Scribd Logo
Upload

Welcome to Scribd!

  • 93 views

    RCB Board - CMP-DMP

    Uploaded by

    Chandra Sekhar
    The document discusses the architecture and functions of ZTE RNC control plane resource sharing technology. It describes how the RCB board is divided into DMP and CMP modules at version UR11.1 instead of the previous RCP and RSP modules at version U9.3. The DMP handles UE-related radio procedures as a shared pool, while each CMP is assigned to handle specific NodeB/CELL procedures and signaling transport. This allows more flexible allocation of resources to address disproportionate traffic distribution and improve capacity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    RCB Board - CMP-DMP

    Uploaded by

    Chandra Sekhar
    93 views1 page
    The document discusses the architecture and functions of ZTE RNC control plane resource sharing technology. It describes how the RCB board is divided into DMP and CMP modules at version UR11.1 instead of the previous RCP and RSP modules at version U9.3. The DMP handles UE-related radio procedures as a shared pool, while each CMP is assigned to handle specific NodeB/CELL procedures and signaling transport. This allows more flexible allocation of resources to address disproportionate traffic distribution and improve capacity.

    Original Title

    RCB board _CMP-DMP

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the architecture and functions of ZTE RNC control plane resource sharing technology. It describes how the RCB board is divided into DMP and CMP modules at version UR11.1 instead of the previous RCP and RSP modules at version U9.3. The DMP handles UE-related radio procedures as a shared pool, while each CMP is assigned to handle specific NodeB/CELL procedures and signaling transport. This allows more flexible allocation of resources to address disproportionate traffic distribution and improve capacity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    93 views1 page

    RCB Board - CMP-DMP

    Uploaded by

    Chandra Sekhar
    The document discusses the architecture and functions of ZTE RNC control plane resource sharing technology. It describes how the RCB board is divided into DMP and CMP modules at version UR11.1 instead of the previous RCP and RSP modules at version U9.3. The DMP handles UE-related radio procedures as a shared pool, while each CMP is assigned to handle specific NodeB/CELL procedures and signaling transport. This allows more flexible allocation of resources to address disproportionate traffic distribution and improve capacity.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 1

    ZTE RNC contains RCB board, which is divided into RCP and RSP used to process control plane

    protocol
    at U9.3 version. RCP is mainly used to handle the radio protocol including CELL-related and UE-related
    procedure. RSP is mainly used to handle signaling transport protocol including SCTP and M3UA. Every
    Cell and UE belongs to a RCP and the relation is configured before RCP startup and can’t be changed
    during running. The above architecture has an advantage of high system reliability. However, there is
    a shortage. The traffic in the telecommunication network could be different respect to time and area.
    If the NodeB and cell is affiliated to a given RCP, sometime traffic in these NodeBs and cells could
    exceed the maximum capacity of the RCP, and the other boards in the same RNC might not be fully
    utilized. To improve RCB board utilization efficiency, ZTE RNC introduces Control Plane Resource
    Sharing at UR11.1 version. Instead of RCP and RSP, RCB board is divided into DMP and CMP. DMP
    mainly handle UE-related radio procedure and all DMPs serve as a pool. CMP mainly handle
    NodeB/CELL-related procedure and signaling transport procedure. This architecture can avoid local
    congestion in some boards due to disproportionate traffic distribution in network Control Plane
    Resource Sharing Technology has a huge advantage that it can improve RNC Capacity. At U9.3 Version
    RNC with 34 RCB boards has 7000K BHCA, if upgrade to UR11.1 Version, the capacity of RNC with 34
    RCB boards will increase approximate 30% to 9000K BHCA. 2. Logic Board Function 2.1. Protocol Stack
    Overview Refer to Figure 1, DMP handle dedicated procedure of RANAP/RNSAP/NBAP and RRC. CMP
    handle common procedure of RANAP/RNSAP/NBAP and transport protocol including SCCP, M3UA,
    SCTP, MTP3B and ALCAP. Figure 1 protocol distribution 2.2. DMP function DMP only handle UE-
    related radio procedure such as RRC/RANAP/RNSAP/NBAP dedicated procedure and dedicated radio
    resource algorithm. There is no resource configuration belong to DMP. So, when a DMP is added and
    physical board is configured, this DMP will serve UE immediately, no extra configuration is needed.
    2.3. CMP function Compared to DMP, CMP has complex structure and function. First, CMP serve
    NodeB and CELL. NBAP Common procedure and Cell radio resource algorithm are implemented at
    CMP. Every NodeB and Cell is also affiliated to a given CMP as pre-configuration. Secondly, CMP
    handle connectionless signalling of RANAP and RNSAP(e.g. paging). Third, signaling transport protocol
    such as SCCP/M3UA/SCTP/MTP3B/ and transport control plane protocol such as ALCAP is resident at
    CMP, meantime CMP also manage the transport bandwidth resource. 3. Basic DBS Configuration Rule
    We list some basic config rule as following. · When a NodeB is added, a CMP module must be
    specified to serve it. The management module of NodeB cannot be changed during running. · Uplink
    Scrambling Code is managed by CMP. A SC range needs to be configured for every CMP and the range
    value must be different. · SCTP link is also managed by CMP. If a SCTP link is used to transport IUB
    message of a NodeB, then the module of the SCTP Link must be same to the host module of the
    NodeB. For SCTP link used to IU/IUR, the module can be an arbitrary CMP. It is recommended that the
    number of SCTP link used to IU/IUR is equal among CMPs if there is more than one SCTP link used to
    IU/IUR. · For transport resource management, PathGroup and TrPath is mainly resource object. They
    also need a configured CMP module. TrPath belong to a PathGroup and the module of TrPath must be
    same to the module of its parent PathGroup. If a TrPath is used to manage IUB resource of a NodeB,
    then the module of the TrPath must be same to the module of the NodeB. It is recommended that the
    number of PathGroup used to IU/IUR is equal among CMPs if there is more than one PathGroup used
    to IU/IUR. Finally, consider the system high reliability and function characterization, we strongly
    suggest that the CMP logical board type is split into two sub-type at OMC level: CMP(Iub) and
    CMP(NotIub). CMP(Iub) is used to IUB-related config. CMP(NotIub) is used to IU/IUR-related config. 第
    1 页 All Rights reserved, No Spreading abroad without Permission of ZTE DMP CMP RANAP-D/NBAP-
    D/RNSAP-D/RRC

    You might also like