Solution of the theoretical problem 1

Back-and-Forth Rolling of a Liquid-Filled Sphere

1. （ 1 ） Let I1 and I 2 denote the rotational inertia of the spherical shell and W in

solid state respectively, while I be the sum of I1 and I 2 . The surface mass density of

m
the spherical shell is   4 r 2 . Cut a narrow zone from the spherical shell

perpendicular to its diameter, which spans a small angle d with respect to the center
of the sphere C, while the spherical zone makes an angle  with the diameter of the
spherical shell, which is called C axes hereafter, as shown in Fig. 1. The rotational

inertia of the narrow zone about the C axis is 2 r sin  ( rd ) (r sin  ) , therefore
2

integral over the whole spherical shell gives

 2 2
I1   2 r sin  (rd ) (r sin  ) 2  mr . (1A.1)
0 3

dα r
）α
C

Figure 1

M
The volume density of W is   4 r 3 / 3 . By using above result for the spherical

zone it can be seen that the rotational inertia of the solid W about the C axis is
r 2 2 2
I2   r '  4 r '2 dr '  Mr 2 . (1A.2)
0 3 5

2 2 2
Then, I  I1  I 2  mr  Mr 2 . (1A.3)
3 5
（ 2 ） According to the Newton’s second law we can derive the translational motion

equation of the center of mass for the sphere along the tangent of the bowl,

(m  M )( R  r )&
& (m  M ) g  f ,
(1A.4)

θ
R

Figure 2 E
C
C ϕ f

where  (  1) denotes the angular position of the center of mass of the sphere
O as
(m+M)g
shown in Fig.2, and f is the frictional force acting on the sphere by the inside wall of
the bowl. From the rotational dynamics, we have,

2 2
fr   I&
& ( mr 2  Mr 2 )&
&, (1A.5)
3 5

where  is the angular position of the reference radius CE with respect to the starting

position. Assumed constraint of pure rolling on the motion of the sphere reads,

( R  r )&
& r&
&, (1A.6)

Equations (1A.4)-(1A.6) lead to

This is a motion equation of the type of simple harmonic oscillator. Therefore, we

mM g
1  (1A.7)
5m / 3  7 M / 5 R  r ，

R  r 5m 3  7 M / 5
T1  2 . (1A.8)
g mM

2. This case can be treated similarly, except taking that the ideal liquid does not rotate
into consideration. Therefore Eqs. (1A.4) and (1A.6) are still applicable, while Eq.
(1A.5) needs to be modified as

2
fr   I1&
&  mr 2&
&. (1A.9)
3

Equations (1A.4), (1A.6), and (1A.9) result in

(5m / 3  M )( R  r )&
& (m  M ) g .

Then, the angular frequency and period of the sphere rolling back-and-forth are
obtained respectively.

mM g
2  , (1A.10)
5m / 3  M Rr

R  r 5m / 3  M
T2  2 . (1A.11)
g mM

3. The time taken by the sphere from position A0 to equilibrium position O is T2 / 4 ,

T1 / 4 from O to A0' , and T2 / 4 from A0' to O, T1 / 4 from O to A1 . Although the angular

1 Rr  5m / 3  7 M / 5 5m / 3  M 
T3  (T1  T2 )     .
 (1A.12)
2 g  mM mM 

Next, we calculate the change of the angular amplitude. When the sphere passes

through the equilibrium position O after it rolled down from the initial position A0 ,

the velocity of its center is

mM
vC  2 ( R  r ) 0  g ( R  r ) 0 . (1A.13)
5m / 3  M

Now the angular velocity of the spherical shell rotating about the C axis is

vC  0 mM
  g ( R  r ). (1A.14)
r r 5m / 3  M

where C axis is the axis of rotation through the center of the sphere and perpendicular
to the paper plane of Fig.2. When W behaves as liquid (before it changes into solid
state), the angular momentum of the sphere relative to point O is

L  (m  M )vC r  I1. (1A.15)

When W changes suddenly into solid state, due to the fact that both gravitational and
frictional force pass through point O, the angular momentum of the sphere relative to
O is conserved, we have

L  (m  M )vC r  I1  [ I  (m  M )r 2 ] '. (1A.16)

where  and  ' represent the angular velocity of the sphere immediately before and
after passing through point O. Therefore
 (m  M )vC r  I1 vC 5m / 3  M
'   , (1A.17)
I  (m  M )r 2 r 5m / 3  7 M / 5

while after passing through point O the velocity of the center of the sphere becomes

5m / 3  M
vC'  r  vC . (1A.18)
5m / 3  7 M / 5

'
Once the sphere reaches the left highest position A0 corresponding to the left angular

amplitude  0 we have
'

vC '  1 ( R  r ) 0 '.

However, vC  2 ( R  r ) 0 .

From above two expressions we obtain

vc' 2 5m / 3  M
 0'  0  0 . (1A.19)
vC 1 5m / 3  7 M / 5

'
Similarly we can treat the process that the sphere rolls from position A0 back to A1 ,

the second highest position on the right, corresponding to the second right angular

amplitude 1, and obtain

1 0 '
 .
0 ' 0

 0' 2 5m / 3  M
Then, 1   0 .
 0 5m / 3  7 M / 5

Following the similar procedure repeatedly we finally obtain: