DMPS3-4K-350-C

3-Series® 4K DigitalMedia™ Presentation System 350

>> Ultra high-definition 9x4 system switcher, scaler, mic mixer, >> Provides intelligent frame rate conversion, content-adaptive
audio DSP, amplifier, and control system noise reduction, and motion-adaptive de-interlacing
>> Built-in .AV Framework™ delivers a fully-functional system without >> Provides 3D to 2D signal conversion [5]
any programming [2]
>> Provides three balanced stereo audio outputs, each with
>> Integrated 3-Series Control System® allows fully-programmable independent mixer and DSP
room control
>> Provides two additional audio mixes, either of which is selectable
>> Onboard AirMedia® gateway enables wireless BYOD at any digital output
presentation capability [1]
>> Features a built-in amplifier, selectable for 25W/Ch. @ 8Ω stereo
>> Built-in H.264 streaming video decoder [3] or 50W @ 70/100 Volts mono
>> Provides matrix signal routing for up to 9 video sources and >> Enables analog-to-HDMI audio embedding and de-embedding
4 displays
>> Enables USB signal routing via DM® transmitters and receivers or
>> Handles video resolutions up to 4K DCI and Ultra HD USB-EXT-DM series extenders [9]
>> Includes HDMI®, DM 8G+®, and balanced stereo analog >> Includes onboard IR, RS-232, relay, digital input, and Cresnet®
audio inputs control ports
>> Also supports Dual-Mode DisplayPort, DVI, and >> Supports Crestron® touch screens, keypads, and
HDBaseT® sources [4] wireless remotes
>> QuickSwitch HD™ technology manages HDCP keys for fast, >> Supports XPanel with Smart Graphics® computer and web
reliable switching based control
>> Auto-Locking® technology achieves rapid switching between >> Supports iPhone®, iPad®, and Android™ control apps
disparate sources
>> Supports universal remotes via external RC-5 compatible
>> Performs automatic AV signal format management via EDID IR receiver [6]
>> HDCP 2.2 compliant >> Communicates natively with Crestron Fusion®
>> Provides adjustable input level compensation on each >> Enables IT-friendly network integration via SNMP
audio input
>> Integrated Ethernet switch provides a single-point LAN connection
>> Includes built-in 6-channel gated microphone mixing with DSP
>> Control Subnet — provides a dedicated local network for
>> Provides two HDMI and two DM 8G+ (HDBaseT compatible) Crestron devices
outputs
>> Private Network Mode — requires just one IP address for the
>> DigitalMedia 8G+® connectivity enables long-distance wiring over complete system
CAT type twisted pair cable [7]
>> Content LAN port allows streaming and AirMedia traffic to be
>> HDBaseT Certified — Enables direct connection to other isolated on a secondary network
HDBaseT certified equipment
>> Includes front panel controls for basic configuration, diagnostics,
>> Features an independent, high-performance 4K scaler at each and signal routing
HDMI output
>> Includes customizable front panel label strips and LCD display
>> Upscales input signals to match the native resolution of any
>> Allows advanced setup and adjustment via a web browser
screen — including 4K and Ultra HD displays!
>> Features an internal universal power supply for
>> Downscales 4K, UHD, and ultra high-resolution computer signals
worldwide compatibility
to fit 1080p and other lower-resolution displays
>> Furnishes power to PoDM+ and HDBaseT PoE+
>> Handles any input resolution from standard NTSC 480i or
powered devices [8]
PAL 576i, to UHD and 4K
>> 3-space 19-inch rack-mountable

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

DMPS3-4K-350-C – Rear View

The DMPS3-4K-350-C from Crestron® offers an all-in-one 4K AV and PDF documents, as well as pictures, videos, or any app content with
presentation system for classrooms, boardrooms, lecture halls, and full-screen mirroring. AirMedia lets up to 32 participants connect at once,
videoconference rooms. Delivering a complete, custom-programmable switching from one to the next for seamless collaboration on the fly.[1]
room solution with fully-configurable signal routing and processing is
easy and cost-effective using the DMPS3-4K-350-C. In one 3-space rack HD Streaming Video
mount package, it integrates the control system, matrix switcher, video Its onboard streaming decoder enables the DMPS3-4K-350-C to receive a
scalers, streaming decoder, mic mixer, audio DSP, and amplifier. Its built-in high-definition AV signal over the network or internet from a DigitalMedia
AirMedia® gateway, when activated [1], enables wireless presentation from switcher, IP camera, or streaming encoder (Crestron DM-TXRX-100-STR
computers and mobile devices. DigitalMedia 8G+® and HDBaseT® or similar). H.264 and MJPEG streaming formats are supported with
connectivity affords a streamlined, long-distance wiring solution for remote resolutions up to HD 1080p and bitrates up to 25 Mbps. High-quality AAC
sources and display devices, and for facility-wide integration as part of a audio decoding is employed to handle 2-channel stereo audio with full
larger media distribution system. frequency response.[3]

Note: To purchase the DMPS3-4K-350-C with AirMedia pre-activated (no 4K System Switcher
license required), see model DMPS3-4K-350-C-AIRMEDIA. The DMPS3-4K-350-C provides high-performance routing of HDMI®,
AirMedia [1], and streaming AV sources to up to four separate displays,
4K Ultra HD projectors, codecs, and other devices. Its video inputs include six HDMI,
Crestron DigitalMedia™ continues to advance the standard for digital AV two DM 8G+®, and one streaming/AirMedia. The HDMI inputs are
signal management, delivering the most complete end-to-end 4K system compatible with DVI and Dual-Mode DisplayPort sources [4], and the DM
solutions available. The DMPS3-4K-350-C handles 4K/60 video with 8G+ inputs are compatible with HDBaseT. Five balanced analog audio
HDCP 2.2 encryption, ensuring support for all the latest 4K and Ultra HD inputs are also included. Each HDMI and analog audio input includes
displays and media sources. Support for 4K is also essential to support adjustable input compensation to accommodate a range of signals and
the latest generation of computers and monitors with native resolutions maintain consistent volume levels when switching between sources.
beyond 1080p and WUXGA.
Built-in 9x4 video matrix switching allows up to four different video
No Programming Required! sources to be routed simultaneously to four different display devices. Video
Installing the DMPS3-4K-350-C is easy, fast, and affordable. Built-in outputs are comprised of two HDMI and two DM 8G+. The HDMI outputs
.AV Framework™ technology delivers a fully-functional presentation system are compatible with DVI [4] and the DM 8G+ outputs are compatible
with simplified configuration and a choice of control options and other add- with HDBaseT.
ons. For complete details on the capabilities supported by .AV Framework,
please visit: http://www.crestron.com/avframework.[2] The audio signal from any input can be freely routed to any of three
separate stereo analog audio outputs. Audio can also be routed to the
AirMedia® Wireless Presentation [1] digital outputs via two independently switchable signal paths, either of
Built-in AirMedia technology allows for wireless presentation of content which may be selected to feed any HDMI or DM 8G+ output.
from a laptop, smartphone, or tablet device via a Wi-Fi® wireless network.
With AirMedia, anyone can walk into the room with a Windows® or 4K/60 Video Scaling
MacBook® laptop and connect without wires, enabling the presentation of An independent, high-performance 4K scaler is included on each HDMI
any content including Full HD video at frame rates up to 30 fps. iPhone®, output to ensure an optimal image on each display no matter what sources
iPad®, and Android™ devices can present PowerPoint®, Excel®, Word, are selected. Each scaler allows all types of video and computer sources to

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

be viewed reliably and look their best on any display up to 4K. Built-in Power Amplifier
Its built-in power amplifier allows the DMPS3-4K-350-C to directly drive
Input resolutions from standard definition NTSC 480i to ultra high-definition a pair of stereo speakers (25 Watts per channel @ 8Ω), or a group of
4K DCI are scaled beautifully to any output resolution up to 4K DCI (4096 x distributed ceiling speakers (50 Watts mono @ 70 or 100 Volts). Fed by
2160 @ 60 Hz). Interlaced sources are converted to progressive scan using the main “Program” output, the internal amplifier benefits fully from the
motion-adaptive deinterlacing. Intelligent frame rate conversion enables onboard DSP. For larger applications, Crestron AMP-Series power amplifiers
support for 24p and PAL format sources. And, 3D to 2D conversion allows may be added to provide a complete solution for driving separate program
3D content to be viewed on 2D-only displays.[5] Fully automatic operation and speech speakers, or any multi-zone speaker system.
eliminates any complicated setup by utilizing the displays’ EDID to
configure each scaler. Audio Embedding & De-Embedding
The inclusion of professionally balanced analog audio inputs and outputs,
Scaling can be added to either DM 8G+ output using the
combined with the ability to route audio signals independent of video,
DM-RMC-4K-SCALER-C receiver [6], which features its own built-in 4K
affords extensive flexibility for many specialized applications — without
scaler. This method of employing an independent scaler for each display
the need for any extra equipment! For instance, its balanced inputs allow
device delivers the most versatile and reliable solution for handling a
the DMPS3-4K-350-C to interface directly with an audio mixing console,
wide array of input sources and routing them to multiple disparate
allowing the live sound mix to be embedded with the video signal from a
display devices.
digital camera and combined into a single HDMI output signal. Or, any of its
DigitalMedia 8G+® balanced outputs may be used to de-embed audio from a digital AV source
to feed the mixing console. An “Aux” output may even be re-routed back
Its DM 8G+ inputs and outputs endow the DMPS3-4K-350-C with
through an analog input to allow its built-in DSP, or an external DSP, to be
incredible potential for connecting remote sources and display devices,
used to process the audio signal feeding the HDMI and DM 8G+ outputs.
and integrating with larger systems. DM 8G+ provides a true one-wire
interface for transporting ultra high-definition video, audio, control, power, EDID Format Management
and networking signals over CAT type cable at distances up to 330 feet
The DMPS3-4K-350-C allows for management of the EDID (Extended
(100 meters). Connecting a DM 8G+ receiver to either DM 8G+ output
Display Identification Data) information that passes between the display
provides a streamlined AV and control interface for a projector or flat panel
devices, scalers, and input sources in the system. From the web browser
display located anywhere in the room. Connecting up to two DM 8G+
setup screen, the format and resolution capabilities of each device can be
transmitters provides expanded input connectivity to incorporate remote
assessed, allowing the installer to configure EDID signals appropriately for
AV sources and mobile devices at a conference table, lectern, credenza,
the most desirable and predictable behavior.
wall plate, or some other location. DM 8G+ can also provide the interface
to a centralized DigitalMedia matrix switcher to enable the distribution of QuickSwitch HD™ Technology
signals between multiple rooms and buildings.[7,8]
Handling digital media signals means handling HDCP (High-bandwidth
HDBaseT® Certified Digital Content Protection), the encryption scheme used by content
providers to protect their DVDs, Blu-ray™ discs, and broadcast signals
Crestron DM 8G+ technology is designed using HDBaseT Alliance
against unauthorized copying. Viewing HDCP encrypted content requires a
specifications, ensuring interoperability with other HDBaseT certified
source device to “authenticate” each display and signal processor in the
products. Via DM 8G+, the DMPS3-4K-350-C can be connected directly to
system and issue it a “key” before delivering an output signal. Crestron
an HDBaseT compliant source or display device without requiring a DM®
QuickSwitch HD manages these keys to ensure fast, reliable switching and
transmitter or receiver.
immunity to “blackouts” for every source and display device connected to
6-Channel Microphone Mixer the system.
The DMPS3-4K-350-C includes built-in mixing and processing for six Auto-Locking® Technology
microphones. Each mic input provides 60 dB of gain adjustment,
Crestron Auto-Locking Technology enables super-fast signal switching
switchable 48V phantom power, fully-adjustable gating, compression,
by instantaneously configuring every device in the signal path, including
delay, and 4-band semi-parametric EQ. Sophisticated matrix mixing allows
DM transmitters, DM receivers, and scalers, as soon as the signal hits the
for a completely different stereo mix of all six microphones at each of the
first device. Whether switching between sources or changing TV channels,
DMPS3-4K-350-C’s three analog audio outputs. Two additional mixes can
Auto-Locking significantly reduces the time it takes each device to sense
be configured and selected to feed any of the HDMI or DM 8G+ outputs.
the new signal and configure itself to handle the changes, virtually
Professional Audio DSP eliminating any noticeable gap while switching.
Each analog audio output on the DMPS3-4K-350-C includes its own USB Signal Routing
digital signal processor, allowing each output to be optimized to feed a
Along with video and audio, the DMPS3-4K-350-C can also provide for the
power amplifier, codec, recorder, or assistive listening system. In addition
routing of USB HID (Human Interface Device) signals, allowing a USB HID
to real-time adjustable volume, bass, treble, and mute controls, each DSP
compliant keyboard and/or mouse at one location to control a computer or
provides 10-band graphic equalization, 4-band parametric equalization,
media server at another location. USB HID connectivity is provided through
fully-adjustable limiting, and up to 85 ms of speaker delay adjustment.
select DM receivers and transmitters. Crestron also offers USB over

