H55MX S - Series Manual

H55MX-S Series Motherboard
User’s Manual
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modified at any time, Foxconn does not obligate
itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for H55MX-S Series motherboard.
P/N: 3A2220K00-000-G
Symbol description:
N
IO
Caution: refers to important information that can help you to use motherboard
!
UT
CA
better, and tells you how to avoid problems.

NING
AR !
W
Warning: indicating a potential risk of hardware damage or physical injury may
exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could other-
wise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
© All rights reserved.

All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical motherboard for specific features.
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD

66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product

Motherboard H55MX-S
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

disturbance characteristics of information technology
equipment
■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low
voltage supply systems for equipment with rated current
<= 16A
■ EN 55024/A2:2003 Information technology equipment-Immunity
characteristics limits and methods of measurement
Signature : Place / Date : TAIPEI/2009
Printed Name : James Liang

Declaration of conformity
Trade Name: FOXCONN

Model Name: H55MX-S
Responsible Party: PCE Industry Inc.
Address: 458 E. Lambert Rd.
Fullerton, CA 92835
Telephone: 714-738-8868
Facsimile: 714-738-8838
Equipment Classification: FCC Class B Subassembly

Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested to comply with FCC standards.
Signature : Date : 2009

Installation Precautions
NING
AR !
W
■ Electrostatic discharge (ESD) is the sudden and momentary electric current

that flows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■ Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
N
IO
!
UT
CA
Please carefully read the following procedures to install your computer :

■ It is suggested to select high-quality, certified fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
■ We cannot guarantee that your system can operate normally when your
CPU is overclocked. Normal operation depends on the overclocking capac-
ity of your device.
■ If there is any, when connecting USB, audio, 1394a, RS232 COM, IrDA or
S/PDIF cables to the internal connectors on the motherboard, make sure
their pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
■ When handling the motherboard, avoid touching any metal leads or connec-
tors.
■ If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
■ Before turning on the power, please make sure the power supply AC input
voltage setting has been configured to the local standard.
■ To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certified computer technician.
Table of Contents
Chapter 1 Product Introduction

Product Specifications...............................................................................2
Layout.......................................................................................................4
Back Panel Connectors.............................................................................5
Chapter 2 Hardware Install
Install the CPU and CPU Cooler...............................................................8
Install the Memory................................................................................... 11
Install an Expansion Card.......................................................................13
Install other Internal Connectors.............................................................14
Jumpers...................................................................................................18
Chapter 3 BIOS Setup
Enter BIOS Setup....................................................................................21
Main Menu..............................................................................................21
System Information.................................................................................23
Advanced BIOS Features.......................................................................25
Fox Central Control Unit..........................................................................28
Advanced Chipset Features....................................................................32
Integrated Peripherals.............................................................................33
Power Management Setup......................................................................37
PC Health Status.....................................................................................39
BIOS Security Features..........................................................................40
Load Optimal Defaults.............................................................................41
Save Changes and Exit...........................................................................41
Discard Changes and Exit.......................................................................41
Chapter 4 CD Instruction
Utility CD content....................................................................................43
Install driver and utility.............................................................................44
FOX ONE
Main Page.........................................................................................46
CPU Control......................................................................................50
Frequency Control.............................................................................52
Limit Setting......................................................................................53
Voltage Control..................................................................................55
Fan Control.......................................................................................56
FOX LiveUpdate
Local Update.....................................................................................57
Online Update...................................................................................59
Configure . ........................................................................................62
About & Help.....................................................................................64
FOX LOGO..............................................................................................65
FOX DMI.................................................................................................66
Technical Support :
Support
Website :
http://www.foxconnchannel.com
Support Website :
http://www.foxconnsupport.com
Worldwide online contact Support :

http://www.foxconnsupport.com/inquiry.aspx
CPU Support List :

http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List :

http://www.foxconnsupport.com/complist.aspx
Thank you for buying Foxconn H55MX-S Series motherboard.
Foxconn products are engineered to maximize computing power,
providing only what you need for break-through performance.
With advanced overclocking capability and a range of connectivity

features for today multi-media computing requirements, H55MX-S
enables you to unleash more power from your computer.
This chapter includes the following information:

■ Product Specifications
■ Layout
■ Back Panel Connectors
1-1 Product Specifications
CPU Support LGA 1156 socket Intel® CPU:

1
Intel® CoreTM i7, CoreTM i5 and CoreTM i3 processors

DMI Bus Full duplex up to 10Gb/s each direction
Chipset Intel® H55
Memory 2 x 240-pin DDR3 DIMM sockets
Support up to 8GB of system memory
Dual channel DDR3 1333/1066MHz architecture
Audio Realtek 8-channel audio chip
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF out
Support Jack-Sensing function
LAN Realtek 10/100/1000Mb/s LAN chip
Expansion Slots 1 x PCI Express x16 slots
1 x PCI Express x4 slots
2 x PCI slot
Onboard Serial ATA 6 x SATA connectors
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing)
USB Support hot plug
Supports up to 12 x USB 2.0 ports (6 rear panel ports, 3 onboard USB head-
ers supporting 6 extra ports)
Support USB 2.0 protocol up to 480Mb/s
Internal Connectors 1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
1 x CPU fan header (4-pin)
2 x System fan headers (4-pin)
1 x Floppy Disk drive connector
1 x Front Audio connector
1 x SPDIF-OUT connector
1 x Speaker connector
3 x USB 2.0 connectors (supporting 6 x USB devices)
1 x Front Panel connector
6 x SATA connectors
1 x TPM connector
1 x COM connector
1 x IrDA connector
Back Panel 1 x PS/2 port
Connectors 1 x Serial port
6 x USB 2.0 ports
1 x DVI-I port
1 x HDMI port
1 x Optical S/PDIF out port

1 x RJ-45 LAN port
8-channel Audio Ports
Hardware Monitor System voltage detection
1
CPU/System temperature detection
CPU/System fan speed detection
CPU/System overheating shutdown
CPU/System fan speed control
PCI Express x4 Support 1GB/s (2GB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x16 Gen2.0 Support 8GB/s (16GB/s concurrent) bandwidth
Low power consumption and power management features
Green Function Support ACPI (Advanced Configuration and Power Interface)
Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled Software FOX ONE
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating System Support for Microsoft® Windows® Vista/XP
Form Factor Micro ATX Form Factor, 9.6 inches x 8.6 inches (24.4cm x 21.8cm)

1-2 Layout
6 5 4 3 2 1
1
23
22
10
21
20
11
19
12
13 14 15 16 17 18
1. 4-pin ATX 12V Power Connector 13 Chipset: Intel® H55

2. SYS_FAN1 Header 14. SATA Connectors
3. PCI Express x16 Slot 15. SYS_FAN2 Header
4. PCI Express x4 Slot 16. 24-pin ATX Power Connector
5. PCI Slots 17. Floppy Connector
6. Front Audio Connector 18. IrDA Connector
7. S/PDIF Out Connector 19. TPM Connector
8. Speaker Connector 20. DDR3 DIMM Slots
9. Intel® ME Jumper 21. COM2 Connector
10. Front USB Connectors 22. CPU_FAN Header
11. Clear CMOS Jumper 23. LGA1156 CPU Socket
12. Front Panel Connector
Note : The above motherboard layout is for reference only, please refer to the physical
motherboard for detail.

