Scribd Logo
Upload

Welcome to Scribd!

  • 23 views

    Novamid ID1070 en SI

    Uploaded by

    Rui Matias

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Novamid ID1070 en SI

    Uploaded by

    Rui Matias
    23 views1 page

    Original Title

    NovamidID1070enSI

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    23 views1 page

    Novamid ID1070 en SI

    Uploaded by

    Rui Matias

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Property Data (Provisional)

    ®
    Novamid ID 1070
    PA copolymer
    3D printing grade

    Print Date: 2018-12-13

    The mechanical data is tested on printed tensile bars, printed in two directions: 0°-90° and 45°-45°

    Properties Typical Data Unit Test Method

    Thermal properties dry / cond

    Melting temperature (10°C/min) 220 / * °C ISO 11357-1/-3

    Temp. of deflection under load (1.80 MPa) 54 / * °C ISO 75-1/-2

    Temp. of deflection under load (0.45 MPa) 104 / * °C ISO 75-1/-2

    Other properties dry / cond

    Water absorption 12 / * % Sim. to ISO 62

    Humidity absorption 3.5 / * % Sim. to ISO 62

    Density 1120 / - kg/m³ ISO 1183

    Material specific properties Value

    Maximum tensile stress (3D printed tensile bars) 0°-90° 45 MPa ISO 527-1/-2

    Maximum tensile stress (3D printed tensile bars) 45°-45° 50 MPa ISO 527-1/-2

    Tensile modulus (3D printed tensile bars) 0°-90° 1710 MPa ISO 527-1/-2

    Tensile modulus (3D printed tensile bars) 45°-45° 2120 MPa ISO 527-1/-2

    Elongation at break (3D printed tensile bars) 0°-90° 7.2 % ISO 527-1/-2

    Elongation at break (3D printed tensile bars) 45°-45° 15 % ISO 527-1/-2

    Akulon®, Arnite®, Arnitel®, EcoPaXX®, ForTii®, Novamid®, Stanyl® and Xytron™ are trademarks of DSM.
    All information supplied by or on behalf of DSM in relation to its products, whether in the nature of data, recommendations
    or otherwise, is supported by research and, in good faith, believed reliable, but DSM assumes no liability and makes no
    warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular
    purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect
    of application, processing or use made of the aforementioned information, or product. The user assumes all responsibility for
    the use of all information provided and shall verify quality and other properties or any consequences from the use of all such
    information.
    Typical values are indicative only and are not to be construed as being binding specifications. This document replaces all
    previous versions relating to this subject.
    Copyright © DSM 2018. All rights reserved. No part of the information may be reproduced, distributed, or transmitted in any
    form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior
    written permission of DSM.

    You might also like