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

Ethernet Extenders (USB-EXT-DM-LOCAL and USB-EXT-DM-REMOTE [6]), enabled through the front panel or a web browser. The front panel label
which may be used to enable the routing of multiple USB devices of virtually strips can be customized using Crestron Engraver software or standard
any type, all seamlessly managed through the DMPS3-4K-350-C.[9] 3/8” tape labels, allowing for the clear designation of each input and
output. Inputs and outputs may also be designated by name to appear on
Integrated 3-Series Control System® the LCD display when selected.
Its built-in 3-Series control system enables the DMPS3-4K-350-C to
provide complete, customizable control of every AV device, as well as Crestron Connect It™
room lighting, window shades, and projection screens, without requiring a Crestron Connect It is a cost-effective, simple-to-use presentation solution
separate control processor. Onboard control ports include four IR ports, two that works seamlessly with the DMPS3-4K-350-C. Simply add one or more
RS-232 COM ports, four relay ports, and four digital input ports, as well Crestron Connect It Cable Caddies (TT-100, TT-101, TT-110, or TT-111
as Cresnet® and Ethernet. The DMPS3-4K-350-C supports the full line of series [6]). to provide BYOD connectivity and one-touch control for multiple
Crestron touch screens, keypads, and wireless remotes for a user participants around a conference table. Power and communications for
experience custom tailored to the specific requirements of each end-user. each cable caddy are provided via Cresnet, or via the USB port on a
Support for Crestron control apps and Crestron Fusion® delivers the Crestron Connect It compatible DM transmitter.
industry’s most powerful platform for remotely controlling, monitoring, and
managing multiple rooms using computers and mobile devices.
SPECIFICATIONS
CEC Embedded Device Control
For controlling third-party AV devices, the DMPS3-4K-350-C provides an Operating System
alternative to conventional IR, RS-232, and Ethernet by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Using CEC, Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking
many devices can be controlled right through their HDMI or HDBaseT kernel; Transaction-Safe Extended FAT file system; supports up to 10
connections, eliminating the need for any dedicated serial cables or simultaneously running programs; preloaded DMPS3 .AV Framework
IR emitters. Base Program

Memory
Built-in Ethernet Switch
In addition to transporting digital video and audio, the DM 8G+ ports on the SDRAM:  512 MB
DMPS3-4K-350-C can also extend Ethernet out to the display and source Flash:  4 GB
devices (via select DM transmitters and receivers), providing high-speed
connectivity for each room device that requires a LAN connection. Ethernet Communications
is also utilized internally by the Crestron control bus to manage each
transmitter and receiver and provide device control. Ethernet:  10/100/1000 Mbps, auto-switching, auto-negotiating, auto-
discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP,
Dedicated Control Subnet DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2
The Crestron Control Subnet is a Gigabit Ethernet network dedicated to compliant encryption, IEEE 802.1X, SNMP, BACnet™/IP [10], IPv4 or IPv6,
Crestron devices. Via the DMPS3-4K-350-C’s Control Subnet port, an Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client,
installer may simply connect a single touch screen or wireless gateway, or RSTP, Private Network Mode
add a Crestron PoE switch (CEN-SW-POE-5 or CEN-SWPOE-16 [6]) to handle Control Subnet:  10/100/1000 Mbps Ethernet, auto-switching, auto-
multiple touch screens, gateways, and other devices. PoE can be enabled negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server,
at the Control Subnet port to power a single touch screen or other PoE port forwarding, Isolation Mode, IEEE 802.3at Type 1 compliant PoE PSE
powered device.[8] Auto-configuration of the entire subnet is performed by AirMedia [1]:  (Via Ethernet) 10/100 Mbps, IPv4, DHCP, TLS, AES, mDNS,
the DMPS3-4K-350-C, discovering each device and assigning IP addresses HTTPS web server
without any extra effort from the installer. Streaming:  (Via Ethernet) 10/100 Mbps, DHCP, H.264 decoding, MJPEG
decoding, HDCP 2.2, RTP, RTSP, SDP
Private Network Mode Cresnet:  Cresnet master mode
To streamline its implementation on a corporate or university LAN, the USB:  USB signal routing via select DM transmitters and receivers, or
DMPS3-4K-350-C employs Private Network Mode. Using Private Network via USB-EXT-DM series extenders [9]; USB device port for computer
Mode, the DMPS3-4K-350-C requires just one IP address for the complete console (setup)
room system including all connected DM receivers and transmitters. RS-232:  2-way device control and monitoring up to 115.2k baud with
hardware and software handshaking
Easy Setup
IR/Serial:  1-way device control via infrared up to 1.2 MHz or serial TTL/
Every step of the DMPS3-4K-350-C setup process is designed to be quick RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver [6]
and easy. Out of the box, the front panel supports basic signal routing for
DigitalMedia:  DM 8G+, HDCP 2.2, EDID, CEC, PoDM+ [8], Ethernet
easy testing and troubleshooting during installation. Simplified system
HDBaseT:  HDCP 2.2, EDID, CEC, RS-232, PoE+ [8], Ethernet
configuration is enabled using .AV Framework, which is easily configurable
via a computer web browser.[2] Advanced configuration and adjustment is HDMI®:  HDCP 2.2, EDID, CEC

