Industrial Touch Panel PV Installation manual

Touch Panel

PanelVisa

A-1
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 PV035/PV037/PV057/PV058/GD057/GD058
PL035/PL037/PL057
Installation manual

Among the automation control devices, PanelVisa series is a high function but cost
effective Panel. Besides most basic functions, it supports drivers of most PLCs,
invertors and temperature controllers on the market. It is not only equipped with
standard compact plastic case, but also provides customized key types for users to
design their favorite ones. PanelVisa satisfies many kinds of design, such as
emergency buttons with various buttons. Thus, PV series can concur harsh
environments to meet customers’ needs and welcome by tool machines, specified
function machine designers.

A-2 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

PV035 Specifications

Items PV035-TST PV035-TNT

Color mode TFT LCD, Color mode TFT LCD,
Display Type
256 colors 256 colors
Display Size 3.5" (diagonal)
Number of Pixels 320X240
Display Adjustment X
Back Light LED; Life time is 100,000 hours
Touch Screen Yes Yes
Switch Key X X
Input Power 24VDC±10%; Isolation; Under 5W
CPU RISC ARM 32Bit CPU
Flash Memory 4M Bytes 4M Bytes
System working Memory 1M Bytes 2M Bytes
Battery Backed Memory 128K Bytes(Standard) ~1M Bytes
COM1/9pin Female: RS232/RS422/RS485;
Communication Ports
COM2; 4pin Plug Connector RS422/RS485
Ethernet Port X Yes
Extension Bus Port X X
Front Panel Seal IP65 / NEMA 4
Operating Temperature 0~50°C
Storage Temperature -20~60°C
Ambient Humidity 20-90% RH (non-condensing)
Vibration Endurance 0.5mm displacement, 10-55Hz, 30Min. per X, Y, and Z-axis directions
Shock Endurance 10G, 11ms three times in each direction of X, Y, and Z axes
RFI testing FCC Part15 Class A
Radiated Disturbance Test EN 55022/1998+A1:2000
Electrostatic Discharge Test EN61000-4-2/1995+A1:1998
RF Electromagnetic Field Test EN61000-4-3/1996+A1:1998
Surge Immunity Test EN61000-4-5/1995
EMC Test Report EN55022/EN55024/EN61000-3-2,3/EN61000-4-2,3,4,5,6,8,115
Net Weight 0.3Kg 0.3Kg
Cooling Natural cooling

A-3
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 PV037 Specifications

Items PV037-LSK PV037-LST PV037-LNT

Display Type Monochrome blue mode STN LCD, 16 gray levels

Display Size 3.7" (diagonal)

Number of Pixels 160x80
Display Adjustment Contrast adjustable with VR from the rear side
Back Light LED; Life time is 50,000 hours
Touch Screen X Yes Yes
Number of switches are
Switch Key X X
22 keys
Input Power 24VDC±10%; Isolation; Under 5W
CPU RISC ARM 32Bit CPU
Flash Memory 1M Bytes 2M Bytes
System working Memory 256K Bytes 512K Bytes
128K Bytes (Standard)
Battery Backed Memory Optional (from 128K Bytes~1M Bytes)
~1M Bytes
COM1/9pin Female: RS232/RS422/RS485;
Communication Ports
COM2; 4pin Plug Connector RS422/RS485
Ethernet Port X X Yes
Extension Bus Port Profibus (Options) X X
Front Panel Seal IP65 / NEMA 4
Operating Temperature 0~50°C
Storage Temperature -20~60°C
Ambient Humidity 20-90% RH (non-condensing)
Vibration Endurance 0.5mm displacement, 10-55Hz, 30Min. per X, Y, and Z-axis directions
Shock Endurance 10G, 11ms three times in each direction of X, Y, and Z axes
RFI testing FCC Part15 Class A
Radiated Disturbance Test EN 55022/1998+A1:2000
Electrostatic Discharge Test EN61000-4-2/1995+A1:1998
RF Electromagnetic Field Test EN61000-4-3/1996+A1:1998
Surge Immunity Test EN61000-4-5/1995
EMC Test Report EN55022/EN55024/EN61000-3-2,3/EN61000-4-2,3,4,5,6,8,115
Net Weight 0.30 Kg 0.32 0.32
Cooling Natural cooling