1-3 Back Panel Connectors
PS/2 Port Serial Port LAN Port

Line Out
1
1 3 7
Line In
Rear Speaker
Subwoofer
Side Speaker
Microphone In
2 4 5 2 6 8
USB Ports DVI-I Port HDMI Port USB Ports Optical S/PDIF Audio Ports
Out Port
1. PS/2 Port
Use the PS/2 port to connect a PS/2 mouse or keyboard.
2. USB Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. Serial Port
This is output of RS232 COM1 port.
4. DVI-I Port
The DVI-I port supports DVI-I specification. Connect a monitor that supports VGA or DVI-D con-
nection to this port.
5. HDMI Port
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface
to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI
audio/video device to this port. The HDMI Technology can support a maximum resolution of
1920x1080p but the actual resolutions supported depend on the monitor being used.
6. Optical S/PDIF Out Port
This port provides digital audio out to an external audio system that supports digital optical
audio.
7. RJ-45 LAN Port
The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.
Left: Active Right: Link

LAN Type Active Link
Status Description Status Description
LED LED
Off No Link Off No Link
Off 10Mb/s Connection
1000M Green Data
Green 100Mb/s Connection
Blinking Activity
Orange 1000Mb/s Connection

8. Audio Ports
For the definition of each audio port, please refer to the table below :
4-channel
1
Port 2-channel 5.1-channel 7.1-channel

Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out

This chapter introduces the hardware installation process, including
the installation of the CPU, memory, power supply, slots, pin
headers and the mounting of jumpers. Caution should be exercised
during the installation of these modules. Please refer to the
motherboard layout prior to any installation and read the contents in
this chapter carefully.
This chapter includes the following information :

■ Install the CPU and CPU Cooler
■ Install the Memory
■ Install an Expansion Card
■ Install other Internal Connectors
■ Jumpers
Please visit the following website for more supporting information about your motherboard.
CPU Support List:
http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List:
http://www.foxconnsupport.com/complist.aspx
2-1 Install the CPU and CPU Cooler
IO
N
!
UT
CA
Read the following guidelines before you begin to install the CPU :
■ Make sure that the motherboard supports the CPU.
■ Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
2
■ Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or
you may locate the notches on both sides of the CPU and alignment keys on the CPU
socket.)
■ Apply an even and thin layer of thermal grease on the surface of the CPU.
■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
■ Set the CPU host frequency in accordance with the CPU specifications. It is not
recommended that the system bus frequency be set beyond hardware specifications
since it does not meet the standard requirements for the peripherals. If you wish to
set the frequency beyond the standard specifications, please do so according to your
hardware specifications including the CPU, graphics card, memory, hard drive, etc.
Hyper-Threading Technology System Requirements:

(Go to Intel's website for more information about the Hyper-Threading Technology)
■ An Intel® CPU that supports HT Technology
■ A chipset that supports HT Technology
■ An operating system that is optimized for HT Technology
■ A BIOS that supports HT Technology and has it enabled
Install the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.
LGA1156 CPU Socket
Alignment Key
Pin-1 corner of
the CPU Socket
LGA1156 CPU
Notch
Pin-1 triangle
marking of CPU

Follow the steps to install the CPU onto the CPU socket :
IO
N
!
UT
CA
Before installing the CPU, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the CPU.
2
1. Release the CPU socket lever. 2. Lift the metal cover on the CPU
socket.
3. Remove protective socket cover. 4. Check pin one marking (triangle)

with the pin one corner of the CPU
socket, align the CPU notches with
the socket alignment keys and gently
put the CPU onto the socket.
5. When CPU is properly seated,

replace the metal cover and push the
CPU socket lever back to its locked
position.

Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler on the motherboard.
2
1. Apply and spread an even thermal 2. Place the four bolts of the CPU
grease on the surface of CPU. cooler to the holes of the motherboard,
push them straight down from the top,
and the bolts will be fastened on the
motherboard. That's it.
3. Check the solder side of the 4. Attach the 4-wire CPU cooler
motherboard, the push pin should be connector to the CPU FAN header
fixed as depicted in the picture. on the motherboard .
Release bolts of CPU cooler from

3
2 motherboard :
1.Turning the push pin (bolt)
1 along with the direction of arrow
(counterclockwise).
2. Pull the push pin straight up.
3. Turning push pin clockwise to its
default position.
N
IO
!
UT
CA
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
10
10
2-2 Install the Memory
IO
N
!
UT
CA
Read the following guidelines before you begin to install the memory :
■ Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, brand, speed, and chips be used.
2
■ Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides two DDR3 memory sockets and supports Dual Channel Technology.
When memory is installed, the BIOS will automatically check the memory in your system.
Two DDR3 memory sockets are divided into two channels:

Channel 0 : DIMM1
Channel 1 : DIMM2
The combinations of DIMM modules are :
DIMM1 DIMM2
Single Channel DS/SS -
Single Channel - DS/SS
Dual Channel DS/SS DS/SS
(DS : Double Side, SS : Single Side, - : No Memory)
N
IO
!
UT
CA
It is recommended that memory of the same capacity, brand, speed, and chips be
used and please select dual channel first to achieve optimum performance.
11
11
Installing a Memory
IO
N
!
UT
CA
■ Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module. Be sure to
install DDR3 DIMMs on this motherboard.
2
144-Pin
Notch
96-Pin
If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated
by a notch in the middle, so it can only fit in one direction. Follow the steps below to correctly install
your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory socket.
Place the memory module onto the socket, then put
your fingers on top edge of the module, and push
it down firmly and seat it vertically into the memory
socket.
Step 2:
The clips at both ends of the socket will snap into place
when the memory module is securely inserted.
12
12
2-3 Install an Expansion Card
IO
N
!
UT
CA
■ Make sure the motherboard supports the expansion card. Carefully read the manual
that came with your expansion card.
■ Always turn off the computer and unplug the power cord from the power outlet before
2
installing an expansion card to prevent hardware damage.
PCI Express x16
PCI Express x4
PCI
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis
back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover.
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Installing and Removing a PCI Express x16 Graphics Card :
• Installing a Graphics Card:

Gently insert the graphics card into the PCI Express x16 slot.
Make sure the graphics card is locked by the latch at the end of
the PCI Express x16 slot.
• Removing the Card:

Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.
13
13
2-4 Install other Internal Connectors
Power Connectors
This motherboard uses an ATX power supply. In order not to damage any device, make sure all the
devices have been installed properly before applying the power supply.
24-pin ATX Power Connector : PWR1

2
PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the
connector and make sure it is secure.
Pin # Definition Pin # Definition
1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_ON(Soft On/Off)
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 Power Good 20 NC
9 +5V SB(Stand by +5V) 21 +5V
24 13 10 +12V 22 +5V
11 +12V 23 +5V
12 3.3V 24 GND
12 1
PWR1
Pin No. 24
N
IO
!
UT
CA
We recommend you using a 24-pin power supply.