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

NOTE: Supports management of HDCP and EDID; supports management Audio – General
of CEC between the connected HDMI and HDBaseT devices and the
control system Switcher/Mixer:  14x5 stereo source matrix switcher, digital & analog
source inputs, streaming & AirMedia source input, 6-channel gated mic
Video mixer w/DSP, independent mixer per analog output (6-ch mic + 1 stereo
source), independent stereo DSP per analog output, integrated power
Switcher:  9x4 matrix, Crestron QuickSwitch HD technology amplifier, two independent digital output mixers (6-ch mic + 1 stereo
Scalers (HDMI outputs):  (2) 4K video scalers with motion-adaptive source), 2x1 digital output mix selector per digital output
deinterlacing, intelligent frame rate conversion, Deep Color support, Analog-To-Digital Conversion:  24-bit 48 kHz
3D to 2D conversion [5], content-adaptive noise reduction, and widescreen Digital-To-Analog Conversion:  24-bit 48 kHz
format selection (zoom, stretch, maintain aspect-ratio, or 1:1) Frequency Response, Digital & Analog Line Outputs: 
Input Signal Types:  HDMI w/Deep Color, 3D [5], & 4K (DVI & Dual-Mode 20 Hz to 20 kHz ±0.5 dB (digital source);
DisplayPort compatible [4]) on Inputs 1-6; DM 8G+ & HDBaseT w/Deep 20 Hz to 20 kHz ±0.5 dB (analog line source);
Color, 3D [5], & 4K on Inputs 7 & 8; streaming & AirMedia on Input 9 (LAN)
20 Hz to 20 kHz ±0.7 dB (microphone source)
Output Signal Types:  HDMI w/Deep Color & 4K (DVI compatible [4]) on
Frequency Response, Speaker Output: 
Outputs 1 & 2; DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K on Outputs 3 & 4
20 Hz to 20 kHz ±1 dB @ 25 Watts into 8 Ohms;
Maximum Resolutions:  100 Hz to 20 kHz ±2.5 dB @ 70 or 100 Volts
Scan Frame Color Color S/N Ratio, Digital & Analog Line Outputs: 
Resolution >108 dB, 1 kHz, A-weighted (digital source);
Type Rate Sampling Depth
>103 dB, 1 kHz, A-weighted (analog line source)
24 Hz 4:4:4 30 bit
4096x2160 DCI 4K S/N Ratio, Speaker Output: 
30 Hz 4:4:4 24 bit 98 dB @ 25 Watts into 8 Ohms, 1 kHz, A-weighted;
&
30 Hz 4:2:2 36 bit 96 dB @ 25 Watts into 4 Ohms, 1 kHz, A-weighted
Progressive 3840x2160 4K UHD
60 Hz 4:2:0 24 bit THD+N, Digital & Analog Line Outputs: 
<0.002%, 20 Hz to 20 kHz (digital source);
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
<0.005%, 20 Hz to 20 kHz (analog line source);
1920x1080 HD1080p 60 Hz 4:4:4 36 bit <0.05%, 20 Hz to 20 kHz (microphone source)
Interlaced THD+N, Speaker Output: 
(excluded on 1920x1080 HD1080i 30 Hz 4:4:4 36 bit <0.1%, 1 kHz @ 25 Watts into 4 or 8 Ohms;
HDMI outputs) <0.7%, 20 Hz to 20 kHz @ 25 Watts into 4 or 8 Ohms
NOTE: Common resolutions are shown; other custom resolutions are Stereo Separation, Digital & Analog Line Outputs: 
supported at pixel clock rates up to 300 MHz. Interlaced video is not >108 dB (digital source);
supported on the HDMI outputs. >103 dB (analog source)
Stereo Separation, Speaker Output: 
Streaming Decoder >65 dB @ 25 Watts, 1 kHz
Channel Separation, Digital Outputs: 
Video Formats:  H.264 (MPEG-4 part 10 AVC), MJPEG >108 dB (digital source);
Audio Format:  AAC stereo >103 dB (analog source)
Bitrates:  Up to 25 Mbps Channel Separation, Analog Line Outputs: 
Resolutions:  Up to 1080p60 >103 dB
AirMedia [1]
Speaker Output Modes:  4Ω/8Ω stereo, 70V mono, or 100V mono
Speaker Amplifier Output Power: 
Users:  Supports up to 32 users (presentation device connections) 25 Watts RMS per channel @ 8 Ohms, 4 Ohms tolerant
Client Software OS Support:  Windows 7, Windows 8, Window 10, 50 Watts RMS @ 70 or 100 Volts
Mac® OS X® (versions 10.10 through 10.13)
Audio – Microphone Inputs
Client Software Video Frame Rate:  30 fps, audio supported
Mobile App OS Support:  Apple® iOS, Android Typical of 6 microphone input channels (Mic/Line 1 – 6):
Full Screen Device Mirroring:  Shares the screen image and audio from Input Signal Types:  Mono analog mic or line level
an Apple iOS, Android, Mac OS X, or Windows device Phantom Power:  Enable/Disable per channel
Resolutions:  800x600@60Hz, 1024x768@60Hz, 1280x720@60Hz Gain:  0 to +60 dB Gain adjustment in 3dB increments, plus Mute
(720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz,
Delay:  0.0 to 85.0 ms
1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,
1600x1200@60Hz, 1920x1080@60Hz (1080p60), 1920x1200@60Hz EQ Center Frequencies:  50 to 200 Hz (Band 1), 200 to 800 Hz (Band 2),
800 to 3.2k Hz (Band 3), 3.2k to 12.8k Hz (Band 4)
Audio Format:  Stereo
EQ Gain:  ±12.0 dB per band

