Tdi 50000 Tpy, GNFC
Tdi 50000 Tpy, GNFC
Tdi 50000 Tpy, GNFC
Page
500-001M.02
No. No
2 Process Fluid ACS/3 6 Design & Manuf. Std ASME B 16.34 / API 594
7 ASME B 16.10
2 Body Wafer type Face Dim.)
3 Closure Plate Spring loaded Type
4 Disc Single Plate
5 Facing RF,Serrated
Seat 24 7
* 100% to clause 8.3.1.1 &
3 X-Ray
Annex. B of ASME B16.34
4 Inspection By IBIC/GNFC
5 Test Certificates Yes
Purchase order no : Vendor to specify
Notes:
1. Flow direction to be marked on valves.
2. All Valves Name Plate should be of SS304.
3. Valve ends shall be suitable for mounting between two 150#, RF, Serrated Finish Flanges, as per ASME B16.5.
4. Disc shaft must not penetrate body.
* 100% radiography testing one casting per heat lot / batch for body.
5. Vendor should send the specification sheet duly stamped & signed with "No deviations" as a token of acceptance. If there are deviations same
should be clearly highlighted & mentioned in the sheet itself or in Deviation Form.
Doc. Page
500-001M.02
No. No
Date
23/12/2009
6/10/2009
ASHEET FOR DUAL PLATE WAFER TYPE CHECK VALVE
150 #
ASME B 16.34 / API 594
CS623
ASME B 16.10
AISI 316
AISI 316
AISI 316
NA
AISI 316
Epoxy
Vendor to specify
Date
23/12/2009
6/10/2009
Doc.
500-001M.02 Page No 2 of 2
No.
Rev. Description By Chkd App. Date
500 Piping Engineering
TDI 50000 TPY, GNFC
10% Total
Actual Total Procurement Qty Total Procurement Qty
Sr.No. Valve Code Size Contingen Procurement
Qty. (Enquiry) (Final)
cy Qty (90%)