If you are using a 20-pin power supply, you need
to align the ATX power connector according to
the picture.
20-Pin Power
4-pin ATX 12 V Power Connector : PWR2

Connect the 8-pin ATX 12V power supply to PWR2 and provides power to the CPU.
3 1
Pin # Definition
1 GND
+12V GND
2 GND
3 +12V
4 2
4 +12V
PWR2
14
14
Audio Connector : F_AUDIO 1 2
The audio connector supports HD Audio standard. It PORT1_L AUD_GND
PORT1_R PRESENCEJ
provides the Front Audio output choice. PORT2_R SENSE1_RETURN
SENSE_SEND EMPTY
PORT2_L SENSE2_RETURN
9 10
F_AUDIO
S/PDIF OUT Connector : SPDIF_OUT
2
The connector is used for S/PDIF output. +5V 1
EMPTY 2
SPDIF_OUT 3
GND 4
SPDIF_OUT
USB Connectors : F_USB1_B/2_B/4_B
In addition to the USB ports on the rear panel, this
product also provides 10-pin USB headers on its
motherboard. By connecting through USB cables
with them, user can quickly expand another USB
ports on the front panel.
1 2
VCC VCC
D- D-
D+ D+
GND GND
EMPTY NC
9 10
F_USB1_B/2_B/4_B
Serial ATA Connectors : SATA_1/2/3/4/5/6

1
The Serial ATA connector is used to connect with
GND
SATA Hard Disk or CD devices which support this TX+
TX-
feature. The current Serial ATA II interface allows up
GND
to 300MB/s data transfer rate. RX-
RX+
GND
SATA_1/2/3/4/5/6
Floppy Disk Drive Connectors : FLOPPY
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
1 +5V
IrDA Connector : IR 2 EMPTY
3 IRRX
This connector supports infrared wireless trans- 4 GND
mitting and receiving device. 5 IRTX
IR
15
15
Front Panel Connector : FP1
This motherboard includes one connector for connecting
1 2
the front panel switch and LED Indicators. + +
HDD-LED PWR-LED
- -
Hard Disk LED Connector (HDD-LED) RESET-SW PWR-SW
Connect to the chassis front panel IDE indicator LED. It NC EMPTY
indicates the active status of the hard disks. This 2-pin 9 10
2
connector is directional with +/- sign. FP1
Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the
switch is pressed.
Power LED Connector (PWR-LED)

Connect to the power LED indicator on the front panel
of the chassis. The Power LED indicates the system’s
status. When the system is in operation (S0 status),
the LED is on. When the system gets into sleep mode
(S1) , the LED is blinking; When the system is in S3/S4
sleep state or power off mode (S5), the LED is off. This
2-pin connector is directional with +/- sign.
Power Switch Connector (PWR-SW)

Connect to the power button on the front panel of the
chassis. Push this switch allows the system to be turned
on and off rather than using the power supply button. 1 2
LCLK GND
LFRAMEn EMPTY
LRESETn NC_3
LAD3 LAD2
TPM Connector : TPM
VDD LAD1
The TPM (Trusted Platform Module) provides the ability LAD0 GND
to the PC to run applications more secure and to make NC_1 NC_4
transactions and communication more trustworthy. To NC_2 SERIRQ
GND CLKRUNin
utilize this function, you should purchase additional device
LPCPDn NC_5
and install it. 19 20
TPM
COM Connector : COM2 1 2

This motherboard supports one serial RS232 COM port for RLSD SIN
legacy compatibility. User must purchase another RS232 SOUT DTR
GND DSR
cable with a 9-pin D-sub connector at one end to connect
RTS CTS
with the external RS232 device and another end with 10-
RI EMPTY
pin female connector to connect with COM1 connector in 9 10
the motherboard. COM2
16
16
Speaker Connector : SPEAKER
The speaker connector is used to connect speaker of SPKJ 1
EMPTY 2
the chassis.
NC 3
SPKJ 4
SPEAKER
2
Fan Connectors : CPU_FAN, SYS_FAN1/2
There are three main fan headers on this motherboard.
The fan speed can be controlled and monitored in “PC
Health Status” section of the BIOS Setup. These fans
can be automatically turned off after the system enters
3, S4 and S5 sleeping states.
1 GND
POWER
SENSE
CONTROL
CPU_FAN/SYS_FAN1/2
17
17
2-5 Jumpers
For some features needed, users can change the jumper settings on this motherboard to modify them.
This section explains how to use the various functions of this motherboard by changing the jumper
settings. Users should read the following content carefully prior to modifying any jumper setting.
Description of Jumpers
1. For any jumper on this motherboard, pin 1 can be identified by the bold silkscreen next to it.
2
However, in this manual, pin 1 is simply labeled as “1”.

2. The following table explains different types of the jumper settings. "Closed" means placing a jumper
cap on the two pins to temporarily short them. The shorting can also be done by touching two
pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent
hazardous ESD (Electrical Static Discharge) problem.
Jumper Diagram Definition Description

1 1-2 Set Pin 1 and Pin 2 closed
1
1 2-3 Set Pin 2 and Pin 3 closed
Clear CMOS Jumper: CLR_CMOS

The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password... etc.). Clear CMOS data is the fast way to go back to
factory default when the BIOS settings were mistakenly modified.
The steps to clear CMOS data are :

1. Turn off the computer, unplug the power cord from the power outlet.
2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS
data.
3. Return the setting to its original with pins 2-3 closed.
4. Plug in the power cord to your computer and turn it on.
5. Go to BIOS Setup to configure new system as described in next chapter.
1
Clear 2
3
Normal 1
2
(Default)
3
CLR_CMOS
NING
AR !
W
■ Disconnect the power cable before adjusting the jumper settings.

■ Do not clear the CMOS while the system is turned on.
18
18
Intel® ME Jumper: MFG
This motherboard uses MFG jumper to enable or disable Intel® Management Engine function.
Intel® Management Engine (ME) is an embedded microcontroller located in Intel chipset. It
provides latest IT management features such as Intel® AMT, that allows to improve management
of corporate assets.
Set the jumper to pins 1-2, you can enable the Intel® Management Engine function.
Set the jumper to pins 2-3, you can disable the Intel® Management Engine function.
2
1
Enable 2
(Default) 3
1
Disable 2
3
MFG
N
IO
!
UT
CA
Before flashing BIOS ROM, you need to set MFG jumper to pins 2-3 first.
19
19
This chapter tells how to change system settings through
the BIOS Setup menus. Detailed descriptions of the BIOS
parameters are also provided.
You have to run the Setup Program when the following cases
occur :
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :

■ Enter BIOS Setup
■ Main Menu
■ System Information
■ Advanced BIOS Features
■ Fox Central Control Unit
■ Advanced Chipset Features
■ Integrated Peripherals
■ Power Management Setup
■ PC Health Status
■ BIOS Security Features
■ Load Optimal Defaults
■ Save & Exit Setup
■ Exit Without Saving
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.
Enter BIOS Setup
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <DEL> to enter Setup, <ESC> to boot menu" appears at the bottom
of the screen, you can press <DEL> key to enter Setup.
N
IO
!
UT
CA
We do not suggest that you change the default values in the BIOS Setup, and we
shall not be responsible for any damage which resulted from the change you made.
3
Main Menu
The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the sub-menu.
Each item in the main menu is explained below:
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
► System Information
Information ► PC Health Status
► Advanced BIOS Features ► BIOS Security Features
► Fox Central Control Unit Load Optimal Defaults
► Advanced Chipset Features Save & Exit Setup