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

High-Pass Filter:  On or Off Formats:  2-channel LPCM

Gating Threshold:  -80 to 0 dB Digital Output Mix Select 1 – 2:  Selects which mix is routed to the
Gating Depth (Attenuation):  -80 to 0 dB corresponding output
Gating Attack:  1 to 250 ms Typical of 2 digital output mixers:
Gating Release:  1 to 1000 ms Mic 1 – 6:  -80 to +10 dB Level adjustment range, plus Mute and Pan
Compression Threshold:  -80 to 0 dB Mics Master:  -80 to +10 dB Level adjustment range, plus Mute
Compression Ratio:  1:1 to 10:1 Source:  -80 to +10 dB Level adjustment range, plus Mute and Balance
Compression Attack:  1 to 250 ms Master Volume:  -80 to +10 dB Level adjustment range, plus Mute
Compression Release:  1 to 1000 ms Mixer Presets:  1 through 5
Compression Curve:  Hard or soft knee
Connectors – Audio/Video Inputs
Audio – Source Inputs
AUD IN 1 – 5:  (5) 5-pin 3.5 mm detachable terminal blocks;
Input Signal Types:  HDMI (Dual-Mode DisplayPort compatible [4]) on Inputs Balanced/unbalanced stereo line-level analog audio inputs;
1-6, DM 8G+ & HDBaseT on Inputs 7 & 8, streaming & AirMedia on Input 9 Input Impedance: 24k Ohms balanced/unbalanced;
(LAN), analog 2-channel on Aud In 1-5 Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
Analog Formats:  Stereo 2-channel
Digital Formats:  2-channel LPCM MC1/LN1 – MC6/LN6:  (6) 5-pin 3.5 mm detachable terminal blocks;
Input Compensation:  ±10.0 dB, adjustable per input Comprises (6) balanced microphone/line audio inputs;
Balanced Mic Input Level: -60 to 0 dBV, 1 Vrms maximum;
Audio – Analog Line & Speaker Outputs Balanced Line Input Level: -31 to +11 dBV, 3.7 Vrms maximum;
Unbalanced Line Input Level: -37 to +5 dBV, 1.85 Vrms maximum;
Typical of 1 analog line/speaker output (Program Out & Speaker Output) and Mic Input Impedance: 3.9k Ohms balanced;
2 analog line outputs (Aux Out 1 – 2):
Line Input Impedance: 19k Ohms balanced, 9.5k Ohms unbalanced;
Output Signal Type/Format:  Stereo 2-channel
Phantom Power: 48 Volts DC, software enabled/disabled per channel
Mic 1 – 6:  -80 to +10 dB Level adjustment range, plus Mute and Pan
Mics Master:  -80 to +10 dB Level adjustment range, plus Mute HDMI 1 – 6 INPUTS:  (6) HDMI Type A connectors, female;
Source:  -80 to +10 dB Level adjustment range, plus Mute and Balance Digital video/audio inputs;
Master Volume:  -80 to +10 dB Level adjustment range, plus Mute (DVI and Dual-Mode DisplayPort compatible [4])
and Mono DM INPUT 7 – 8:  (2) 8-pin RJ45 connectors, female, shielded;
Mixer Presets:  1 through 5 DM 8G+ inputs, HDBaseT compliant;
Bass:  ±12.0 dB PoDM+ PSE ports (HDBaseT PoE+ compatible) [8];
Treble:  ±12.0 dB Each connects to the DM 8G+ output of a DM transmitter or other DM
Equalization:  10-band graphic + 4-band parametric device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or
GEQ Center Frequencies:  31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz Crestron DM-CBL-ULTRA cable [7]
GEQ Gain:  ±12.0 dB per band
Connectors – Audio/Video Outputs
PEQ Center Frequencies:  10 to 22000 Hz per band
PEQ Gain:  -36.0 to +24.0 dB per band SPEAKER OUTPUT 4Ω/8Ω L – R:  (2) 2-pin 7.62 mm 15A detachable
PEQ Bandwidth:  0.02 to 3.50 octaves per band terminal blocks;
PEQ Types:  Peaking EQ, High Pass, Low Pass, High Shelf, Low Shelf, Notch 4-8 Ohm stereo speaker-level audio output;
Delay:  0.0 to 85.0 ms Wire Size: Terminals accept up to 14 AWG (2.5 mm2);
Limiter Threshold:  -80 to 0 dB Output Power: 25 Watts RMS per channel stereo at 8 Ohms, 4 Ohms tolerant
Limiter Ratio:  1:1 to 10:1
Limiter Attack:  1 to 250 ms SPEAKER OUTPUT 70/100V:  (1) 2-pin 7.62 mm 15A detachable
terminal block;
Limiter Hold:  1 to 200 ms
Transformer-isolated 70 or 100 Volt mono speaker-level audio output;
Limiter Release:  1 to 1000 ms
Wire Size: Terminals accept up to 14 AWG (2.5 mm2);
Limiter Curve:  Hard or soft knee
Output Power: 50 Watts RMS mono at 70 or 100 Volts;
EQ Presets:  1 through 10 (includes Delay and Limiter settings)
Note: 4Ω/8Ω and 70/100V outputs are mutually exclusive
Audio – Digital Outputs PROG OUT:  (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Typical of 4 digital outputs (HDMI Output 1 – 2 & DM Output 3 – 4):
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Output Signal Types:  HDMI (DVI compatible [4]) on Outputs 1 & 2,
DM 8G+ & HDBaseT on Outputs 3 & 4 Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

AUX OUT 1 – 2:  (2) 5-pin 3.5 mm detachable terminal blocks; CONTENT LAN IN 9:  (1) 8-pin RJ45 connector, female;
Balanced/unbalanced stereo line-level audio outputs; 10Base-T/100Base-TX Ethernet port;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Provides a dedicated LAN connection for streaming input & AirMedia [1]
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced CONTROL SUBNET:  (1) 8-pin RJ45 connector, female;
HDMI 1 – 2 OUTPUTS:  (2) HDMI Type A connectors, female; 10Base-T/100Base-TX/1000Base-T Ethernet port;
Digital video/audio outputs; PoE PSE (Power Sourcing Equipment) port [8];
(DVI compatible [4]) Provides a dedicated local network for Crestron devices
DM OUTPUT 3 – 4:  (2) 8-pin RJ45 connectors, female, shielded; LAN:  (1) 8-pin RJ45 connector, female;
DM 8G+ outputs, HDBaseT compliant; 10Base-T/100Base-TX/1000Base-T Ethernet port
PoDM+ PSE ports (HDBaseT PoE+ compatible) [8]; COMPUTER (front):  (1) USB Type B connector, female;
Each connects to the DM 8G+ input of a DM receiver or other DM device, USB computer console port (for setup only)
or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron
DM-CBL-ULTRA cable [7] Controls & Indicators

