Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Design of Column Base Plate: COLUMN 1 (C-1) COLUMN 1a (C-1')

    Uploaded by

    andre villanueva
    The document describes the design of a column base plate for Column 1 (C-1) and Column 1a (C-1'). It provides the steel properties, loads, and calculations to determine the required base plate area, dimensions, bearing pressure, and plate thickness. For C-1, the design calls for a 700mm x 700mm base plate with a thickness of 40mm. For C-1a, the same size plate of 700mm x 700mm x 40mm thick is required.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd

    Design of Column Base Plate: COLUMN 1 (C-1) COLUMN 1a (C-1')

    Uploaded by

    andre villanueva
    44 views6 pages
    The document describes the design of a column base plate for Column 1 (C-1) and Column 1a (C-1'). It provides the steel properties, loads, and calculations to determine the required base plate area, dimensions, bearing pressure, and plate thickness. For C-1, the design calls for a 700mm x 700mm base plate with a thickness of 40mm. For C-1a, the same size plate of 700mm x 700mm x 40mm thick is required.

    Original Title

    Column-Base-Plate

    Copyright

    © © All Rights Reserved

    Available Formats

    RTF, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the design of a column base plate for Column 1 (C-1) and Column 1a (C-1'). It provides the steel properties, loads, and calculations to determine the required base plate area, dimensions, bearing pressure, and plate thickness. For C-1, the design calls for a 700mm x 700mm base plate with a thickness of 40mm. For C-1a, the same size plate of 700mm x 700mm x 40mm thick is required.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    44 views6 pages

    Design of Column Base Plate: COLUMN 1 (C-1) COLUMN 1a (C-1')

    Uploaded by

    andre villanueva
    The document describes the design of a column base plate for Column 1 (C-1) and Column 1a (C-1'). It provides the steel properties, loads, and calculations to determine the required base plate area, dimensions, bearing pressure, and plate thickness. For C-1, the design calls for a 700mm x 700mm base plate with a thickness of 40mm. For C-1a, the same size plate of 700mm x 700mm x 40mm thick is required.

    Copyright:

    © All Rights Reserved
    Download as RTF, PDF, TXT or read online from Scribd
    Download as rtf, pdf, or txt
    of 6

    CE 513

    DESIGN OF COLUMN BASE PLATE

    DESIGN OF COLUMN BASE PLATE

    COLUMN 1 (C-1)
    STEEL PROPERTIES:
    COLUMN 1a (C-1')
    STEEL PROPERTIES:
    W24 x 335
    kN W21 x 223
    m  steel  73.575
    g  9.807 3 kN
    2 m  steel  73.575m
    s g  9.807 3
    m2
    kg g kN s
    W B  499.35  4.897
    m m kg g kN
    W B  331.88  3.255
    m m
    2
    A T  63677mm
    2
    A T  42193mm
    d  699mm
    d  593.1mm
    t w  35.1mm
    t w  25.4mm
    t f  63mm
    t f  45.5mm
    b f  343.4mm
    b f  321.9mm

    A. General Data:
    Fy  250MPa

    fc  21MPa

    A.2. Span of the Column

    Lc  4000mm

    A.3. Column Load

    Grasp Results (Pu = 1.4DL + 1.7LL + 1.0E)

    Pu  3044.64k N

    X
    CE 513
    DESIGN OF COLUMN BASE PLATE

    B. Allowable Bending Stress on Concrete

    On the full area of a concrete support


    Fp  0.35fc

    Fp  7.35MPa

    B.1. Allowable Bending Stress on Steel

    Fb  0.75Fy

    Fb  187.5MPa

    B.2. Required Base Plate Area

    Pu
    A p 
    Fp

    2
    Ap  414236.735mm

    B.3 Dimension of the Plate Area

    N  Ap d  593.1mm

    N  643.612mm

    N  650mm

    ( N  0.95d )
    m 
    2

    m  43.277mm

    ( N  0.80d )
    n 
    2

    n  87.76mm

    L  n  87.76mm

    X
    CE 513
    DESIGN OF COLUMN BASE PLATE

    B.4 Actual Base Plate Area

    2
    A a  N

    2
    A a  422500mm

    C. Actual Bearing Pressure

    Pu
    fp 
    Aa

    fp  7.206MPa

    D. Plate Thickness

    2
    3fp  L
    t 
    Fb

    t  29.8mm

    t  30mm

    Therefore,
    Use 700mm x 700mm x 40mm thick Base Plate

    X
    CE 513
    DESIGN OF COLUMN BASE PLATE

    DESIGN OF COLUMN BASE PLATE

    COLUMN 1a (C-1')
    STEEL PROPERTIES:
    W21 x 223
    kN
    m  steel  73.575
    g  9.807 3
    2 m
    s
    kg g kN
    W B  331.88  3.255
    m m

    2
    A T  42193mm

    d  593.1mm

    t w  25.4mm

    t f  45.5mm

    b f  321.9mm

    A. General Data:
    Fy  250MPa

    fc  21MPa

    A.2. Span of the Column

    Lc  4000mm

    A.3. Column Load

    Grasp Results (Pu = 1.4DL + 1.7LL + 1.0E)

    Pu  3044.64k N

    X
    CE 513
    DESIGN OF COLUMN BASE PLATE

    B. Allowable Bending Stress on Concrete

    On the full area of a concrete support


    Fp  0.35fc

    Fp  7.35MPa

    B.1. Allowable Bending Stress on Steel

    Fb  0.75Fy

    Fb  187.5MPa

    B.2. Required Base Plate Area

    Pu
    A p 
    Fp

    2
    Ap  414236.735mm

    B.3 Dimension of the Plate Area

    N  Ap d  593.1mm

    N  643.612mm

    N  700mm

    ( N  0.95d )
    m 
    2

    m  68.277mm

    ( N  0.80d )
    n 
    2

    n  112.76mm

    L  n  112.76mm

    X
    CE 513
    DESIGN OF COLUMN BASE PLATE

    B.4 Actual Base Plate Area

    2
    A a  N

    2
    A a  490000mm

    C. Actual Bearing Pressure

    Pu
    fp 
    Aa

    fp  6.214MPa

    D. Plate Thickness

    2
    3fp  L
    t 
    Fb

    t  35.554mm

    t  40mm

    Therefore,
    Use 700mm x 700mm x 40mm thick Base Plate

    You might also like