► Integrated Peripherals Exit Without Saving
► Power Management Setup
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults
Configure Time and Date. Display System Information...
v02.61 (c) Copyright 1985-2009, American Megatrends, Inc.
► System Information
It displays the basic system configuration, such as BIOS Version, memory size plus system
date, time and Floppy drive. They all can be viewed or set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu. There are boot up settings.
► Fox Central Control Unit
Some special proprietary features (such as overclocking) can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance
can be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O and other USB devices... etc.
21
► Power Management Setup
All the items related with Green function features can be set up through this menu.
► PC Health Status
This setup enables you to read/change Fan speeds, and displays temperatures and voltages
of your CPU/System.
► BIOS Security Features
The Supervisor/User password can be set up through this menu to prevent unauthorized use
of your computer. If you set a password, the system will ask you to key in correct password
before boot or access to Setup.
► Load Optimal Defaults
3
The optimal performance settings can be loaded through this menu. However, it may offer bet-
ter performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause
problem if you have more memory or I/O cards installed. It means, if your system loading is
heavy, set to optimal default may sometimes come out an unstable system. What you need
now is to adjust BIOS setting one by one, trial and error, to find out the best setting for your
current system.
► Save & Exit Setup
Save setting values to CMOS and exit.
► Exit Without Saving
Do not change anything and exit the setup.
22
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, memory and
so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change the
setting.
System Information
System Time [15

09 : 40 : 49] Help Item
System Date [Mon , 10/26/2009]
Use [Enter], [TAB]
► Primary IDE Master [Not Detected] or [SHIFT-TAB] to
► Primary IDE Slave [Not Detected] select a field.
► Secondary IDE Master [Not Detected]
► Secondary IDE Slave [Not Detected] Use [+] or [-] to
3
► Third IDE Master [Not Detected] change system date
► Fourth IDE Master [Not Detected]

Floppy A [1.44 MB 31/2]
Halt On [All Errors, But ...]
Keyboard [Enabled]
Mouse [Disabled]
Floppy [Disabled]
Model Name : H55MX-S
BIOS Version : 996F1D03
Memory : 1024MB
MAC Address : 00-01-6C-69-0B-DB

► System Time
This item allows you to configure the desired time. Use [ENTER], [TAB] or [SHIFT-TAB] to
select a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► System Date
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Primary / Secondary IDE Master / Slave, Third / Fourth IDE Master
While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [Disabled], [360KB, 51/4"], [1.2MB, 51/4"], [720KB, 31/2"], [1.44MB, 31/2"] and [2.88
MB, 31/2"].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
tion can be enabled/disabled in the next three settings.
► Keyboard
23
The system boot will not stop for a keyboard error if you enabled this item.
► Mouse
The system boot will not stop for a mouse error if you enabled this item.
► Floppy
The system boot will not stop for a floppy error if you enabled this item.
► Model Name
Model name of this product.
► BIOS Version
It displays the current BIOS version. User can check this information and discuss with the field
service people if a BIOS upgrade is needed.
► Memory
3
This item displays the current memory size. The size is depending on how many memory mod-
ules were installed in your system before powering on.
► MAC Address
This item shows the onboard LAN MAC address.
24
Advanced BIOS Features
Advanced BIOS Features
Quiet Boot [Enabled

[Enabled] Help Item
Bootup Num-Lock [On]
PCI Latency Timer [64] Disabled: Displays
Floppy Drive Seek [Disabled] normal POST messages.
► Intel VT-d Configuration [Press Enter] Enabled: Displays OEM
► Trusted Computing [Press Enter] Logo instead of POST
messages.
► Boot Device Priority [Press Enter]
► Hard Disk Drives [Press Enter]
► Removable Drives [Press Enter]
3

► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► PCI Latency Timer
This item is used to set the value in units of PCI clocks for PCI device latency timer register.
► Floppy Drive Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will ap-
pear an error message. Disabling this function, then POST will not detect the floppy.
► Intel VT-d Configuration/Trusted Computing
Press <Enter> to go to relative submenu.
► Boot Device Priority
This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.
► Hard Disk Drives
This option is used to specify the boot priority sequence from available hard disk drives.
► Removable Drives
This option is used to specify the boot priority sequence from available removable drives.
25
Intel VT-d Configuration
Intel VT-d Configuration
Help Item
Intel VT-d [Disabled]
Options

Disabled
Enabled

3

► Intel VT-d
Intel® Virtualization Technology for Directed I/O (VT-d) can improve performance of I/O de-
vices in virtualized environment. This item is used to enable/disable the VT-d feature.
Trusted Computing

Trusted Computing
Trusted Computing Help Item

TCG/TPM Support [No] Enable/Disable TPM
TCG (TPM 1.1/1.2)
support in BIOS

► TCG/TPM Support
Trusted Computing Group (TCG) members develop and promote open, vendor-neutral,
industry standard specifications for trusted computing building blocks and software interfaces
across multiple platforms
TPM (Trusted Platform Module) is a specification promoted by TCG. A Trusted Platform Mod-
ule offers facilities for secure generation of cryptographic keys.
The TPM Work Group is chartered to create the Trusted Platform Module (TPM) specification.
26
The definition of the TPM architecture comes from the TC and the TPM Work Group defines
the implementation of that architecture. Work group members should have a working knowl-
edge of security in relation to the design and usage of cryptographic modules. Members
should also have a working knowledge of cryptographic techniques including public-key cryp-
tography, cryptographic algorithms and protocols.
This item is used to enable/disable the function of TCG/TPM support.
27
Fox Central Control Unit
Fox Central Control Unit
► CPU Configuration [Press Enter] Help Item

Ratio Status: Unlocked (Min:09, Max:23)
Ratio Actual Value: 23 Configure CPU.
Ratio CMOS Setting [23]

Current DRAM Speed :1333MHz
DRAM Frequency [Auto]
Memory Timing by SPD [Auto]
Adjust DRAM Voltage [Disabled]
3


