0% found this document useful (0 votes)
539 views60 pages

1 Introduction PDF

The document discusses CAD/CAM/CIM. It covers key topics like elements of interactive computer graphics, geometric modeling, transformation and data storage techniques, NC/CNC technology, group technology, CAPP, and CIM. It also discusses reference books on CAD/CAM/CIM and provides details about the syllabus, internal assessment, and term work for the CAD/CAM/CIM course.

Uploaded by

Anmol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
539 views60 pages

1 Introduction PDF

The document discusses CAD/CAM/CIM. It covers key topics like elements of interactive computer graphics, geometric modeling, transformation and data storage techniques, NC/CNC technology, group technology, CAPP, and CIM. It also discusses reference books on CAD/CAM/CIM and provides details about the syllabus, internal assessment, and term work for the CAD/CAM/CIM course.

Uploaded by

Anmol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 60

CAD/ CAM/ CIM

• Elements of Interactive Computer Graphics.


1

• Techniques for geometric Modeling


2

• Transformation, Manipulation and Data Storage


3

4
• NC and CNC Technology

5 • Group Technology, CAPP and CAQC

6 • CIM and Technology driven practices

23/12/2019 Prof. Neepa M. Patel, MPSTME. 1


Reference Books
 CAD/CAM Computer Aided Design & Manufacturing,

-M. P. Groover & E. W. Zimmers (PHI Publications)

 CAD/CAM Theory and Practice (2009),

-Ibrahim Zaid & R. Sivasubramanian (McGraw Hill)

 CAD/CAM Principles and Applications (2010),

-P. N. Rao (McGraw Hill)

23/12/2019 Prof. Neepa M. Patel, MPSTME. 2


Reference Books
 CAD/CAM/CIM
By Radhakrishan, S. subramanyan, V.Raju.

 CAD/CAM & Automation


By Farazdak Haideri.
CAD/CAM
By Mikell P. Groover ,Emory W. Zimmers
Computer Graphics
By A.P. Godse ,D. A. Godse

23/12/2019 Prof. Neepa M. Patel, MPSTME. 3


CAD/CAM/CIM
Total marks
100 Marks

Theory paper
70 Marks

Internal Assessment
50 marks scaled in 30 marks

23/12/2019 Prof. Neepa M. Patel, MPSTME. 4


Internal assessment 50 marks
( scaled in 30 marks)
M-1 + M-2
Term work

Practical
20 marks
10 marks

Quiz
20 marks
23/12/2019 Prof. Neepa M. Patel, MPSTME. 5
M-1+2+3 Test Syllabus (15 marks)

M-1 : Unit no. 1 & 3

M-2 : Unit no. 4 & 5

23/12/2019 Prof. Neepa M. Patel, MPSTME. 6


Term Work (30 marks)

Quiz : 20 marks
(from all units)

Practical :10 marks.


3D model in SOLIDWORKS

23/12/2019 Prof. Neepa M. Patel, MPSTME. 7


Chapter 1

“Elements of Interactive Computer


Graphics”

23/12/2019 Prof. Neepa M. Patel, MPSTME. 8


Things to be learned…
Introduction of CAD/CAM/CIM

Major activities covered under CAD/CAM/CIM

Conventional Product Life Cycle

Product Life Cycle with CAD/CAM

The Design Process

Sequential Engineering, Concurrent


Engineering and Collaborative Engineering.

CAD System Architecture

23/12/2019 Prof. Neepa M. Patel, MPSTME. 9


CAD / CAM
 CAD / CAM:- It is the technology concerned with
the use of computers to perform design and
manufacturing functions.
 CAD:- If computer system is used in design to
assit,modification,synthesis,analysis and
optimization, then it is called as CAD.
 CAM:-If computer system is used in
manufacturing the product like,
planning process, manage and control the
manufacturing operations, Tool selection
and procurement, Inspection & Quality
Control, then it is called as CAM.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 10


Computer-Aided Design (CAD)
 Use of computer systems to assist in
the creation, modification, analysis,
and optimization of a design
 Typical tools:
 Tolerance analysis

 Mass property calculations

 Finite-element modeling and

visualization
 Defines the geometry of the design

23/12/2019 Prof. Neepa M. Patel, MPSTME. 11


Computer-Aided Manufacturing (CAM)
 Use of computer systems to plan,
manage, and control manufacturing
operations

 Direct or indirect computer interface


with the plant’s production resources

 Numerical control of machine tools

 Programming of robots

23/12/2019 Prof. Neepa M. Patel, MPSTME. 12


Computer-Aided Engineering (CAE)
 Use of computer systems to
analyze CAD geometry