Connectors - Networking, Control, & Power PWR:  (1) Green LED, indicates operating power supplied from AC
power line
IR - SERIAL OUT 1 – 4:  (4) 2-pin 3.5 mm detachable terminal blocks;
NET:  (1) Yellow LED, indicates Cresnet bus activity
IR/Serial output ports;
LAN:  (1) Yellow LED, indicates Ethernet activity
IR output up to 1.2 MHz;
HW-R:  (1) Recessed pushbutton for hardware reset, reboots the
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud control system
IR IN:  (1) 3-pin 3.5 mm detachable terminal block SW-R:  (1) Recessed pushbutton for software reset, restarts the
For connection of the CNXRMIRD IR Receiver [6]; software program
Allows control from IR wireless remotes using RC-5 command set LCD Display:  (1) Green LCD alphanumeric, adjustable backlight, 2 lines
x 20 characters per line, displays input/outputs by name, volume levels,
INPUT 1 – 4:  (1) 5-pin 3.5 mm detachable terminal block; setup menus, signal routing, device info, and other system information
Comprises (4) programmable digital inputs; SOFTKEYS:  (4) Pushbuttons for activation of LCD driven functions and
Input Voltage Range: 0 to 24 Volts DC, referenced to GND; passcode entry
Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band; MENU:  (1) Pushbutton, steps the menu back one level
Input Impedance: 10k Ohms at >5 Volts, 1M Ohms at <5 Volts; , ‚:  (2) Pushbuttons, for scrolling up or down through the menu and
Pull-up Resistor: 2.2k Ohms per input adjusting menu parameters
RELAY 1 – 4:  (1) 8-pin 3.5 mm detachable terminal block; ENTER:  (1) Pushbutton, executes the highlighted menu or value
Comprises (4) normally open, isolated relays; VOLUME:  (1) Continuous turn rotary encoder, adjusts menu parameters,
Rated 1 Amp, 30 Volts AC/DC; defaults to Program audio volume
MOV arc suppression across contacts MUTE:  (1) Pushbutton and red LED, mutes the Program audio output
INFO:  (1) Pushbutton and red LED, selects INFO mode to view AV and
COM A – B:  (2) DB9 connectors, male; device info
Bidirectional RS-232 ports;
ROUTE:  (1) Pushbutton and red LED, selects ROUTE mode to allow
Up to 115.2k baud, hardware and software handshaking support routing changes
NET:  (4) 4-pin 3.5 mm detachable terminal blocks; VIEW:  (1) Pushbutton and red LED, selects VIEW mode to view
Cresnet Master ports, paralleled; current routing
Available Cresnet Power: 10 Watts INPUT 1 – 9:  (9) Pushbuttons and red LEDs, each selects the
corresponding video input for routing
PoDM+ INPUT PWR:  (1) Combo D-Sub 7w2 connector, male;
OUTPUT 1 – 4, PROG, AUX 1 – 2:  (7) Pushbuttons and red LEDs, each
48 Volt DC power input for PoDM power supply [8]; selects the corresponding video or audio output for routing
Enables PoDM+ power sourcing on each DM INPUT/OUTPUT port; SPEAKER OUTPUT (rear):  (1) 3-position slide switch, selects the
Enables PoE power sourcing on the CONTROL SUBNET port amplifier output configuration
SERVICE:  (1) USB Type B connector, female; DM INPUT 7 – 8 (rear):  (4) LEDs, green LEDs indicate DM link status,
For factory use only amber LEDs indicate video and HDCP signal presence, for each
corresponding port
100-240V~ 6.0A 50/60Hz:  (1) IEC 60320 C14 main power inlet;
DM OUTPUT 3 – 4 (rear):  (4) LEDs, green LEDs indicate DM link status,
Mates with removable power cord, included amber LEDs indicate video and HDCP signal presence, for each
G:  (1) 6-32 screw; corresponding port
Chassis ground lug