► CPU Configuration
► Ratio CMOS Setting
This item is used to set the ratio between CPU Core Clock and the FSB Frequency. You can
use [+] or [-] to adjust the value.
► DRAM Frequency
This item is used to adjust the memory speed. Select [Auto] for SPD enable mode. You can
select a value manually such as [800 MHz], [1067 MHz] and [1333MHz]..
► Memory Timing by SPD
This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a memory module. It
contains important information about the module's speed, size, addressing mode and various
other parameters, so that the motherboard memory controller (chipset) can better access the
memory device.
Select [Auto] for SPD enable mode.
Select [Manual] to set the parameters by yourself.
The following 10 settings are valid only when the Memory Timing by SPD is set to [Manual].
► DRAM tCL
The number of memory clocks it takes a DRAM to return data after the read CAS_L is assert-
ed depends on the memory clock frequency. The value that BIOS programs into the memory
controller is a function of the target clock frequency. The target clock frequency is determined
from the supported CAS latencies at given clock frequencies of each DIMM.
► DRAM tRAS (Active-to-Precharge Delay)
This item allows you to set the minimum RAS# active time (in clock cycles).
► DRAM tRP (Precharge Command Period)
This item allows you to select the row precharge time (in clock cycles).
► DRAM tRCD (RAS-to-CAS Delay)
This item allows you to select a delay time (in clock cycles) between the CAS# and RAS#
strobe signals.
28
► DRAM tWR (Write Recovery)
This item allows you to select the write recovery time (in clock cycles).
► DRAM tRFC(Auto-Refresh-to-Active/Auto-Refresh Command Period)
Refresh to Refresh or Refresh to Active command interval.
► DRAM tWTR (Internal Write to Read Command Delay)
This item allows you to select a delay time (in clock cycles) between sending the last data from
a write operation to the memory and issuing a read command.
► DRAM tRRD (Active-to-Active of a Different Bank)
This item allows you to select a delay time (in clock cycles) between the RAS# and RAS#
strobe signals.
► DRAM tRTP (Internal Read to Precharge Command Delay)
3
This item allows you to set the delay time (in clock cycles) between read command and pre-
charge command.
► DRAM tFAW(Four Active Window Delay)
Specifies the time window in which four activates are allowed the same rank.
► Adjust DRAM Voltage
This item is used to change the memory voltage.
CPU Configuration
CPU Configuration
CPU Configuration Help Item

Module Version : 01.07

Manufacturer : Intel
Genuine Intel(R) CPU 000 @3.07GHz
Frequency :3.06GHz
BCLK Speed :133MHz
Cache L1 : 256 KB
Cache L2 :1024 KB
Cache L3 :4096 KB
Intel PPM Configuration [Press Enter]
C1E Support [Enabled]
MPS and ACPI MADT ordering [Modern ordering]
Limit CPUID MaxVal [Disabled]
Virtualization Technology [Enabled]
Execute Disable Bit [Enabled]
Intel(R) HT Technology [Enabled]
Active Processor Cores [All]
A20M [Disabled]


► Intel PPM Configuration
► C1E Support (Appears only when CPU supports)
C1E represents Enhanced HALT State. It is a feature which CPU uses to reduce power
consumption when in halt state. C1E drops the CPU’s multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
► MPS and ACPI MADT ordering
[Modern ordering] : for Windows XP or later OSes.
[Legacy ordering] : for Windows 2000 or earlier OSes.
► Limit CPUID MaxVal
This item is used to enable or disable CPUID maximum value limit configuration. Set [Disa-
bled] for WinXP.
29
► Virtualization Technology
Virtualization (i.e. Intel® Vanderpool Technology) allows a platform to run multiple operating
systems and applications in independent partitions or “containers.” One physical compute
system can function as multiple “virtual” systems. Vanderpool Technology can help improve
future virtualization solutions. This item will be displayed only when the CPU is supporting this
feature and the setting is used to enable/disable it.
► Execute Disable Bit
This item is used to enable/disable the Execute Disable Bit feature.
Intel's Execute Disable Bit functionality can help prevent certain classes of malicious buffer
overflow attacks when combined with a supporting operating system.
3
Execute Disable Bit allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert code in the
buffer, the processor disables code execution, preventing damage and worm propagation.
Replacing older computers with Execute Disable Bit-enabled systems can halt worm attacks,
reducing the need for virus-related repairs. By combining Execute Disable Bit with anti-virus,
firewall, spyware removal, e-mail filtering software, and other network security measures, IT
managers can free IT resources for other initiatives.
► Intel(R) HT Technology
This item is used to enable/disable the Hyper Threading Technology feature.
► Active Processor Cores
This item is used to set the number of cores to enable in each processor package.
► A20M
Legacy OSes and APs may need A20M enabled.
Intel PPM Configuration

Intel PPM Configuration
Intel PPM Configuration Help Item

EIST Function [Enabled] Disabled
Intel(R) TurboMode tech [Enabled] Enabled
Factory default TDC limit value : 552
Factory default TDC limit value : 696
Intel(R) C-STATE Technology [Enabled]
CState Package Limit [Auto]
C3 State [ACPI C2]
C6 State [Enabled]
C1 Auto Demotion [Enabled]
C3 Auto Demotion [Enabled]



► EIST Function
You can select the EIST (Processor Power Management, PPM) through this item.
30
N
IO
!
UT
CA
Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust
processor voltage and core frequency, which can result in decreased average power
consumption and decreased average heat production. There are some system require-
ments must be met, including CPU, chipset, motherboard, BIOS and operation system.
Please refer to Intel Website for more information.
► Intel(R) TurboMode tech

Turbo mode allows processor cores to run faster than its marked frequency in specific condi-
3
tion.
► Intel(R) C-STATE Technology
This item is used to enable/disable C-State. C-State means CPU idle is set to C2/C3/C4.
► CState package limit setting
This item appears only when the Intel(R) C-STATE Technology is set to “Enabled”. It is used
to select the C-State mode, set to “Auto” can allow BIOS to detect the C-State mode that sup-
ported by your CPU.
► C3 State
This item is used to enable/disable C3 State.
► C6 State
This item is used to enable/disable C6 State.
► C1 Auto Demotion
When enabled, CPU will conditionally demote C3/C6/C7 requests to C1 based on uncore
auto-demote information.
► C3 Auto Demotion
When enabled, CPU will conditionally demote C6/C7 requests to C3 based on uncore auto-
demote information.
31
Advanced Chipset Features

Advanced Chipset Features
IMC Type : *Dale Family IMC Help Item

Management Engine Version : 6.0.0.1184
ENABLE: Allow
Memory Remap Feature [Enabled] remapping of
PCI MMIO Allocation: 4GB To 3328MB overlapped PCI memory
Initate Graphic Adapter [PEG/PCI] above the total
IGD Graphics Mode Select [Enabled, 32MB] physical memory.
IGD GTT Graphics memory size [No VT mode, 2MB]
DISABLE: Do not allow
NB PCIE Configuration remapping of memory.
PEG Port [Auto]
3
PEG Force GEN1 [Disabled]

SLP_S4# Min. Assertion Width [1 to 2 seconds]

► Memory Remap Feature

This item is used to enable/disable memory remapping around memory hole.
PCI doesn't actually care much which addresses are used, but by convention the PC platform
puts them at the top of the 32-bit address space. For many years it wasn't possible or practical to
put that much RAM into a PC. But now it is, so it's up to the memory controller and host bridge to
figure out what to do. Many systems cause that high RAM to simply be ignored, resulting in the
loss of effective RAM. More complex systems will take the RAM that would occupy that 3.5-4GB
address space and re-map it into the 4.0-4.5GB address space. The RAM doesn't care because
it's just an array of storage cells, it's up to the memory controller to associate addresses with
those storage cells. Of course, that only works if you're using a 64-bit (or 32bit physical address
extension (PAE) enabled) OS that can deal with physical addresses larger than 32 bits. Once
this option is enabled, BIOS will display the true size of memory installed.
► Initate Graphic Adapter
This item is used to select which graphics controller is used as the primary boot device.
► IGD Graphics Mode Select
This item is used to select the amount of system memory used by the Internal graphics device.
► PEG Port
This item is used to disable the PCI Express graphics port or let it be auto-detected.
► PEG Force GEN1
This item is used to force PCI Express graphics port to work at GEN1 speed.
► SLP_S4# Min. Assertion Width
SLP_S4# is a signal for power plane control. This signal shuts off power to all non-critical
systems when in the S4 (Suspend to Disk) or S5 (Soft Off) state.
This setting indicates the minimum assertion width of the SLP_S4# signal to ensure that the
DRAMs have been safely power-cycled. Setting values are: [4 to 5 seconds], [3 to 4 seconds],
[2 to 3 seconds], [1 to 2 seconds].
32
Integrated Peripherals
Integrated Peripherals
► IDE Configuration Enter]

[Press Enter] Help Item
► OnBoard Configuration [Press Enter]
► SuperIO Configuration [Press Enter] Configure the IDE
► USB Configuration [Press Enter] Device(s).