 Allows designer to simulate


and study how the product will
behave, allowing for
optimization

 Finite-element method (FEM)


 Divides model into
interconnected elements
 Solves continuous field
problems

23/12/2019 Prof. Neepa M. Patel, MPSTME. 13


CAD

CAM CAE

23/12/2019 Prof. Neepa M. Patel, MPSTME. 14


Need for CAD/CAM
 To increase productivity of the designer
 To improve quality of the design
 To improve communication between departments
 To create a manufacturing database
 To create and test tool-paths and optimize them
 To help in production scheduling and MRP
models
 To have effective shop floor control

23/12/2019 Prof. Neepa M. Patel, MPSTME. 15


CAD System Architecture
Major component of CAD Architecture is hardware and
software to manipulate the shape of component.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 16


Hardware used in CAD

1.)CAD workstation
 Display device : CRT,LCD,LED

 Input device : Keyboard, mouse, track ball,


scanners, joy stick etc.
2.)Output device
 Printer : Dot Matrix Printer,Inkjet Printer,Laser
Printer,3D Printer m/c.
 Plotter: Drum Plotter, Flat-bed Plotter.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 17


Hardware used in CAD
3.)CPU :
 Control Unit : directs the various parts of the
computer i.e. storage devices, display
devices, input/output devices to do
their job.
 Arithmetic and Logical Unit : performs all
arithmetic operations and logical
operations such as comparison as
per the program instructions.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 18


Hardware used in CAD
4.) Storage Devices:
 Primary Storage Device :

ROM- Read Only Memory


RAM- Random Access Memory
 Secondary Storage Device :

stores the information for long time which


can be change as and when required for
examples,hard disk,pen drives, CD,DVDs
ect.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 19


Software used in CAD
 Modeling Software: AutoCAD, PRO-E,SOLID-
EDGES,SOLID-WORKS,CATIA etc.

 Analysis Software: ANSYS,NASTRAN, FEA,


CFD, Fluent, etc.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 20


Hardware And Software used in
CAM
 Hardware :
• Robots, CNC,NC,DNC m/c,
• Material Handling equipments,
• Automated Guided Vehicles, AS/RS, etc..
 Software :
• Part Programming, CAPP,CAM WORKS,
• SMARTCAM, EDGECAM, MASTERCAM,etc.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 21


Major activities covered under
CAD/CAM/CIM
 1.) CAD:
• Computer Aided Design
• Computer Aided Drafting & Documentation.
• Geometric Modeling
• Engineering Analysis
• Simulation
 2.) CAM :
• CAM Planning and Control,
• Production Planning
• CAPP, CAQC, Master Scheduling,
• Material Requirement Planning
• Material Resource Planning
• Inventory Management

23/12/2019 Prof. Neepa M. Patel, MPSTME. 22


Major activities covered under
CAD/CAM/CIM
 3.) Business Functions:
• Purchase
• Stores
• Cost planning & Control,
• Marketing and Sales,
• Packaging and Forwarding,
• Finance and Accounts,
• Plant Maintenance,
• Human Resources and Developments
 So CIM is a combination of these 3 islands CAD,CAM, Business
Functions, which increases,
• Productivity,
• Plant efficiency and Product Quality.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 23


Definition of CIM

Computer
Aided
Design

CIM
Computer
Business
Aided
functions
Manufacturing

23/12/2019 Prof. Neepa M. Patel, MPSTME. 24


Advantages of CAD/CAM systems
 Greater flexibility.
 Reduced lead times.
 Reduced inventories.
 Increased Productivity & quality.
 Improved customer service.
 Improved communications
 Better product design.
 Greater Mfg. control.
 Reduced costs.
 Increased utilization.
 Reduction of machine tools.
 Less floor space.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 25


Limitations of CAD/CAM systems

 The cost of Hardware and Software used in


CAD/CAM is very high,

 Required highly trained manpower to operate


the computer system.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 26


Production–Consumption Cycle

1. Production
2. Distribution
3. Consumption
4. Recovery or
disposal

Prof. Neepa M. Patel, MPSTME, Mumbai

23-12-2019 27
23-12-2019 Prof. Neepa M. Patel, MPSTME, Mumbai 28
The phases of the PLC

 Product development
 Introduction or
launch of the product
into the market,
 Growth,
 Maturity
 Decline.