A-4 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

PV057 Specifications

Items PV057-LST PV057-BST PV057-TST

Monochrome blue mode STN LCD, Color mode TFT LCD,
Display Type
16 gray levels 256 colors
Display Size 5.7" (diagonal) 5.6" (diagonal)

Number of Pixels 320x240 320x234

Display Adjustment Contrast adjustable from touch screen
LED; Life time is CCFT; Life time is 20,000 hours under 25°C
Back Light
50,000 hours and 85%RH humidity
Analog resistive type; Max. Number of switches are 40x30
Chemically strengthened glass backing panel;
Touch Screen
Over 1 million point activations;
Hard coat is resistant to most solvents and chemicals
Input Power 24VDC±10%; Isolation; Under 10W
CPU RISC ARM 32Bit CPU
Flash Memory 4M Bytes
System working Memory 1M Bytes
Battery Backed Memory 128K(Standard)~1M Bytes

COM1/9pin: RS232/RS422/RS485
Communication Ports COM2/9pin: RS232 .
COM2/Terminal 4Pin : RS422/RS485 .

ProfiBus Port Optional with extension card

Front Panel Seal IP65 / NEMA 4
Operating Temperature 0~50°C
Storage Temperature -20~60°C
Ambient Humidity 20-90% RH (non-condensing)
0.5mm displacement, 10-55Hz, 2hours per X, Y, and Z-axis
Vibration Endurance
directions
Shock Endurance 10G, 11ms three times in each direction of X, Y, and Z axes
RFI testing FCC Part15 Class A
Radiated Disturbance Test EN 55022/1998+A1:2000
Electrostatic Discharge Test EN61000-4-2/1995+A1:1998
RF Electromagnetic Field Test EN61000-4-3/1996+A1:1998
Surge Immunity Test EN61000-4-5/1995
EMC Test Report EN55022/EN55024/EN61000-3-2,3/EN61000-4-2,3,4,5,6,8,115
Net Weight 0.85 Kg
Cooling Natural cooling

A-5
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 PV058/GD058 Specifications

Items PV058-TST PV058-TNT GD058-TST

Color mode TFT LCD,
Display Type
256 colors
Display Size 5.7" (diagonal)

Number of Pixels 320x240

Display Adjustment Brightness adjustable from touch screen
Back Light LED; Life time is 50,000 hours

Analog resistive type; Max. Number of switches are 40x30

Chemically strengthened glass backing panel;
Touch Screen
Over 1 million point activations;
Hard coat is resistant to most solvents and chemicals
Input Power 24VDC±10%; Isolation; Under 10W
CPU RISC ARM 32Bit CPU
Flash Memory 4M Bytes
System working Memory 1M Bytes 2M Bytes 1M Bytes
Battery Backed Memory 128K(Standard)~1M Bytes
COM1/9pin:
COM1/9pin: RS232/RS422/RS485 .
RS232/RS422/RS485
Communication Ports COM2/9pin: RS232 .
Com2/25pin:
COM2/Terminal 4Pin : RS422/RS485
RS232/RS422/RS485
ProfiBus Port Optional with extension card
Front Panel Seal IP65 / NEMA 4
Operating Temperature 0~50°C
Storage Temperature -20~60°C
Ambient Humidity 20-90% RH (non-condensing)
0.5mm displacement, 10-55Hz, 2hours per X, Y, and Z-axis
Vibration Endurance
directions
Shock Endurance 10G, 11ms three times in each direction of X, Y, and Z axes
RFI testing FCC Part15 Class A
Radiated Disturbance Test EN 55022/1998+A1:2000
Electrostatic Discharge Test EN61000-4-2/1995+A1:1998
RF Electromagnetic Field Test EN61000-4-3/1996+A1:1998
Surge Immunity Test EN61000-4-5/1995
EMC Test Report EN55022/EN55024/EN61000-3-2,3/EN61000-4-2,3,4,5,6,8,115
Net Weight 0.85 Kg
Cooling Natural cooling