3
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration

IDE Configuration
IDE Configuration
Configure SATA as [IDE] Help Item

SATA#1 IDE Configuration [Enhanced]
SATA#2 IDE Configuration [Enhanced] Options
IDE Detect Time Out [35]
IDE
Disabled


► Configure SATA as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.
► SATA#1 IDE Configuration
SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the
mode of the SATA ports. Setting values are: [Compatible], [Enhanced].
► SATA#2 IDE Configuration
SATA#2 are the SATA ports 5,6 of the motherboard. This item allows you select the mode of
the SATA ports. Setting values are: [Disabled], [Enhanced].
33
► IDE Detect Time Out
This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.
OnBoard Configuration
OnBoard Configuration
[Enabled]
OnBoard Audio Controller Help Item
OnBoard LAN Controller [Enabled]
OnBoard LAN Boot ROM [Disabled] Options

Enabled
Disabled
3

► OnBoard Audio Controller

This item is used to enable or disable the HD Audio controller.
► OnBoard LAN Controller
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
SuperIO Configuration
SuperIO Configuration
SuperIO Configuration Help Item

[Enabled]
OnBoard Floppy Controller [Enabled] Allows BIOS to Enable
Serial Port1 Address [3F8/IRQ4] or Disable Floppy
Serial Port1 Mode [Normal] Controller.
Serial Port2 Address [2F8/IRQ3]
Serial Port2 Mode [Normal]


34
► OnBoard Floppy Controller
This item is used to enable/disable Floppy Controller.
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial
port1.
► Serial Port1 Mode
This item is used to set the mode for the onboard serial port1. The available settings are:
[Normal]: RS232 Mode.
[IrDA]: An IrDA device for maximum 115200bit/s.
[ASK IR]: A faster IrDA for 1152000bit/s.
► Serial Port2 Address
3
This item is used to assign the I/O address and interrupt request(IRQ) for the onboard serial
port2.
► Serial Port2 Mode
This item is used to set the mode for the onboard serial port2. The available settings are:
[Normal]: RS232 Mode.
[IrDA]: An IrDA device for maximum 115200bit/s.
[ASK IR]: A faster IrDA for 1152000bit/s.
USB Configuration
USB Configuration
USB Configuration Help Item

Module Version - 2.24.5-13.4 Enables support for
legacy USB. AUTO
USB Devices Enabled : option disables
2 Hubs legacy support if
no USB devices are
Legacy USB Support [Enabled] connected.
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]

► USB Storage Configuration [Press Enter]


► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[HiSpeed] in 480Mbps; [Full Speed] in 12Mbps.
► BIOS EHCI Hand-Off
Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI)
specification, but there are a few features that are not implemented. Microsoft said preliminary
support for EHCI BIOS handoff will be available in Windows XP SP2.
35
This item allows you to enable support for OS without EHCI hand-off feature.
This is a workaround for OS without EHCI hand-Off support .
The EHCI ownership change should claim by EHCI driver.
If USB mass devices are connected to the computer, the following item will appear:
► USB Storage Configuration
After pressing <Enter>, you can set the reset delay for the USB mass storage device. There
are many different emulation types of this USB device, such as [Auto], [Floppy], [Forced FDD],
[Hard Disk] and [CDROM] can be selected. Select [Auto], USB devices less than 530MB will
be emulated as Floppy and remaining as hard drive. [Forced FDD] option can be used to force
3
a HDD formatted drive to boot as FDD(Ex. ZIP drive).
36
Power Management Setup
Power Management Setup
HPET [Enabled] Help Item

ACPI Suspend Type [S3 (STR)]
USB Device Wakeup From S3 [Enabled] Enable / Disable
Power On after Power Fail [Power Off]
Resume by PCIE PME [Enabled]
Resume by PCI Card [Enabled]
Resume by PS2 Keyboard [Enabled]
Resume by PS2 Mouse [Enabled]
Resume by RTC [Disabled]
3
ACPI (Advanced Configuration and Power Interface) is an open industry standard interfaces
enabling OS-directed configuration, power management, and thermal management of mobile,
desktop, and server platforms. It defines five sleeping states, they are :
S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system
context is lost (CPU or chip set) and hardware maintains all system context. (also called
Power On Suspend)
S2 - The S2 sleeping state is a low wake latency sleeping state. This state is similar to the S1
sleeping state except that the CPU and system cache context is lost (the OS is respon-
sible for maintaining the caches and CPU context). Control starts from the processor’s
reset vector after the wake event.
S3 - The S3 sleeping state is a low wake latency sleeping state where all system context is lost
except system memory. CPU, cache, and chip set context are lost in this state. Hardware
maintains memory context and restores some CPU and L2 configuration context. Control
starts from the processor’s reset vector after the wake event. (also called Suspend to
RAM)
S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported
by ACPI. In order to reduce power to a minimum, it is assumed that the hardware platform
has powered off all devices. Platform context is maintained. (also called Suspend to
Disk)
S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The
system is in the “soft” off state and requires a complete boot when it wakes. Software
uses a different state value to distinguish between the S5 state and the S4 state to allow
for initial boot operations within the BIOS to distinguish whether or not the boot is going to
wake from a saved memory image.
37
► HPET
HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows
does not have access to it and therefore falls back to less accurate timing methods. This item
is used to enable or disable the HPET Support.
► ACPI Suspend Type
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
3
When you select “Auto”, it means OS will automatically take care and assign which mode is
the most suitable now.
► USB Device Wakeup From S3
This item is used to wake up the system by a USB device when it is staying at S3 state.
► Power On after Power Fail
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
► Resume by PCIE PME
This item is used to enable/disable the PCI Express device to generate a wake up.
► Resume by PCI Card
This item is used to enable/disable the PCI card to generate a wake up.
► Resume by PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume by PS2 Mouse
This item is used to enable/disable the PS2 mouse to generate a wake up.
► Resume by RTC
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
► RTC Alarm Date(Days)
When Resume by RTC is enabled, select a specific date to generate a wake up.
► RTC Alarm Time(HH:MM:SS)
When Resume by RTC is enabled, select a specific time to generate a wake up.
38
PC Health Status
PC Health Status
Warning Temperature [Disabled]