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

CONTENT LAN IN 9 (rear):  (2) LEDs, (1) green and (1) amber, for indication Maximum DM 8G+ Cable Lengths
of Ethernet speed, activity, and link status
CONTROL SUBNET (rear):  (2) LEDs, (1) green and (1) amber, for indication Cable Type: DM-CBL-ULTRA DM-CBL-8G CAT5e
of Ethernet speed, activity, and link status DM® Ultra DM 8G® (or better) [7]
LAN (rear):  (2) LEDs, (1) green and (1) amber, for indication of Ethernet Resolution: Cable Cable
speed, activity, and link status
1080p60 Full HD
Power 1920x1200 WUXGA 330 ft 330 ft
1600x1200 UXGA (100 m) (100 m)
Main Power:  6 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption:  93 Watts typical, 72 Watts idle 2048x1080 DCI 2K 330 ft
Available Cresnet Power:  10 Watts 2560x1440 WQHD (100 m)
Power over DM (PoDM):  IEEE 802.3at compliant PoDM+ PSE (Power 2560x1600 WQXGA 230 ft 165 ft
Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts 3840x2160 4K UHD (70 m) (50 m)
to power one PoDM (Class 0-3) or PoDM+ (Class 4) PD (Powered Device) [8]
Power over HDBaseT:  IEEE 802.3at PoE+ compliant PSE (Power Sourcing 4096x2160 DCI 4K
Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts to power
one HDBaseT PoE or PoE+ PD (Powered Device) [8]
MODELS & ACCESSORIES
Power over Ethernet (PoE):  IEEE 802.3at compliant PoE PSE (Power
Sourcing Equipment), the CONTROL SUBNET port supplies up to 15.4 Watts Available Models
to power one PoE (Class 0-3) PD (Powered Device) [8]
DMPS3-4K-350-C:  3-Series® 4K DigitalMedia™ Presentation System 350
PoDM Power Supply:  Compatible with model PW-4830DUS or
DM-PSU-3X8-RPS [6] Available Accessories
Environmental SW-DMPS3-AIRMEDIA:  AirMedia® License
TSW-760 Series:  7” Touch Screen
Temperature:  41° to 104° F (5° to 40° C) TSW-760-NC Series:  7” Touch Screen without Camera, Microphone, or
Humidity:  10% to 90% RH (non-condensing) PinPoint™ Beacon
Heat Dissipation:  317 BTU/hr typical, 246 BTU/hr idle TSW-1060 Series:  10” Touch Screen
TSW-1060-NC Series:  10” Touch Screen without Camera, Microphone, or
Enclosure
PinPoint™ Beacon
Chassis:  Metal, black finish, fan-cooled, vented sides MP-B10 Series:  Media Presentation Button Panel B10
Front Panel:  Metal, black finish with polycarbonate label overlay TT-100, TT-101, TT-110, & TT-111 Series:  Crestron Connect It™
Mounting:  Freestanding or 3 RU 19-inch rack-mountable (adhesive feet Cable Caddies
and rack ears included) PW-4830DUS:  150W PoDM Power Pack
DM-PSU-3X8-RPS:  PoDM+ Redundant Power Supply
Dimensions DM-TXRX-100-STR:  HD Streaming Transmitter/Receiver
DM-RMC-4K-100-C-1G Series:  Wall Plate 4K DigitalMedia 8G+® Receiver
Height:  5.20 in (133 mm) without feet & Room Controller 100
Width:  17.28 in (439 mm); DM-RMC-4K-100-C:  4K DigitalMedia 8G+® Receiver & Room
19.00 in (483 mm) with rack ears Controller 100
Depth:  15.75 in (400 mm) DM-RMC-4K-SCALER-C:  4K DigitalMedia 8G+® Receiver & Room
Controller w/Scaler
Weight
DM-RMC-4K-SCALER-C-DSP:  4K DigitalMedia 8G+® Receiver & Room
15.5 lb (7.1 kg) Controller w/Scaler & Downmixing
DM-RMC-200-C:  DigitalMedia 8G+® Receiver & Room Controller 200
Compliance DM-RMC-SCALER-C:  DigitalMedia 8G+® Receiver & Room Controller
w/Scaler
UL Listed for US & Canada, IC, CE, FCC Part 15 Class A digital device DM-TX-4K-100-C-1G Series:  Wall Plate 4K DigitalMedia 8G+®
Transmitter 100
DM-TX-200-C-2G:  Wall Plate DigitalMedia 8G+® Transmitter 200
DM-TX-4K-202-C:  4K DigitalMedia 8G+® Transmitter 202
DM-TX-4K-302-C:  4K DigitalMedia 8G+® Transmitter 302
DM-TX-201-C:  DigitalMedia 8G+® Transmitter 201
DM-TX-401-C:  DigitalMedia 8G+® Transmitter 401

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

USB-EXT-DM-LOCAL:  USB over Ethernet Extender with Routing, 2.  Some features and functions described in this spec sheet may not be supported using
Host Module .AV Framework. For a complete list of capabilities and options supported by .AV Framework,
please visit: http://www.crestron.com/avframework.
USB-EXT-DM-REMOTE:  USB over Ethernet Extender with Routing, 3.  The streaming and AirMedia inputs are mutually exclusive. Only one or the other can be used
4-Port Device Module at one time. Streaming network traffic can be routed through the primary LAN port or isolated
AMP-150 Series:  Single-Channel Modular Power Amplifiers, 50W, 70V through the CONTENT LAN port.
4.  HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or
or 100V Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
AMP-225:  Dual-Channel Modular Power Amplifier, 25W/Ch., 4/8 Ohm 5.  The HDMI outputs do not pass 3D signals. On these outputs, 3D signals are automatically
AMP-1200 Series:  Single-Channel Modular Power Amplifiers, 200W, 70V converted to 2D, then scaled and output as 2D. 3D signals can be passed through the
DM 8G+ outputs.
or 100V 6.  Item(s) sold separately.
AMP-2100 Series:  Dual-Channel Modular Power Amplifiers, 100W/Ch.; 7.  The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon
4/8 Ohm, 70V, or 100V the type of cable and resolution of the video signal. Refer to the “Maximum DM 8G+ Cable
Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia
AMP-2210HT:  2x210W Commercial Power Amplifier, 4/8Ω or Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths
High-Power 70V as CAT5e. Shielded cable and connectors are recommended to safeguard against
AMP-2210S:  2x210W Commercial Power Amplifier, 4/8Ω unpredictable environmental electrical noise which may impact performance at resolutions
above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete
AMP-2210T:  2x210W Commercial Power Amplifier, 4/8Ω or 70/100V system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for
AMP-3210S:  3x210W Commercial Power Amplifier, 4/8Ω connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
AMP-3210T:  3x210W Commercial Power Amplifier, 4/8Ω or 70/100V 8.  Enabling PoDM and PoE power sourcing requires an external power supply, model
PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that
GLS-ODT-C-CN:  Dual-Technology Occupancy Sensor with Cresnet® occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT
GLS-OIR-C-CN:  Passive Infrared Occupancy Sensor with Cresnet® PoE+ powered device. Be aware that the CONTROL SUBNET port is limited to regular PoE
SW-FUSION-C-3:  Crestron Fusion® Cloud (Class 0-3), which delivers a maximum of 12.95 Watts to the powered device. Any wiring
that is connected to a PoDM or PoE PSE port is for intra-building use only and should not be
SW-FUSION-P-L:  Crestron Fusion® On-premises connected to a line that runs outside of the building in which the PSE is located.
CRESTRON-APP Series:  Crestron® App for Mobile Devices 9.  Manages the routing of USB HID signals between peripheral DM devices that are equipped
with USB HID ports. The USB ports onboard the DMPS3-4K-350-C are not usable for USB
XPANEL:  XPanel – Crestron Control® for Computers signal routing. Also programmable to manage the routing of USB signals between Crestron
SW-3SERIES-BACNET-50+:  BACnet™/IP Support for 3-Series® USB over Ethernet Extender modules (USB-EXT-DM, sold separately). Refer to the
CSP-LIR-USB:  IR Learner USB-EXT-DM spec sheet for more information.
10.  License required. The DMPS3-4K-350-C supports a maximum of 500 BACnet objects when
CNSP-XX:  Custom Serial Interface Cable dedicated for BACnet use only. Actual capabilities are contingent upon the overall program
IRP2:  IR Emitter size and complexity.
CNXRMIRD:  IR Receiver
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
DM-CONN-ULTRA-RECP Series:  DigitalMedia™ Ultra Keystone RJ45 Jack contact the Crestron sales representative for your area. A list of sales representatives is available
DM-CBL-ULTRA-PC Series:  DigitalMedia™ Ultra Patch Cables online at http://www.crestron.com/salesreps or by calling 800-237-2041.
DM-CBL-ULTRA Series:  DigitalMedia™ Ultra Cable
The specific patents that cover Crestron products are listed online at: http://patents.crestron.com.
DM-CONN-20:  Connectors for DM-CBL-ULTRA Series
DM-CBL-8G Series:  DigitalMedia 8G™ Cable Certain Crestron products contain open source software. For specific information, please visit
DM-8G-CONN-100:  Connectors for DM-CBL-8G Series http://www.crestron.com/opensource.