A-6 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

PL035/PL037/PL057 Specifications

Items PL035-TST PL037-LST PL057-LST PL057-TST

Color mode TFT Monochrome blue mode STN LCD, Color mode TFT
Display Type
LCD, 256 colors 16 gray levels LCD, 256 colors
Display Size 3.5" (diagonal) 3.7" (diagonal) 5.7" (diagonal)
Number of Pixels 320x240 160x80 320x240
Brightness
Display Adjustment X Contrast adjustable with rear VR adjustable with
rear VR
Back Light LED; Life time is 50,000 hours
Touch Screen Yes Yes Yes
3.5" Touch Panel 3.7" Touch Panel 5.7" Touch Panel
Input Power 24VDC±10%; Isolation; Under 5W
CPU RISC ARM 32Bit CPU
Flash Memory 2M Bytes 1M Bytes 2M Bytes
System working Memory 512K Bytes 256K Bytes 512K Bytes
Battery Backed Memory x x
COM1/9pin Female : RS232;
Communication Ports
COM2; 4pin Terminal : RS422/RS485
Real Time Clock X(Optional) X(Optional) X(Optional) X(Optional)
Extension Bus Port X X X
Front Panel Seal IP65 / NEMA 4
Operating Temperature 0~50°C
Storage Temperature -20~60°C
Ambient Humidity 20-90% RH (non-condensing)
Vibration Endurance 0.5mm displacement, 10-55Hz, 30Min. per X, Y, and Z-axis directions
Shock Endurance 10G, 11ms three times in each direction of X, Y, and Z axes
RFI testing FCC Part15 Class A
Radiated Disturbance Test EN 55022/1998+A1:2000
Electrostatic Discharge Test EN61000-4-2/1995+A1:1998
RF Electromagnetic Field Test EN61000-4-3/1996+A1:1998
Surge Immunity Test EN61000-4-5/1995
EMC Test Report EN55022/EN55024/EN61000-3-2,3/EN61000-4-2,3,4,5,6,8,115
Net Weight 0.30 Kg 0.32 0.55
Cooling Natural cooling

A-7
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Outlet and Cut out dimensions

The outlet and cut out dimensions of PV037-LSK are shown as following.

The outlet and cut out dimensions of PL035-TST, PL037LST, PV037-LST/LNT &
PV035-TST/TNT are shown as following.

A-8 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

The outlet and cut out dimensions of PV057-LST/BST/TST & PV058-TST/TNT are
shown as following.

The outlet and cut out dimensions of PL057-LST & PL057-TST are shown as following.

cut out

A-9
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 The outlet and cut out dimensions of GD057-LST/GD058-TST are shown as following.

Installation

Before setup HMI, please cut a hole according to the cutout dimension.
Please see below pictures for your installation reference.

PL035-TST
118.5mmx92.5mm

PL037-LST
118.5mmx92.5mm

A-10 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

PV037-LSK
159.5mmx88.5mm

PV037V-LSK
88.5mmx159.5mm

PL057-LST
PL057-TST

PV057-LST
PV057-BST
PV057-TST
PV058-TST/TNT
174.5mmx132.5mm

GD057-LST
GD058-TST
191.5mmx142.0mm

How to install the HMI?

Put the HMI to the cut hole and sew the lock screws at the four assembling holes on
the HMI with average strength form the rear side. Please do not sew too tight and
without equational strength or it will damage the touch panel.