[Disabled] Help Item
Shutdown Temperature [Disabled]
CPU Temperature :24 C/75 F
o o Options
System Temperature :22 oC/71 oF
Disabled
CPU Fan Speed :3199 RPM 50 oC/122 oF
System Fan1 Speed :N/A 55 oC/131 oF
System Fan2 Speed :N/A 60 oC/140 oF
65 oC/149 oF
CPU Core :1.216 V 70 oC/158 oF
DRAM Voltage :1.584 V 75 oC/167 oF
+3.30V :3.392 V 80 oC/176 oF
+5.00V :4.972 V
3
85 oC/185 oF
+12.0V :11.840V
CPU Smart Fan Control [Disabled]
System Smart Fan1 Control [Disabled]
System Smart Fan2 Control [Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit

F1:General Help F9:Optimized Defaults

► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU/System Fan1 Speed/System Fan2 Speed
The CPU/System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/+3.30V/+5.00V/+12.0V
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan/System Smart Fan1/ System Smart Fan2 Control
This option is used to enable or disable smart fan function.
The following 4 settings are valid only when Smart Fan Control is set to [Enabled].
► Fan OFF Temperature
It allows you set a temperature value from which smart fan stops its operation.
► PWM Start Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► Slope PWM Value
The slope controls the PWM value being stepped up or down versus temperature changes.
39
BIOS Security Features
BIOS Security Features
Security Settings Help Item

Supervisor Password : Installed Install or change the
User Password : Installed password.

Enter]
Change Supervisor Password [Press Enter]
User Access Level [Full Access]
Change User Password [Press Enter]
Clear User Password [Press Enter]
Password Check [Setup]


► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input Enter New Password :
user password optionally.
► User Access Level
This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the supervisor password.
► Change User Password
This item is used to install or change user password.
► Clear User Password
This item will be displayed only when a User Password was set before. It is used to clear the
user password.
► Password Check
When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.
40
Load Optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
the Optimal defaults after updating the BIOS or after clearing the CMOS Load Optimal Defaults?
values.
Select this option and press Enter, it will pop out a dialogue box to let you [OK] [Cancel]
load the defaults. Select <OK> and then press <Enter> to load the defaults.
Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.
3
Save & Exit Setup
When you select this option and press <Enter>, a message
Save configuration changes and exit setup?
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the pro-
[OK] [Cancel]
gram, select [Cancel] or <ESC> to return to the main menu.
Exit Without Saving

If you select this option and press <Enter>, the following message
will be displayed in the center of the screen: Discard changes and exit setup?
Select [OK] to exit CMOS without saving your modifications,

select [Cancel] or <ESC> to return to the main menu. [OK] [Cancel]
41
The utility CD that came with the motherboard contains useful
software and several utility drivers that enhance the motherboard
features.
This chapter includes the following information:

■ Utility CD content
■ Install driver and utility
■ FOX ONE
■ FOX LiveUpdate
■ FOX LOGO
■ FOX DMI
Note : Because each module is independent, so the section number

will be reorganized and unique to each module, please understand.
Utility CD content
This motherboard comes with one Utility CD. You can simply put it into your CD/DVD-ROM drive,
and the main menu will be displayed on your PC screen to guide you how to install.
1. Install Driver
Use these options to install all the drivers for your system. You should install the drivers in order,
and you need to restart your computer after all the drivers have been installed.
A. Intel Chipset Driver

B. Realtek HDA Audio Driver
C. Realtek 811X LAN Driver
D. Intel VGA Driver
E. Intel Management Engine Interface Driver
4
2. Software Utilities
Use these options to install additional software programs. FOX ONE is a very powerful user inter-
face program which allows you to change your system setting without going to BIOS. Some auto
features help user to improve (or overclock) your system without being a computer literate.
A. FOX ONE
B. FOX LiveUpdate
C. FOX LOGO
D. FOX DMI
E. Microsoft DirectX 9.0*1
F. Adobe Acrobat Reader
G. Norton Internet Security
*1 : This item will appear in Windows XP operation system, but will not be shown in Windows Vista
operation system.
43
43
Install driver and utility
1. Install Driver
You must click "Intel Chipset Driver" to install it first. After that, you can click "One Click Setup" to
install all the other drivers left, or you can click on each individual driver to install it manually.
Manual Instal-
lation Step by
Step
Automatic
4
Installation by
One Click.
Exit the
program
Click to visit Select Select Browse CD Drop to

Foxconn's to Install to Install System Tray
website Utilities Drivers
2. Install Utility
You can select the specific utility to install.
44
44
FOX ONE
FOX ONE is a powerful utility for easily modifying system settings. It also allows users
to monitor various temperature values, voltage values, frequencies and fan speeds at
any time.
With FOX ONE, you can :

■ Modify system performance settings, such as the CPU and memory bus speeds,
CPU voltages, fan speeds, and other system performance options.
■ Monitor hardware temperatures, voltages, frequencies and fan speeds.
N
IO
!
UT
CA
Depending on hardware support, voltage monitoring and Fox Intelligent Stepping
4
features are optional and only supported in some models. If the option is selectable,
it also means the feature is supported.
■ Voltage Monitoring is supported only in FOX ONE Premium & Deluxe products.
■ Fox Intelligent Stepping is supported only in FOX ONE Deluxe products.
Supporting Operating Systems :

■ Windows 2000 ■ Windows XP (32-bit and 64-bit)
■ Windows 2003 (32-bit and 64-bit) ■ Windows Vista (32-bit and 64-bit)
Using FOX ONE :

The very first time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent
Stepping) will require you to calibrate the CPU’s loading. Click “OK” to proceed
and start the Utility. F.I.S. is a feature of FOX ONE, which can automatically adjust your
CPU clock based on your current system loading.
N
IO
!
UT
CA
Before you running the FOX ONE program, the system parameters (such as CPU
clock, voltage...etc.) are controlled by BIOS settings. After you run FOX ONE, it will
take over, and the controlling right will be transferred to FOX ONE. Later, if you exit
FOX ONE, then BIOS control will be back again.
45
45
1. Main Page
Show CPU
Information Toolbar Alert Lamp
Switch Button
Skin Button
4
Exit
Minimum
Configuration
Homepage
Monitor Frequency/Voltage/Fan
speed/Temperature value
Toolbar
Use the toolbar to navigate to other pages.
Alert Lamp
When the system is in healthy state, the color of alert lamp is green. When the system
is in abnormal state, the alert lamp color is red.
Switch Button
Click this button, it will simplify the whole FOX ONE control panel to a smaller
information bar (i.e. Simple Mode) as depicted below, you can drag this bar to any
place on your screen to help you monitoring system status.
Exit FOX ONE

Click here to go back to
FOX ONE full screen
Click here will drop the FOX ONE to Windows system tray
46
46
Skin Button
There are more choices of FOX ONE screen panels. Click this button, you can select
your favorite skin (FOX ONE Panel).
Click the new skin
4
picture to select
the new skin
Apply the changes Cancel the changes
Exit
Click this button to exit the program.
Minimum
Click this button to drop the FOX ONE to Windows system tray located at the lower
right corner of your screen.
Homepage
Click this button to visit Foxconn motherboard website :
http://www.foxconnchannel.com
47
47
Configuration
This menu allows you to configure :
1). Monitor interval (ms) :
This is to define the interval of different messages of system settings which are to
be displayed on Simple Mode screen. Minimum value is 1 second.
4
2). Simple Mode :

