Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    Chapter 11 - Gear - 11

    Uploaded by

    HEMANTKHERA
    This document provides examples for calculating gear properties using both inch and metric units. It gives the calculations to find the pitch diameter, circular pitch, and outside diameter for a spur gear with 32 teeth and a diametral pitch of 8 using inch units. It also shows the equivalent calculations using a module of 8 mm and 35 teeth in metric units. The example problem finds the pitch diameter, circular pitch, and shaft center-to-center distance for a pinion and gear set.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Chapter 11 - Gear - 11

    Uploaded by

    HEMANTKHERA
    47 views1 page
    This document provides examples for calculating gear properties using both inch and metric units. It gives the calculations to find the pitch diameter, circular pitch, and outside diameter for a spur gear with 32 teeth and a diametral pitch of 8 using inch units. It also shows the equivalent calculations using a module of 8 mm and 35 teeth in metric units. The example problem finds the pitch diameter, circular pitch, and shaft center-to-center distance for a pinion and gear set.

    Original Description:

    GEAR BASIC

    Original Title

    Chapter 11 -Gear_11

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides examples for calculating gear properties using both inch and metric units. It gives the calculations to find the pitch diameter, circular pitch, and outside diameter for a spur gear with 32 teeth and a diametral pitch of 8 using inch units. It also shows the equivalent calculations using a module of 8 mm and 35 teeth in metric units. The example problem finds the pitch diameter, circular pitch, and shaft center-to-center distance for a pinion and gear set.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    47 views1 page

    Chapter 11 - Gear - 11

    Uploaded by

    HEMANTKHERA
    This document provides examples for calculating gear properties using both inch and metric units. It gives the calculations to find the pitch diameter, circular pitch, and outside diameter for a spur gear with 32 teeth and a diametral pitch of 8 using inch units. It also shows the equivalent calculations using a module of 8 mm and 35 teeth in metric units. The example problem finds the pitch diameter, circular pitch, and shaft center-to-center distance for a pinion and gear set.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Inch units Metric units

    „ A spur gear of the 14 ½ degree involute system „ A spur gear of the 14 ½ degree involute system
    has 32 teeth of diametral pitch 8. Find has a module of 8 mm and 35 teeth. Find
    „ The pitch diameter „ The pitch diameter
    „ The circular pitch „ The circular pitch
    „ The outside diameter (addendum diameter) „ The outside diameter (addendum diameter)

    August 15, 2007 61 August 15, 2007 62

    Example Problem 11-3: Pressure Angle


    • For the set of gears shown in Figure 11-17, if diametral pitch is 8, find the pitch
    Example Problem 11-3: Pressure Angle (cont’d.)
    diameter, circular pitch, and shaft center-to-center distance.
    • The pinion has 16 teeth and the gear has 32 teeth.

    − Centerline distance:
    − Pitch diameter:
    (11-4)
    Dp =
    Np
    or
    Ng (11-2)
    Pd Pd

    − Pinion: Dp Dg Np + Ng
    C-C = + or C - C =
    Dp =
    16
    = 2 inches
    2 2 2Pd
    8

    − Gear: 16 + 32
    32 C-C =
    Dp = = 4 inches 2 (8)
    8

    − Circular pitch: C – C = 3 inches


    (11-3)
    π Dp
    Pc =
    Np
    • Circular pitch would be the same
    π 2 in
    Pc =
    16
    = .393 inch for both pinion and gear.
    August 15, 2007 63 August 15, 2007 64

    August 15, 2007 65 August 15, 2007 66

    11

    You might also like