Offset......................................................................................... 1/2 in.
Number of Longitudinal Feeds............................................................................... 8
Range of Longitudinal Feeds...................................................... 0.002 – 0.0069 in./rev.
Number of Inch Threads..................................................................................... 27
Range of Inch Threads............................................................................ 8 – 120 TPI
Number of Metric Threads.................................................................................. 18
Range of Metric Threads....................................................................... 0.2 – 3.0 mm

Mill Info
Mill Taper.................................................................................................. MT#3
Mill Spindle Travel................................................................................... 3‐1/2 in.
Mill Swing.................................................................................................. 12 in.
Distance Spindle To Work Table....................................................................... 10 in.
Distance Spindle To Bed........................................................................... 15‐3/4 in.
Distance Spindle To Vise............................................................................ 8‐1/4 in.
Distance Spindle To Center Line................................................................... 9‐3/4 in.
Mill Head Vertical Travel................................................................................. 3 in.
Maximum Tool Bit Size................................................................................. 1/2 in.
Drilling Capacity For Steel............................................................................ 7/8 in.
Drilling Capacity For Cast Iron........................................................................ 7/8 in.
Table Size Length.................................................................................... 7‐1/4 in.
Table Size Width........................................................................................... 6 in.
Table Size Thickness................................................................................. 1‐1/2 in.
Vise Jaw Opening..................................................................................... 3‐1/8 in.
Drawbar Diameter...................................................................................... 3/8 in.
Drawbar TPI................................................................................................... 16
Drawbar Length..................................................................................... 10‐3/4 in.
Number of Mill Drill Speeds................................................................................. 14
Mill Speed Range.............................................................................. 117 – 1300 RPM

Construction
Bed................................................................ Hardened & Precision‐Ground Cast Iron
Headstock............................................................................................. Cast Iron
Body.................................................................................................... Cast Iron
Frame.................................................................................................. Cast Iron
End Gears.................................................................................................. Steel
Paint Type/Finish...................................................................................... Enamel

Model M1018 Machine Specifications, Page 2 of 3

 Other
Bed Width............................................................................................. 5‐1/2 in.
Floor To Center Height.................................................................................. 16 in.
Carriage Leadscrew Diameter........................................................................ 7/8 in.
Carriage Leadscrew TPI....................................................................................... 6
Carriage Leadscrew Length............................................................................. 24 in.
Cross Slide Leadscrew Diameter...................................................................... 1/2 in.
Cross Slide Leadscrew TPI.................................................................................. 10
Cross Slide Leadscrew Length........................................................................... 9 in.
Coolant System............................................................................................... No
Optional Stand............................................................................................... No

Other
Country of Origin ............................................................................................... China
Warranty ....................................................................................................... 2 Years
Approximate Assembly & Setup Time ...................................................................... 1 Hour
ISO 9001 Factory ................................................................................................... No
Certified by a Nationally Recognized Testing Laboratory (NRTL) .......................................... No

Features
T‐Slots in Cross Slide
Cuts Inch and Metric Threads
Built‐in Vise
Fine Down‐Feed
Turret Tool Post
Adjustable Mill/Drill Head

Accessories
1/2" Drill Chuck with Arbor
2 Dead Centers
4" 3‐Jaw Chuck
4‐Way Tool Post
5" Back Plate
9‐1/2" Face Plate
Change Gears
MT#3 Chuck Arbor
Hex and Combo Wrenches

Model M1018 Machine Specifications, Page 3 of 3