A-11
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 The operation of the Key Panel and Touch Panel

PV037-LSK, a kind of key panel equipped with a 3.7” 160(H) x80(V) resolution LCD
display, a 22 keys membrane, allows users to design various applications. If the touch
panel is not fixed in a right position, set the DIP-SW1, SW2 and SW3 to off to execute
the touch panel adjustment. Please adjust it while needed and do not do the
unnecessary adjustment.

The Key panel PV037-LSK, is equipped with 22 keys on the membrane. Those keys
are some for numeric entry and some for programmable function keys. There are four
function keys, which can be assigned with various functions in any screen from the
software. The other 0-9 ten keys on the membrane provide numerical entering function.
They can also be locked temporarily. Press ESC and ENT at the same time to lock the
ten keys. To unlock, press ESC and ENT again. For double-key’s application, users can
operate to press together ESC and F1~F4 to act as a programmable function keys. The
Panel will automatically judge the data format or up/down settings to complete the data
input.

PL035-TST/PL037-LST/PV035-TST/PV037-LST, a kind of touch panel equipped with a

3.5” 320(H) x240(V) or 3.7” 160(H) x80(V)resolution LCD display, an analog input touch
panel, allows users to design various applications. If the touch panel is not fixed in a
right position, press the touch panel glass while power on and entry BIOS screen. You
can select “Touch Panel” option to execute the touch panel adjustment function. Please
adjust it while needed and do not do the unnecessary adjustment.

PL057-LST/PL057-TST/PV057/PV058/GD057/GD058 is a kind of touch panel

equipped with a 5.7”, 320(H)x240(V) size LCD display and an analog input touch panel.
It accepts to have maximum 40x30 touch buttons in a screen. The shapes of touch
keys should be rectangles with sizes from minimum 8(H) x8(V) pixels to maximum
320(H) x240(V) pixels.

A-12 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

Features

1. High Quality Control and 100% Product Test.

2. Provides customized option keys design, 34pin Connector, 8x4=32 matrix keys and 8
individual function keys. There are 40 keys in total.
3. Built-in Fanless, Reliable and High Function RISC 32-bits CPU.
4. Provides long life LED backlight / Color TFT LCD.
5. Provides 128KB ~1 MB battery backup memory for Alarm、Recipe、Data Recording
Using.(Options)
6. Supports Multi-Languages、Unicode & BMP、JPG、GIF graphic formats.
7. Provides accommodative Software, “PanelMaster”.
8. Customize Logo / Membrane Design and BIOS for users.

PV037/PV057/PV058/GD057/GD058 is a compact HMI with BIOS password protected

function. This special function can be used to prevent the inside application data from
being stolen or destroyed. The BIOS password is not set as a default situation.
With BIOS upgrade function, wherever in the world, whenever the HMI needs to be
updated new functions, this function supports upgrading without sending back to the
factory.
With serial number in the BIOS as an ID number of the HMI. Supports checking the
serial number from the HMI to assure a complete after service.
The unique two BIOS system patent design. In our past experiences, the HMI will not
be able to run normally or even not be turned on the system due to the unstable
electricity during operating. With the two BIOS system, customers need not send the
damaged HMI back to the factory.
Customize logos and User ID codes are available. Even for the small amount industrial
products, this function let the customers have their own operating panel to complete an
integer design.
Automatically data download and communication port COM1 or COM2 detection. No
need to setup.
With BIOS recovery system while missing password to prevent system blocking due to
missing password.

A-13
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 DIP switches setting
PV037-LSK/PV057/PV058 DIP Switches setting

SW1 System Menu

ON Not dis play s ys tem m enu, go to ON-LINE c om m unic ation after
turns on.
OFF Dis play s ys tem m enu when turns on. Not go to ON-LINE
c om m unic ation.

SW2 Em ergenc y rec overy the HMI BIOS to default value.