DM-8G-CRIMP:  Crimping Tool for DM-8G-CONN-100 Crestron, the Crestron logo, 3-Series, 3-Series Control System, AirMedia, Auto-Locking,
DM-8G-CONN-WG-100:  Connectors with Wire Guide for DM-CBL-8G Series .AV Framework, Cresnet, Crestron Connect It, Crestron Control, Crestron Fusion, DigitalMedia,
DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, PinPoint, QuickSwitch HD, and Smart Graphics
DM-8G-CRIMP-WG:  Crimping Tool for DM-8G-CONN-WG-100
are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States
CRESNET Series:  Cresnet® Control Cable and/or other countries. BACnet is either a trademark or registered trademark of American
CBL Series:  Crestron® Certified Interface Cables Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in the United States and/
or other countries. Apple, iPad, iPhone, Mac, MacBook, and OS X are either trademarks or
MP-WP Series:  Media Presentation Wall Plates registered trademarks of Apple Inc. in the United States and/or other countries. Blu-ray is either
MPI-WP Series:  Media Presentation Wall Plates - International Version a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or
other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in the
United States and/or other countries. Android is either a trademark or registered trademark of
Notes: Google Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo
are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/
1.  To enable the onboard AirMedia gateway requires the purchase of one SW-DMPS3-AIRMEDIA or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of
license. To obtain the license, or for any questions regarding AirMedia activation, please visit HDMI Licensing LLC in the United States and/or other countries. Microsoft, Excel, PowerPoint,
https://www.crestron.com/dmps-airmedia-activation. To purchase the DMPS3-4K-350-C with and Windows are either trademarks or registered trademarks of Microsoft Corporation in the
AirMedia pre-activated (no license required), see model DMPS3-4K-350-C-AIRMEDIA. United States and/or other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi
Wireless presentation using AirMedia requires an external wireless access point (not Alliance in the United States and/or other countries. Other trademarks, registered trademarks,
included). A wired Ethernet connection may also be used. AirMedia network traffic can be and trade names may be used in this document to refer to either the entities claiming the marks
routed through the primary LAN port or isolated through the CONTENT LAN port. Performance and names or their products. Crestron disclaims any proprietary interest in the marks and names
quality for full-motion video content is dependent upon network performance and sending of others. Crestron is not responsible for errors in typography or photography. Specifications are
device performance. AirMedia support in the DMPS3-4K-350-C includes the same essential subject to change without notice. ©2017 Crestron Electronics, Inc.
functionality as the AM-101 AirMedia Presentation Gateway with the exclusion of quad view,
moderator mode, and remote view.

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

AV SIGNAL FLOW DIAGRAMS

CLIP

PHANTOM
MC 1
POWER
PRE DLY GATE HPF EQ COMP M1 (TO OUTPUT MIXERS)
LN 1 PAD

Microphone Inputs (Typical of 6)

AUD 1 PROGRAM
SOURCE M1 VU
M2
AUD 5 M3
PROG
HDMI 1 M4 BASS & MONO/
M5 OUTPUT GEQ PEQ LIM VOL MUTE DLY PROG
TREBLE STEREO
SEL M6 MIXER
HDMI 6
DM 7
DM 8 AMP SPEAKER
Streaming
& AirMedia

AUD 1 AUX 1
SOURCE M1
M2 VU
AUD 5
M3 AUX 1
HDMI 1 M4
OUTPUT BASS & MONO/
M5 GEQ PEQ LIM VOL MUTE DLY AUX 1
SEL MIXER TREBLE STEREO
HDMI 6 M6
DM 7
DM 8
Streaming
& AirMedia

AUD 1 AUX 2
SOURCE M1 VU
M2
AUD 5
M3 AUX 2
HDMI 1 M4
OUTPUT BASS & MONO/
M5 GEQ PEQ LIM VOL MUTE DLY AUX 2
SEL MIXER TREBLE STEREO
HDMI 6 M6
DM 7
DM 8
Streaming
& AirMedia
Analog Audio Outputs

AUD 1 DIGITAL OUTPUT MIX

M1 SELECT HDMI 1
MIX 1 SOURCE VU
M2
AUD 5 M3
DIGITAL
HDMI 1 M4
M5 OUTPUT VOL MUTE
SEL M6 MIXER 1
HDMI 6
MIX
DM 7 SELECT HDMI 2
DM 8
Streaming
& AirMedia

AUD 1 DIGITAL OUTPUT

M1 MIX
MIX 2 SOURCE VU DM 3
M2 SELECT
AUD 5 M3
DIGITAL
HDMI 1 M4
M5 OUTPUT VOL MUTE
M6 MIXER 2
SEL
HDMI 6
DM 7 MIX
SELECT DM 4
DM 8
Streaming
& AirMedia
Digital Audio Outputs

crestron.com | 800.237.2041
DMPS3-4K-350-C  3-Series® 4K DigitalMedia™ Presentation System 350

HDMI 1
HDMI 2
SCALER HDMI 1
HDMI 3
HDMI 4 SCALER HDMI 2
9X4
HDMI 5
MATRIX
HDMI 6 DM 3
DM 7

DM 8 DM 4
Streaming
& AirMedia
Video

DIMENSIONAL DIAGRAM

|
Crestron Electronics, Inc.  15 Volvo Drive    Rockleigh, NJ 07647 All brand names, product names and trademarks are the property of their respective owners.
©2017 Crestron Electronics, Inc.
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1903
www.crestron.com Specifications subject to change without notice. Revised 12/04/17