Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    SF6 Meter Datasheet

    Uploaded by

    Haider-e-Karar
    The document describes an SF6 gas density monitor made by XI'AN DONGXU METERS INSTRUMENTS CO.,LTD. The monitor uses a temperature-compensated pressure gauge to reliably monitor SF6 gas density in sealed tanks over a wide temperature range. It provides alarm contacts when the gas density reaches preset threshold values. Key features include stainless steel wetted parts, an IP65 rating, and accuracy within 1-2.5% over operating temperatures from -30 to 60 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SF6 Meter Datasheet

    Uploaded by

    Haider-e-Karar
    100 views3 pages
    The document describes an SF6 gas density monitor made by XI'AN DONGXU METERS INSTRUMENTS CO.,LTD. The monitor uses a temperature-compensated pressure gauge to reliably monitor SF6 gas density in sealed tanks over a wide temperature range. It provides alarm contacts when the gas density reaches preset threshold values. Key features include stainless steel wetted parts, an IP65 rating, and accuracy within 1-2.5% over operating temperatures from -30 to 60 degrees Celsius.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes an SF6 gas density monitor made by XI'AN DONGXU METERS INSTRUMENTS CO.,LTD. The monitor uses a temperature-compensated pressure gauge to reliably monitor SF6 gas density in sealed tanks over a wide temperature range. It provides alarm contacts when the gas density reaches preset threshold values. Key features include stainless steel wetted parts, an IP65 rating, and accuracy within 1-2.5% over operating temperatures from -30 to 60 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views3 pages

    SF6 Meter Datasheet

    Uploaded by

    Haider-e-Karar
    The document describes an SF6 gas density monitor made by XI'AN DONGXU METERS INSTRUMENTS CO.,LTD. The monitor uses a temperature-compensated pressure gauge to reliably monitor SF6 gas density in sealed tanks over a wide temperature range. It provides alarm contacts when the gas density reaches preset threshold values. Key features include stainless steel wetted parts, an IP65 rating, and accuracy within 1-2.5% over operating temperatures from -30 to 60 degrees Celsius.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    XI'AN DONGXU METERS INSTRUMENTS CO.

    ,LTD

    SF6 Gas density monitor

    Applications
    SF6 Density Monitor monitoring in closed SF6 gas tanks

    Special features
    ■ Temperature-compensated pressure gauge with Bourdon tube
    ■ Suitable for outdoor use
    ■ Wetted parts from stainless steel
    ■ Local readout with alarm contacts
    ■ Hermetically leak-tight, therefore no negative impact by
    atmospheric pressure fluctuations and differences in altitude

    Description

    SF6 Density Monitors are an economical and reliable Conventional pressure gauges are not suitable here as
    way to monitor SF6 gas density and leakage over a the gas pressure changes depending on the ambient
    wide temperature range. These instruments are used tempera-ture, altitude and even atmospheric pressure.
    to monitor SF6 gas density in sealed tanks. They are The above factors together can amount up to 20 % of the
    applied to indicate gas density and to provide a signal working pressure and thus falsify the measurement
    outputs when the density reaches preset threshold signifi-cantly.
    values. They are designed to monitor Medium For this reason, SF6 Density Monitor measuring
    Voltage systems. instruments are temperature compensated and
    hermetically sealed.
    SF6 Density Monitor measuring instruments provide
    reliable warnings against dangerously low gas
    concentrations even in extreme environmental
    conditions. If the gas density decreases due to a
    leakage the magnetic snap-action contacts, which are
    actuated by the pointer, switch reliably and with
    repeatable accuracy.

    Page 1 of 3
    Specifications Movement
    Stainless steel
    Nominal size in mm Bimetal link (temperature
    63 compensation)
    Dial
    Accuracy Aluminium
    ■ ±1 % at ambient temperature +20 °C The scale range is subdivided into red, yellow and
    ■ ±2.5 % at ambient temperature -30 … +60 °C and green ranges
    with calibration pressure in accordance with reference
    isochor (reference diagram KALI-Chemie AG , Pointer
    Hannover, prepared by Dr. Döring 1979) Aluminium, black

    Scale range Case


    ■ -1 ... +1 bar Stainless steel, filled with dry nitrogen
    ■ -1 ... +3 bar Gas-tight: leak rate ≤ 1 · 10-5 mbar · l / s
    Test method: Quantitative leak detector
    Calibration pressure PE Window
    To customer specification glass

    Permissible temperature ranges


    Bezel ring
    Operating temperature: -20 … +60 °C (gas
    Bayonet ring, stainless steel, secured by means of 3
    phase) Storage temperature: -50 … +60 °C
    welding spots
    Alarm contacts and switching power
    Ingress protection
    Number: max. 2 magnetic snap-action contacts
    IP 65
    Switching function: Normally closed or normally open,
    optionally with galvanic isolation.
    Weight
    Switch points: not adjustable
    approx. 0.35 kg

    Maximum switching voltage: 250 V


    Switching power: 30 V / 50 VA, max. 1 A 80
    Options
    Material of the % Ag / 20 % Ni, 10 mm
    contacts: gold-plated
    ■ Radial process connection
    ■ Galvanic isolation of the switch contacts
    Switching accuracy in the temperature range
    ■ Laminated safety glass
    -20 … +60 °C
    ■ Other scale ranges on request
    Switch point = calibration pressure PE:
    As measuring span

    Switch point ≠ calibration pressure


    PE: Shifted parallel to calibration
    pressure
    High-voltage test
    2 kV, 50 Hz, 1 s (wiring against
    case)
    Electrical connection
    Attached cable: length 1 m, with glass
    bushing
    Process connection
    G ¼ B according to EN 837, back
    mount Stainless steel
    Wrench flat 14 mm

    Pressure element
    Stainless steel, welded
    Gas-tight: leak rate ≤ 1 · 10-8 mbar · l / s
    Test method: spectrometry of helium
    mass

    Page 2 of 3
    Dimensions in mm

    Ordering information
    Model / nominal size / scale range / process connection / filling pressure / calibration pressure / switch point / switching
    function / options

    XI'AN DONGXU METERS INSTRUMENTS CO.,LTD


    37 BLOCK,HENGDACHENG,
    XI'AN,SHAANXI,CHINA
    Tel. (+86) 89304990
    Fax (+86) 89304996
    www.cngpressuregauge.com
    Page 3 of 3

    You might also like