ON Set to default OS vers ion or c us tom ized OS vers ion.
OFF Set to default BIOS vers ion B.

SW3 SW4 HMI operation mode (Supports special functions for customized BIOS
version)
OFF OFF Res erved
ON OFF To exec ute HMI Com m unic ation tes ting program (SW 1,2 m us t
s et to Off)
OFF ON To exec ute Key adjus tm ent program or Touc h adjus tm ent
program (SW 1,2 m us t s et to Off)
ON ON To exec ute HMI applic ation program

SW5 Res erved

ON Res erved
OFF Res erved

SW6 Res erved

ON Res erved
OFF Res erved

1 2 3 4 5 6

***The PV037/PV057 has a BIOS password recovery system to prevent damage when
missing password. When you forget the password, which has been set to the HMI, this
HMI can execute RUN AP/Calibrate operation but cannot execute BIOS/Download
AP/Clear SRAM operations. When the users want to download new AP without
password, please set all DIP switches to off (SW1-6=Off), When turns on HMI again,
the HMI will display the clean all AP and old password screen. After proceeding this
procedure, the HMI can be operated normally again.

For some models of the PL037-LSK/PL037-LST/PV037-LNT/PL035-TST/PV035-

TST/PV035-TNT/GD057-LST/GD058-TST there are no dip switch.

A-14 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

Startup test
When turns on HMI, it will display self-testing screen. After completed, HMI will show
the system menu.

FigureA-1 When there are checksum errors, that could be RTC data missing, battery
failed or AP not being well downloaded.

FigureA-2 The HMI startup self-testing _power on

**When turns on HMI, system will automatically execute hardware testing first to make
sure hardware are normal or not. The result will show on the screen (Figure A-1/A-2). If
there are problems, the HMI will not communicate with P.L.C. normally.
When losing electricity during downloading or the PC breaks off downloading, after
restarting the HMI, it will show Firmware Memory Checksum and Application Memory
Checksum error. It means there is an abnormal downloading. To get a correct self-
testing result, please execute a correct download AP procedure again.
If losing electricity during downloading or the PC breaks off downloading when
upgrading OS, it will surely cause download failure. If you restart the HMI, it will not
display normal screens or even cannot be turned on. In that case, please set the DIP
SW2 to OFF, restart the HMI to get a default BIOS version B then execute the
upgrading OS program to get a correct OS version. Set the DIP SW2 to ON then the
HMI can be turned on normally.

A-15
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Startup menu

DIP-SW Model:
If the DIP SW1 set to off, after self-testing the PV037/PV057 will show startup menu as
following figures.
The Startup menu of PV037-LSK is shown as below.
Situation 1: When SW2=OFF, it will show the default BIOS Ver. B.

Situation 2:When SW2=ON, it will show the Panel Setup screen or customized Version
screen.

The startup menu of PV057 is shown below.

Situation 1: When SW2=OFF, it will show the default BIOS Ver. B.

Situation 2: When SW2=ON, it will show the Panel Setup screen or customized version
screen.

A-16 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

No DIP-SW Model:
The Startup mode setting of the “No DIP-SW Models” is shown as below.
Situation 1: When power on, the user press the upper-left position of the touch screen
till the HMI has a beep sound.

Situation 2: It will enter BIOS mode and then you can adjust the startup mode is the
“Panel Setup” or “Run AP” screen.

Panel Setup Mode Run AP Mode

Situation 3: If the startup mode is “Run AP”, the user can use below method to enter
“Panel Setup” screen while HMI starting.
When power on, the user press the upper-right position of the touch screen
till the HMI has a beep sound. It will enter “Panel Setup” mode directly.

