Collection of LG T-Con Board Testing Points & Voltages PDF
Collection of LG T-Con Board Testing Points & Voltages PDF
www.facebook.com/casalaptopguide/
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |2
CONTENTS
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |3
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |4
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |5
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |6
www.facebook.com/casalaptopguide
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |7
www.facebook.com/casalaptopguide
http://www.LCDRepairGuide.com
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |8
2) With this guide, you can see the T-con board small fonts easily with the help
of PDF viewer ZOOM IN feature.
3) Not only that, you also can compare each T-con board has difference circuit
design and signal control lines. So from this guide, you can easily to find out
what’s difference in each T-con board easily.
4) Attention: All the testing voltage values and waveform are based on their
LG Interconnect TV Models.
5) From this guide, you can also find out some of the T-con board just one part
number but can use in different sizes of LCD/LED Panel. But the different is
their firmware inside the T-con board only! (Some maybe need to change
some resistor/s (ohm values or the position/location) setting on the board to
match the panel and causing it working properly.
http://www.LCDRepairGuide.com/screen-repair-v2/
Page |9
1) 42LE5500 Interconnect
Panel P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 10
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 11
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 12
2) 47LE5500 Interconnect
Panel P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 13
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 14
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 15
3) 47LM7600 Interconnect
Panel P/N: EAJ62128701
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 16
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 17
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 18
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 19
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 20
4) 50LB6500 Interconnect
Panel P/N: EAJ62548101, EAJ62630101
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 21
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 22
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 23
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 24
5) 55LA8600 Interconnect
Panel P/N: EAJ62270501
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 25
SMTPE Color Bar input signal (Component). All signals taken at 2.5uSec per/sec/
100mV per/div.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 26
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 27
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 28
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 29
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 30
6) 55LB7200 Interconnect
Panel P/N: EAJ62270501
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 31
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 32
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 33
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 34
7) 55LM6700 Interconnect
Panel P/N: AFB73410002, EAJ62109301, EAJ62114401
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 35
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 36
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 37
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 38
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 39
1) 32LH30 Interconnect
Part Number:6871L-1438C
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 40
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 41
2) 37LH55 Interconnect
Warning: T-CON PWB under shield. Put screws back in before operating set with
shield removed.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 42
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 43
CN3: Pins-1, 2, 4 => GND, Pin-3= P-DIM. Pin-3 PDIM (Digital Dimming) can
vary according to the brightness level of the video signal and the OSD Backlight
setting. 0.6V= 0% to 3.3V= 100%. Ouput from the Video Processing chip IC100
(Mstar).
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 44
3) 42LB5800 Interconnect
Warning: T-con board under shield. Be sure to reinsert screws before operating set
with shield removed.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 45
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 46
All LVDS signals are taken with SMPTY Color Bar signal input (1080P)
Component Input. All LVDS signals are “Differential Pairs”. The ones shown are
the “Positive” signal of the pair. The Negative signal looks exactly the same but
flipped 180 degree. Scope settings are 100mV per/division, 2.5uSec per/division.
4) 42LG70 Interconnect
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 47
T-con PWB under shield. Be sure to reinsert screws before operating set with
shield removed.
LD1:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 48
5) 42LH20 Interconnect
TV Models: 42LH20
PANEL P/N:
Warning: T-con board under shield. Be sure to reinsert screws before operating set
with shield removed.
P801 Pin-3 PWM-DIM, 3.15V (Max 100%) to 0.6V (Min 0%) Customer’s MENU
backlight setting. However, this is not used on the T-CON Board.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 49
LED1:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 50
6) 42LH50 Interconnect
PANEL P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 51
UC1 drives Q2 which drives LD1 to assist the backlights during start up.
LD1:
30 seconds later,
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 52
7) 42LH90 Interconnect
TV Models: LG 42LH90
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 53
8) 42LK520 Interconnect
PANEL P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 54
Panel Test:
To run the T-CON “Panel Test, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 55
9) 42LN5300 Interconnect
Warning: Be sure to install the screws in the T-CON board before applying power.
Damage to the board will occur.
Panel Test:
To run the T-CON “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 56
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 57
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 58
All LVDS signals are taken with SMPTY Color Bar signal input (1080P)
Component Input. All LVDS signals are “Differential Pairs”. The ones shown are
the “Positive” signal of the pair. The Negative signal looks exactly the same but
flipped 180 degree. Scope Settings are 100mV per/division, 2.5uSec per/division.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 59
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 60
Warning: T-CON Board under shield. Be to reinsert screws before operating set
with shield removed.
