Scribd
Upload
20 views

#Include #Define Datapin 8 // Defines Pin Number To Which The Sensor Is Connected

This Arduino code tutorial teaches how to read temperature and humidity values from a DHT11/DHT22 sensor using a library. It includes code to define the data pin connected to the sensor, read the sensor values, and print the temperature and humidity to the serial monitor every 2 seconds.

Uploaded by

Dwi Prayoga
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
20 views

#Include #Define Datapin 8 // Defines Pin Number To Which The Sensor Is Connected

This Arduino code tutorial teaches how to read temperature and humidity values from a DHT11/DHT22 sensor using a library. It includes code to define the data pin connected to the sensor, read the sensor values, and print the temperature and humidity to the serial monitor every 2 seconds.

Uploaded by

Dwi Prayoga
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

1.

/* DHT11/ DHT22 Sensor Temperature and Humidity Tutorial


2. * Program made by Dejan Nedelkovski,
3. * www.HowToMechatronics.com
4. */
5. /*
6. * You can find the DHT Library from Arduino official website
7. * https://playground.arduino.cc/Main/DHTLib
8. */
9.
10. #include <dht.h>
11.
12. #define dataPin 8 // Defines pin number to which the sensor is connected
13. dht DHT; // Creats a DHT object
14.
15. void setup() {
16. Serial.begin(9600);
17. }
18. void loop() {
19. int readData = DHT.read22(dataPin); // Reads the data from the sensor
20. float t = DHT.temperature; // Gets the values of the temperature
21. float h = DHT.humidity; // Gets the values of the humidity
22.
23. // Printing the results on the serial monitor
24. Serial.print("Temperature = ");
25. Serial.print(t);
26. Serial.print(" *C ");
27. Serial.print(" Humidity = ");
28. Serial.print(h);
29. Serial.println(" % ");
30.
31. delay(2000); // Delays 2 secods, as the DHT22 sampling rate is 0.5Hz
32. }
1. /* DHT11/ DHT22 Sensor Temperature and Humidity Tutorial
2. * Program made by Dejan Nedelkovski,
3. * www.HowToMechatronics.com
4. */
5. /*
6. * You can find the DHT Library from Arduino official website
7. * https://playground.arduino.cc/Main/DHTLib
8. */
9.
10. #include <dht.h>
11.
12. #define dataPin 8 // Defines pin number to which the sensor is connected
13. dht DHT; // Creats a DHT object
14.
15. void setup() {
16. Serial.begin(9600);
17. }
18. void loop() {
19. int readData = DHT.read22(dataPin); // Reads the data from the sensor
20. float t = DHT.temperature; // Gets the values of the temperature
21. float h = DHT.humidity; // Gets the values of the humidity
22.
23. // Printing the results on the serial monitor
24. Serial.print("Temperature = ");
25. Serial.print(t);
26. Serial.print(" *C ");
27. Serial.print(" Humidity = ");
28. Serial.print(h);
29. Serial.println(" % ");
30.
31. delay(2000); // Delays 2 secods, as the DHT22 sampling rate is 0.5Hz
32. }

You might also like