A-17
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 System menu Descriptions Password
Update OS To receive new AP OS Ver. from COM Port. Yes*1
Copy AP To Copy AP to another HMI from COM1/2. Yes*1
Clear SRAM Clear battery backup data memory. Yes*1
Run AP Press “Run AP” or “ENT” to communicate with P.L.C.. None*2
Setting HMI keys and hardware functions testing. None
LCD Test Check HMI LCD Display None
Exit Press “ESC” to return HMI hardware self testing None
*1.If sets a BIOS protection password to HMI, then the HMI will request the users to
enter BIOS password.
*2. If sets a login user password in AP, when selects Run AP, it will request the user to
enter BIOS password.

A-18 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

Download AP

To download AP to HMI, please make sure the download cable is connected properly.
During the operating or in startup menu the HMI is ready to receive AP data sent by PC
automatically. When download AP the SW2=ON.

FigureA-3 The HMI downloading data from PC screens

1. Connect the PC COM1 or Com2 and HMI with a PC download cable.

HMI Connector PC RS232C HMI Connector PC Connector

9-pin Female --------- 9-pin Female 9-pin Male ---------- 9-pin Female

HMI COM2 ---- PC COM HMI COM1 ------ PC COM

Serious Caution: Be sure turn off the power before connecting or it will damage the HMI
communication components.

2. The HMI will judge the data correctness during downloading AP.
When the PC sends AP data to HMI, the HMI will show download AP screen and
display related information automatically to receive data. The HMI will show ”Incorrect
Model !” when the Model No. is not set correctly in the AP data. Please select a correct
Model No. from the software then download it again. If the HMI shows ”Incorrect User
ID Code !!”, then the hardware and software might not fit each other. Please check the
brand name of the HMI to make sure you purchased a right hardware.

A-19
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 COM ports define

The communication port COM1 of PV037/PV057/PV058 can use as RS232C、RS422

and RS485 while COM2 as RS422 and RS485. The COM2 of PV057/PV058/GD058
can use as RS232, RS422 and RS485. Please make the right connecting cable
according to the specifications. About the cable connecting figures of the HMI to other
P.L.C., please refer to the P.L.C. manuals.
Communication port COM1 in HMI is a DB-9P Female.
COM1： pin definitions
Pin Function Pin Function
1 RS-422 TX+ and RS-485 + 6 RS-422 TX- and RS-485 -
2 RS-232 RXD 7 RS-232 RTS
3 RS-232 TXD 8 RS-232 CTS
4 RS-422 RX+ 9 RS-422 RX-
5 Signal ground

COM2： 4-pin terminal.

RS422 and RS485。

COM2： pin definitions (Only PV057/PV058 series support is a DB-9P male)

Pin Function Pin Function
1 RS-485 + 6 RS-485 -
2 RS-232 RXD 7 RS-232 RTS
3 RS-232 TXD 8 RS-232 CTS
4 9 Optional 5V output
5 Signal ground

COM2： pin definitions (Only GD057/GD058 series support is a DB-25P female)

Pin Function Pin Function
1 Chassis ground 14 RS-422 TXD+ and RS-485 +
2 RS-232 TXD 15 RS-422 TXD- and RS-485 -
3 RS-232 RXD 16 RS-422 RXD+
4 RS-232 RTS 17 RS-422 RXD-
5 RS-232 CTS 18 (no function)
6 (no function) 19 (no function)
7 Signal ground 20 (no function)
8* (no function) 21
9 (no function) 22
10 (no function) 23 RS-422 RTS+
11 (no function) 24 RS-422 RTS-
12 RS-422 CTS+ 25* (no function)
13 RS-422 CTS-

Extension Bus Port (It’s an Optional device) this port can link with other extension
modules for advanced functions.

A-20 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

LCD adjustment

PV037-LST/PV035-TS(N)T/PV057-LST/PV058-TS(N)T/GD058-TST (LED B.L.)

To adjust the LCD contrast, please adjust the LCD adjusting knob from the PV037 rear
side. The PV037 is equipped with high luminance LED backlight, so adjusting the LCD
brightness is not necessary.
The PV035 is equipped with high luminance LED backlight and wide TFT LCD, so
adjusting the LCD brightness & contrast are not necessary.