PANEL Test:
To run the T-con “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jup VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
Note: Before doing the Panel Test, make sure their backlight can lit/operating
normally.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 61
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 62
TV Models: LG 42SL80
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 63
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 64
TV Models: LG 47GA6400
Warning: Return the screws when servicing the T-CON board with shields
removed.
If Quick Start is turned on in the Options Menu, T-CON 12V will be available
during STBY, but there will be no video to process. Also, no Backlight.
Pin Label
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 65
PANEL Test:
To run the T-CON “Panel Test”, remove the LVDS cable CN1. Jump 12V to the
12V fuse on T-con board. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue,
Green and Black patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 66
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 67
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 68
TV Models: LG 47LB6000
Warning:
Be sure to install the screws in the T-CON board before applying power. Damage
to the board will occur.
PANEL Test:
To run the T-CON “Panel Test”, use the Smart Test Jig or remove the LVDS
cables. Jump 12V to the 12V fuses. Apply 3.3V to pin-44 on CN1. White, Red,
Blue, Green and Black patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 69
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 70
TV Models: LG 47LG90
PANEL P/N:
Warning:
T-CON Board under shield. Be sure to reinsert screws before operating set with
shield removed.
Technical Note:
If there seems to be no back lights, disconnect CN8 and CN9 reapply power and if
backlights return the T-CON may be the root cause.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 71
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 72
PANEL P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 73
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 74
TV Models: LG 47LN5200_5400_5700_5750_5790
PANEL Test:
To run the T-CON “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 75
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 76
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 77
TV Models: LG 47LS4500_47LV550_47LV5500_47LW5300_47LW5600, LG
47LW5700 , LG 47LW6500
Warning:
T-CON Board under shield. Be sure to reinsert screws before operating set with
shield removed.
PANEL Test:
To run the T-CON “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 78
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 79
TV Models: LG 47LX6500
PANEL P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 80
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 81
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 82
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 83
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 84
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 85
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 86
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 87
TV Models: LG 47LX9500
PANEL P/N:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 88
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 89
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 90
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 91
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 92
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 93
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 94
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 95
TV Models: LG 55EA9800
Warning:
Make sure screws are in place, damage to the board may occur if they are left out.
FI13 ~17 are ground protect EMI Filters.
Make sure before reassembling the cover and counter weights that the Heat
Transfer materials “Chocolate” are replaced over UC17 and UC33-U36.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 96
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 97
TV Models: LG 55GA6400
Warning:
Return the screws when servicing the T-CON board with shields removed.
If Quick Start is turned on in the Options Menu, T-CON 12V will be available
during STBY, but there will be no video to process. Also, no backlights.
PANEL Test:
To run the T-con “Panel Test”, remove the LVDS cable CN1. Jump 12V to the
12V fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 99
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 100
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 101
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 102
TV Models: LG 55LA9650_55LA9700
Part Number:
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 103
To the Panel
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 104
TV Models: LG 55LM4600_4700_6200
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 105
Warning:
Return the screws when servicing the T-con board with shields removed.
PANEL TEST:
To run the T-CON “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 106
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 107
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 108
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 109
All LVDS signals are taken with SMPTY Color Bar signal input (1080P)
Component Input. All LVDS signals are “Differential Pairs”. The ones shown are
the “Positive” signal of the pair. The Negative signal looks exactly the same but
flipped 180 degree. Scope Setting are 100mV per/division, 2.5uSec per/division.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 110
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 111
TV Models: LG 55LM8600
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 112
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 113
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 114
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 115
TV Models: LG 55LW5600_5700_6500
PANEL P/N:
Warning:
T-Con board under shield. Be sure to reinsert screws before operating set with
shield removed.
Panel Test:
To run the T-con “Panel Test”, remove the LVDS cables. Jump 12V to the 12V
fuse. Jump VCC 3.3V to pin-44 on CN1. White, Red, Blue, Green and Black
patterns show on screen.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 116
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 117
TV Models: LG 55LX6500
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 118
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 119
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 120
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 121
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 122
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 123
Part Number:
Warning:
Be sure to install the screws in the T-CON board before applying power. Damage
to the board will occur.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 124
PANEL TEST:
To run the Panel Test (Testing the T-CON without the Mainboard), simply unplug
CN7_1 or CN7_2. Apply 12V to the Fuse F1 on the T-CON. Apply power to the
set. (Backlights and Power Supply should already be working). T-CON outputs
color patterns on the screen. This test confirms the T-CON board, Power Supply
(PSU), Panel and Backlights are working normally.
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 125
http://www.LCDRepairGuide.com/screen-repair-v2/
P a g e | 126
http://www.LCDRepairGuide.com
http://www.LCDRepairGuide.com/screen-repair-v2/