Scribd
Upload
507 views2 pages

3130905

The document is an exam for a control system theory course, containing 5 questions regarding key concepts in control systems. It begins by asking students to define terms like control system, plants, and process. Subsequent questions address topics such as steady state error, open vs closed loop systems, stability analysis using Routh-Hurwitz criterion and Nyquist stability criterion, root locus analysis, time and frequency response analysis using Bode plots, polar plots, state variable analysis, and controllability and observability.

Uploaded by

manish_iitr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
507 views2 pages

3130905

The document is an exam for a control system theory course, containing 5 questions regarding key concepts in control systems. It begins by asking students to define terms like control system, plants, and process. Subsequent questions address topics such as steady state error, open vs closed loop systems, stability analysis using Routh-Hurwitz criterion and Nyquist stability criterion, root locus analysis, time and frequency response analysis using Bode plots, polar plots, state variable analysis, and controllability and observability.

Uploaded by

manish_iitr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Seat No.: ________ Enrolment No.

___________

GUJARAT TECHNOLOGICAL UNIVERSITY


BE - SEMESTER– III (New) EXAMINATION – WINTER 2019
Subject Code: 3130905 Date: 3/12/2019
Subject Name: Control System Theory
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Marks
Q.1 (a) Define the following terms.
03
(1) Control system(2) Plants (3) Process
(b) Explain transfer function and State advantages and Dis-advantages of
04
transfer function.
(c) Solve the block diagram to find transfer function of the system shown in
figure.

07

Q.2 (a) Explain Steady state Error. 03


(b) Compare Open loop Vs close loop control systems 04
(c) The characteristic equation of feedback control system is given by
s4+20s3+15s2+2s+K=0
1) Calculate the range of K for the system to be stable. 07
2) Can the system be marginally stable? If so, find the required
value of k and frequency of sustained oscillation.
OR
(c) Write Nyquist contour and Nyquist stability criterion in brief. 07

Q.3 (a) Calculate damping ratio and Undamped natural frequency of


oscillation for the open loop transfer function of a servo system with 03
10
unity feedback system: 𝐺(𝑆) = (𝑆+2)(𝑠+5)
(b) Explain Standard Test Signals used in control system 04
(c) Construct the root loci of open loop transfer function of the feedback
𝑘(𝑆+3) 07
control system given as 𝐺(𝑆)𝐻(𝑆) = 𝑠(𝑠+2)
OR
Q.3 (a) Simplify the significance of proportional control. 03
(b) Define following terms with respect to second order system.
1) Delay Time
2) Rise Time 04
3) Peak Time
4) Steady state error
Page 1 of 2
(c) Consider a lag-lead network defined by
1 1
(𝑠 + 𝑇1)(𝑠 + 𝑇2)
𝐺𝑐(𝑠) = 𝑘 𝛽 1
(𝑠 + 𝑇1)(𝑠 + 𝛽𝑇2)
07
1
Show that at frequency 𝜔1, where 𝜔1 = , the phase angle of
√𝑇1 2𝑇
𝐺𝑐(𝑗𝜔) becomes zero.

Q.4 (a) Explain the effect of integral control action on system Performance. 03
(b) Explain relationship between time and frequency response. 04
(c) Explain step by step Procedure for Phase Lag Network. 07
OR
Q.4 (a) Explain the advantages of bode plot. 03
(b) Summarize types of compensation and explain any one. 04
(c) Explain the step by step procedure for obtaining bode plot. 07

Q.5 (a) Explain polar plots with a sketch of a simple example 03


(b) Decide that How stability can be ensured from Routh Table? 04
(c) Distinguish state variable approach verses the classical approach of
07
transfer function for the analysis of control systems.
OR
Q.5 (a) Explain following terms. 1) State variable 2) State trajectory 3) State vector 03
(b) Define and explain following terms with respect to frequency
response.
1) Gain Margin
04
2) Phase Margin
3) Gain Crossover frequency
4) Phase Crossover frequency
(c) Investigate Controllability and observability of the system

0 1 0 0
𝑋(𝑡) = [ 0 0 1 ] 𝑋(𝑡) + [0] 𝑢(𝑡)
07
−6 −11 −6 2

𝑐(𝑡) = [1 0 0]𝑥(𝑡)

***************************************

Page 2 of 2

You might also like