Prof. Neepa M. Patel, MPSTME, Mumbai

23-12-2019 29
Traditional/Convectional Product life cycle
Product Design Drafting &
concept Documentation

Customer Tool design


Feedback &Procurement Process
Planning
Material
Marketing Procurement

Quality Final Production


Control Product Planning

23/12/2019 Prof. Neepa M. Patel, MPSTME. 30


Product life cycle with CAD/CAM
Geometric FEA Simulation
modeling

Product CAD Computer Aided


Concept Drafting &
Computer Documentation
Aided
Feedback
CA tool CA
Marketing Design and Process
Procurement Planning

CA Quality Final CA Production


Control Production Planning

CNC,DNC m/c, Robots, AGVs, etc.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 31


Field warranty
Quality service
Market control
analysis,
Production
R&D
Process system
design
Prototyping

Statistic
Process
Engineering Product Control (SPC)
Modeling design Cell, Quick
Response
Manufacturing
Rapid
Prototyping
Computer
Aided
Manufacturing
Computer (CAM)
Aided Design
(CAD)

Manufacturing in the Product Life Cycle

23/12/2019 Prof. Neepa M. Patel, MPSTME. 32


General Design Process
The general design process consist of six steps-

1. Recognition of Need

2. Definition of Problem

3. Synthesis

4. Analysis and Optimization

5. Evaluation

6. Presentation

23/12/2019 Prof. Neepa M. Patel, MPSTME. 33


Need
Recognition

Problem
Definition

Synthesis

Analysis and
General Design
Optimization
Process

Evaluation

Presentation

23/12/2019 Prof. Neepa M. Patel, MPSTME. 34


General
Design
Process
CAD

Geometric
Modeling

Engineering
Analysis

Evalution
Analysis

Automated
Drafting

23/12/2019 Prof. Neepa M. Patel, MPSTME. 35


Example

23/12/2019 Prof. Neepa M. Patel, MPSTME. 36


General Design Process with CAD
1) Recognition of need
Every design process starts with the
recognition of need. It is outcome of either the
requirement or the discontent with the existing system.
Computer system doesn’t play any role in this phase.
2.) Definition of problem
After identifying the need, the problem is
more specified in this phase i.e.it includes all the input
parameters, functional requirements &constrains of the
system.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 37


General Design Process with CAD
3.) Synthesis
It is the process of selecting the mechanism of
the system, materials, sizes and shapes of the components
so as to get the desired output with the given input. In a
CAD, the geometric modeling is used to assist the
synthesis.
4.) Analysis and Optimization
Every Synthesis must be followed by
analysis. Analysis is critically examining an already existing
or proposed design in order to judge its suitability for the
task. All possible solutions are analyzed and Optimum one
is selected. In CAD, analysis software are stress-strain
analysis, kinematic analysis, dynamic analysis, vibration
analysis etc.
23/12/2019 Prof. Neepa M. Patel, MPSTME. 38
General Design Process with CAD
5.) Evaluation
It is measuring the design against the
specification set in the definition of problem. In a CAD,
evaluation is done by using simulation software
6.) Presentation
It is the final phase in the design process.
The design is presented by means of drawing, part list
material specification, etc.
With the help of CAD software, the
different sectional views can be automatically created.
The CAD also generates the information like: parts list,
material specifications etc.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 39


Need
Computers for
Recognition
Design Process
Problem
Definition

Geometric
Synthesis
Modelling

Analysis and Engineering


Optimization Analysis

Design Review
Evaluation
and Evaluation

Automated
Presentation
Drafting

23/12/2019 Prof. Neepa M. Patel, MPSTME. 40


CAD Tools Required to Support the Design Process
(Extra)
Design phase Required CAD tools
Geometric modeling techniques;
Design conceptualization Graphics aids; manipulations; and
visualization
Same as above; animation;
Design modeling and simulation assemblies; special modeling
packages.
Analysis packages; customized
Design analysis
programs and packages.
Customized applications; structural
Design optimization
optimization.

Design evaluation Dimensioning; tolerances; BOM; NC.

Design communication,
Drafting and detailing…
documentation and Presentation

23/12/2019 Prof. Neepa M. Patel, MPSTME. 41


CAM Tools Required to
Support the Design Process(Extra)

Manufacturing phase Required CAM tools

CAPP techniques; cost


Process planning analysis; material and tooling
specification.