PV057-BST/PV057-TST (CCFL B.L.)

To adjust the PV057 LCD brightness, (Blue mode STN/Color STN LCD, TFT model can
not be adjusted the brightness), press [General] from PV057 Panel Setup screen or
press [LCD Testing] from [Settings] in BIOS B. From [LCD Brightness], press [Increase
Brightness] to increase the brightness, press [Decrease Brightness] to decrease
brightness, press [Save Brightness] to save. Press [OK] to return to system screen.

Figure A-4 PV057 Panel Setup screen_ LCD brightness adjustment

A-21
PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Power and grounding specifications

Use DC24V as PV037 power input. The power consumptions are as following table. To
ensure the PV037/PV057 hardware working properly, to avoid outside
electromagnetism noise, please ground the power source properly.

Items PV037-LSK PV035-TST PV057-BST PV057-TST

PV058-TNT
PV037-LST PV035-TNT PV057-LST PV058-TST
Models GD058-TNT
PL037-LST PL035-TST PL057-LST PL057-TST
Power
24VDC±10%; 6W 24VDC±10%; 10W
consumption
Fuse Rating 0.5A 0.8A

Power grounding caution: The products are all equipped with power terminals and lock
assembling sets. The operating procedure is:
１．Screw off the power terminal.
２．Peel the 24V wiring(1.25mm) for 1 cm then plug in the power terminal.
３．Use line screw driver to screw the power terminal tight.

Package content
We are appreciated for your purchasing our products. Our standard package should be
equipped with 5 items as following. Please check after receiving it. If there’s any
shortage, please refer to the suppliers.

PV035/037/057/058/GD057/GD058; PL035/PL037/PL057 unit x 1 (HMI Hardware)

Power terminal x 1 (power terminal)

Communication terminal x 1 (4-pin communication connector)

Installation screw nuts x 4 (Lock for assemble with screws)

PV037/PV057/PV058/GD058 Installation Guide x 1 (Installation manual)

Cautions
If this product is used in a house, radio-wave interference might occur to other devices.
In the case that it does occur, the user is requested to try a variety of remedies to solve
the problem.

A-22 PanelVisa

Downloaded from www.Manualslib.com manuals search engine

 Industrial Touch Panel PV Installation manual

Power source

PV037/PV057 is equipped with DC24V input power. If the supply power is other than
DC24V, whatever less or excess, it will severely damage the HMI. Therefore, check
the switching power supply supporting the DC power regularly.

To avoid electronic shock, be sure the Power Cable is unplugged from the power
outlet when connecting the cable to the HMI.

Grounding

From the FG terminal at the rear side of HMI, please make sure the grounding is
made exclusively.

When the FG terminal is connect, be sure the wire is grounded. Without grounding,
the operation of HMI may be severely affected by excess external noise levels and
vibrations.

Use a cable at 2 m㎡ (AWG 14) to ground the equipment. Ground resistance must
be less than 100Ω(class3).Note that the ground cable must not be connected to the
same ground point as the power circuit.

Installation
Mount the HMI from the front of a suitable preserved hole.

Attached the brackets behind.

Fasten the screw of the brackets with proper force. Tightening too much may cause
damage to the structure of the unit.

Input and Output signal lines must be separated from the power cables for
operational circuits. Use shielded cables or it may cause unpredictable problems.

Do not allow cut wires, filling, or shavings to fall inside a unit or block when drilling
holes or connecting cables/lines.

Environment

Do not install in areas subject to excessive dust, oily mist, conductive dust, corrosive
gas, or flammable gas.

Do not mount in areas subject to shock or vibration.

Do not mount in areas subject to high temperature, moisture, or rain.
Indicated loss of life, severe personal injury, or substantial property damage will result
if proper precautions are not taken.

A-23
PanelVisa

Downloaded from www.Manualslib.com manuals search engine