Scribd Logo
Upload

Welcome to Scribd!

  • 69 views

    UG11T2702 Advanced Marine Control Engg & Automation

    Uploaded by

    Srinivasan Prakash
    This document contains an exam for a course on Advanced Marine Control Engineering and Automation. [PART A] contains 10 short answer questions covering topics like transfer functions, control system concepts, valve positioners, transducers, and programmable logic controllers. [PART B] contains 8 longer answer questions, asking students to calculate transfer functions and error coefficients, discuss control system modeling and different types of controllers, and explain concepts like flapper nozzles, synchros, boiler feed water control systems, and PLC components and functioning. The exam tests students' understanding of key concepts and systems in marine control engineering and automation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    UG11T2702 Advanced Marine Control Engg & Automation

    Uploaded by

    Srinivasan Prakash
    69 views3 pages
    This document contains an exam for a course on Advanced Marine Control Engineering and Automation. [PART A] contains 10 short answer questions covering topics like transfer functions, control system concepts, valve positioners, transducers, and programmable logic controllers. [PART B] contains 8 longer answer questions, asking students to calculate transfer functions and error coefficients, discuss control system modeling and different types of controllers, and explain concepts like flapper nozzles, synchros, boiler feed water control systems, and PLC components and functioning. The exam tests students' understanding of key concepts and systems in marine control engineering and automation.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains an exam for a course on Advanced Marine Control Engineering and Automation. [PART A] contains 10 short answer questions covering topics like transfer functions, control system concepts, valve positioners, transducers, and programmable logic controllers. [PART B] contains 8 longer answer questions, asking students to calculate transfer functions and error coefficients, discuss control system modeling and different types of controllers, and explain concepts like flapper nozzles, synchros, boiler feed water control systems, and PLC components and functioning. The exam tests students' understanding of key concepts and systems in marine control engineering and automation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    69 views3 pages

    UG11T2702 Advanced Marine Control Engg & Automation

    Uploaded by

    Srinivasan Prakash
    This document contains an exam for a course on Advanced Marine Control Engineering and Automation. [PART A] contains 10 short answer questions covering topics like transfer functions, control system concepts, valve positioners, transducers, and programmable logic controllers. [PART B] contains 8 longer answer questions, asking students to calculate transfer functions and error coefficients, discuss control system modeling and different types of controllers, and explain concepts like flapper nozzles, synchros, boiler feed water control systems, and PLC components and functioning. The exam tests students' understanding of key concepts and systems in marine control engineering and automation.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    INDIAN MARITIME UNIVERSITY

    (A Central University, Government of India)


    END SEMESTER EXAMINATIONS –DECEMBER 2018

    B. Tech (Marine Engineering)


    Semester -VII
    ADVANCED MARINE CONTROL ENGINEERING AND AUTOMATION
    (UG11T2702)
    _____________________________________________________________
    Date: 28.12.2018 Maximum Marks: 100
    Time: 3Hrs Pass Marks: 50

    PART – A

    (All questions are compulsory) (10x3 = 30 Marks)

    1. (a) What do you mean by transfer function?

    (b) Write down the Mason’s Gain formula for signal flow diagram.

    (c) Define analogous system and its types.

    (d) What do you mean by basic control action of controllers?

    (e) Define the concept of Off-set in a control system.

    (f) List down the various reasons for employing valve positioners in
    correcting units.
    (g).Briefly discuss the functioning of a Variable Inductance
    transducer with the help of a simple sketch.

    (h).Sketch and briefly describe a system for controlling exhaust


    steam pressure using split range control.
    (i) What are the advantages of a PLC?

    (j) What are the two basic symbols that make up the Relay, “a” and
    “b” contacts?
    PART – B
    (Answer any 5 of the following) (5x14 = 70 Marks)
    
    2. (a) A system has   = with unity feedback where, and T
     
     
    are constants. The overshoot is to be reduced from 75 % to 25 %,
    Find the factor by which should be multiplied. (7 Marks)

    
    
    (b) For unity feedback system   =
    
    
    
    Find
    i) Type of system
    ii) Error coefficients.
    
    iii)  When subjected to input 8 (7 Marks)
    

    3. (a) Write the advantages and disadvantages of transfer function for a


    system. (7 Marks)
    (b) Write down the mathematical modelling of field controlled DC
    motor. (7 Marks)

    4. (a) With respect to electronic controllers, Find the overall transfer


    function for PID controller by using two operational Amplifier.
    (7 marks)
    (b) What is ON-OFF controller. Illustrate with an example
    (7 marks)

    5. (a) With respect to automatic controllers, explain in detail


    Pneumatic Proportional + Integral controller. (7 marks)
    (b) Explain the construction of a two-way control valve with a
    diaphragm actuator. (7 marks)

    6. (a) Explain with a neat sketch how Flapper Nozzle arrangement converts
    mechanical movement to pneumatic signal. With the help of a graph,
    discuss the linear proportionality of output signal for a Flapper Nozzle
    arrangement. (7 marks)
    (b) Discuss the functioning of Synchros with the help of a neat sketch.
    What are its applications. (7 marks)
    7. (a) Explain in detail Boiler 3 element feed water control system. How is it
    different from single element and two element control? (7 marks)
    (b) List down the various requirements of UMS classification of
    merchant vessels. (7 marks)

    8. (a) Explain the working principle of a PLC. (7 marks)


    (b) Draw a simple Block Diagram of a PLC and explain the functions of
    the components. (7 marks)

    ************

    You might also like