Part programming NC programming

Inspection CAQ and Inspection software

Robotics simulation and


Assembly
programming

23/12/2019 Prof. Neepa M. Patel, MPSTME. 42


Sequential Engineering

Design Process Manufacturi Quality Marketing


Planning ng Control

23/12/2019 Prof. Neepa M. Patel, MPSTME. 43


Concurrent Engineering

23/12/2019 Prof. Neepa M. Patel, MPSTME. 44


Design Process- Traditional
 “Over the wall approach”

 Communication barriers are as high as the


wall

Traditional Process = Linear


Vs
Concurrent Engineering = Team collaboration

23/12/2019 Prof. Neepa M. Patel, MPSTME. 45


23/12/2019 Prof. Neepa M. Patel, MPSTME. 46
23/12/2019 Prof. Neepa M. Patel, MPSTME. 47
Concurrent Engineering
 It is a methodology of restructuring the
product development activity in an
organization by adopted a technique which
improve the efficiency of product design and
reduce the product design cycle time.

 Replaces a traditional ‘over-the-wall’


approach where one group does their part &
then hands off the design to the next group

23/12/2019 Prof. Neepa M. Patel, MPSTME. 48


Why Concurrent Engineering?

 In Concurrent Engineering, all representatives from R&D,


Engineering,Manufacturing,materials-management,quality
assurance,marketing etc. develop the product as a team.

 Everyone interacts with each other from the start, and they
perform their task in parallel. It is flexible for any changes.

 The teamwork brings additional advantages like FMEA

(Failure Mode & Effect Analysis) which help to detect the


possible faults in product and production planning.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 49


Why Concurrent Engineering?
 The need for shorter product life cycle.

 Large organizations with several departments working on


developing numerous products at the same time.

 New and innovative technologies emerging at a very high


rate, thus causing the new product to be technological
obsolete within a short period.

 Changing are done in a quickly way so it reduces product


cost and product development time.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 50


Concurrent Engineering Benefits
 Following improvements to specific product lines
are done by the applications of concurrent
engineering :
1. Development and production lead times

2. Measurable quality improvements

3. Engineering process improvements

4. Product development cost is reduced

5. It is flexible for any changes.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 51


Collaborative Engineering
 World Wide Web and Internet have brought significant
changes in Engineering Design and Manufacturing
activities.

 Now it is possible for different teams to work together on


diverse platforms in geographically distributed locations
to complete a product design and development
effectively.

 Like concurrent engineering all departments interacts


with each other from the start, and they perform their
task in parallel. It is flexible for any changes.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 52


Collaborative Engineering
Example:
 There are 2 product design teams one at New
York and another one is at Bangalore.
 A part of design is carried out in New York ,at
the end of the day the files are transferred to
Bangalore where the design people will have
just started the day’s work. They can continue
the work ,and at the end of the day they transfer
the data to New York.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 53


Collaborative Engineering
Cloud Computing

23/12/2019 Prof. Neepa M. Patel, MPSTME. 54


Collaborative Engineering Benefits
 Representatives from the different groups can
better consider trade-offs in cost & design choices
as each decision is being made

 Development time is reduced due to less rework


(traditionally, groups would argue with earlier
decisions & try to get them changed)

 Emphasis is on problem-solving (not placing blame


on the ‘other group’ for mistakes)

23/12/2019 Prof. Neepa M. Patel, MPSTME. 55


Benefits of using CAD Software

 Increase in the productivity of the designer.

 Improve the quality of the design.

 Better communications.

 Creating documentation of the designing.

 Creating the database for manufacturing.

 Saving of design data and drawings.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 56


University Questions
 Explain CAD System architecture in brief.

 Write a short note - Design process with CAD/CAM.

 Explain the advantages of CAD/CAM application to concurrent engineering. OR

With the help of neat diagram explain the concurrent engineering. OR

Explain the role of concurrent engineering in Product design and development. OR

How concurrent engineering can help to reduce product development time ?

 Write a short note on – CAD/CAM/CIM.


 Discuss how internet is an enabling tool for collaborative product
development. OR Write a short note on Collaborative Engineering.
 Product life cycle in CAD/ CAM environment.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 57


University Questions
 State five CAD packages available in market.
 List down the fields in which CAD/CAM can be used. Explain
how it is useful in these fields.
 Describe briefly about various CAD Hardware.
 Define Briefly about Design process with flow chart.
 What are the benefits of CAD in design. Explain with examples
along with its use in each step of the design process
 Enlist and explain the benefits and use of CAD/CAM
 Discuss the need for flexibility in manufacturing in the present
manufacturing scenario.
 Short note : Sequential Engineering.

23/12/2019 Prof. Neepa M. Patel, MPSTME. 58


23/12/2019 Prof. Neepa M. Patel, MPSTME. 59
Thank You…

23/12/2019 Prof. Neepa M. Patel, MPSTME. 60

You might also like