To select which message of system settings are to be displayed in the Simple
Mode. Messages such as CPU frequency, voltage...etc., they can be displayed one
by one in Simple Mode.
3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)

This function will re-calibrate the CPU's loading, and it may take several minutes
to proceed. The FOX ONE calibration process will apply different loadings to
your CPU, record PWM IC voltage together with the CPU clock running at these
loadings, so it can define and estimate within a particular range of system loading,
what the CPU clock should be.
48
48
Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.
4
Step 2 : After data is collected, it will ask you to restart your computer now.
Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU
Page) is also enabled, FOX ONE will automatically adjust your CPU clock
according to your system loadings. (Loadings are like Power Gaming, Data
Mining...etc.)
49
49
2. CPU Page - CPU Control
This page lets you select (or overclock) CPU clock to meet the current performance
level of the system. The fastest and suitable CPU clock running for current system can
be calculated by FOX ONE automatically or manually input by yourselves.
Manual :
You can press the up/down button to adjust your CPU clock.
Auto :
Click this button to let FOX ONE check the highest CPU clock you can use. System
will raise the CPU clock step by step until it hangs, you can then push the RESET
button on your PC panel to restart the system. When system restarts, run FOX ONE
again, it will display a recommended highest CPU clock for you, click <Yes> to apply it.
4
Go to CPU page Adjust by manual
Press Auto button to let FOX

ONE check the highest CPU
clock you can use.
Reset the FIS Features : Apply the

changes Select the different changes
benchmarks
A message informs you to

push RESET button later if
the system hangs finally.
Click Yes to continue.
50
50
You can see the system is
raising CPU clock until the
system hangs.
Push RESET button on the
front panel of your system to
restart the computer.
4
Run FOX ONE program
again, it will inform you
the previous test found
that 255MHz is the
recommended CPU clock for
your system.
Click Yes to apply it to your
system.
Now, your system is running

at a CPU clock of 255MHz.
51
51
FOX Intelligent Stepping (F.I.S., Optional)
Select FOX Intelligent Stepping will allow your system to automatically adjust your
CPU clock rate based on different system loadings. For example, if you select Power
Gaming, CPU clock will be driven to run at its maximum speed. While in Energy
Saving, CPU will lower down its speed to a minimum. The four benchmarks - Power
Gaming, Data Mining, Office and Energy Saving, the references of their system
loading were calculated and defined in the FIS Calibration option of Configuration
menu. Select Auto, CPU will automatically adjust its clock according to current system
loading.
4
3. Frequency Page - Frequency Control

This page lets you set memory and PCI Express frequencies by manual.
Go to Freq. page
Close this page
Select the option

you want to set
Adjust by manual
Reset the changes Apply the changes
52
52
4. Limit Setting
4.1 Limit Setting - CPU Temperature

This page lets you to set CPU high limit temperature and enable the alert function.
Go to Limit Show current CPU
Setting page temperature value
Enable alert function

when the CPU
temperature is higher
than high limit value
4
Show current high
limit value of the CPU
temperature
Set high limit by

dragging the lever
4.2 Limit Setting - System Temperature

This page lets you to set system high limit temperature and enable the alert function.
Show current system

temperature value

when the system
temperature is higher
than high limit value
Show current high

limit value of system
temperature
Set high limit by

dragging the lever
53
53
4.3 Limit Setting - CPU Fan
This page lets you to set CPU fan low limit rpm and enable the alert function.
Show current CPU

fan rpm value

when the CPU fan runs
slower than the low
limit rpm value
4
Show current low limit

rpm value of CPU fan
Set low limit rpm by

dragging the lever
4.4 Limit Setting - System Fan

This page lets you to set system fan low limit rpm and enable the alert function.
Show current system

fan rpm value

when the system fan
runs slower than low
limit rpm value

rpm value of system
fan

dragging the lever
54
54
4.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and enable the alert function.
Show current FAN1

fan rpm value

when the FAN1 fan
runs slower than low
limit rpm value

rpm value of FAN1 fan
4
dragging the lever
5. Voltage Page - Voltage Control (Optional)

This page lets you set CPU voltage, memory voltage and North Bridge voltage
manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is
0.05V/step, and North Bridge is 0.04V/step.
Go to Voltage page
Select the option

you want to set
Adjust by manual
Reset the changes Apply the changes
55
55
6. Fan Page - Fan Control
This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
Go to Fan page
Enable or disable
smart fan function
Set fan speed by
4
dragging the lever
Apply the changes
56
56
FOX LiveUpdate
FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by
local or online.

■ Windows 2000
■ Windows XP (32-bit and 64-bit)
■ Windows 2003 (32-bit and 64-bit)
■ Windows Vista (32-bit and 64-bit)
N
IO
!
UT
CA
4
Please set the BIOS setting “BIOS Write Protect” or “Super BIOS Protect” to [Disabled]
when running this application.
Using FOX LiveUpdate :
1. Local Update
1-1 Local Update - BIOS Information
This page lets you know your system BIOS information.
Link to website Minimum
Exit
Toolbar Show current

BIOS information
*** : please refer to the physical motherboard for detail.
57
57
1-2 Local Update - Backup
This page can backup your system BIOS. You can click “Backup”, and key in a file name, then
click “Save” to finish the backup operation. The extension of this backup file is ".BIN" for Award
BIOS and ".ROM" for AMI BIOS. Default directory is "C:\Desktop\My Documents" in Windows XP
and "Documents" in Vista. Make sure you can remember the file name together with the directory
which it is stored, prevented that you may need them to recover your BIOS later.
Key in a BIOS name

4
Click here
1-3 Local Update - Update

This page helps you to update your BIOS from a local file. After click “Update”, An alert message
will be displayed to ensure if you really want to continue, click “Yes” to confirm. A setup wizard
will guide you to load a local BIOS file to finish the operation. You must remember from which
directory to load your new BIOS file (with an extension of ".BIN" for Award BIOS, ".ROM" for AMI
BIOS) before the setup wizard starts.
N
IO
!
UT
CA
FOX LiveUpdate can automatically backup old BIOS before update. This feature can be
enabled in the "Configure-System" setup. Please refer to "Configure-System" section
for more detail. The default backup directory is C:\LiveUpdate_Temp, but the backup
file name will be automatically generated. It is hard to find it out from a backup directory,
and we recommend you using Explorer to check date/time message of this backup file
to find it out and write its name down to remember it.
58
58
2. Online Update
2-1 Online Update - Update BIOS
This page lets you update your system BIOS from Internet. Click “start”, it will search the new
BIOS from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
4
Search new BIOS
from Internet
Select BIOS to update
Browse detailed
information
Update BIOS
Close the window
2-2 Online Update - Update Driver

This page lets you update your system drivers from Internet. Click “start”, it will search the new
drivers from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new drivers

from Internet
59
59
Select the driver to update
Browse detailed
information
Install the selected
driver
Close the window

4
2-3 Online Update - Update Utility

This page lets you update utilities from Internet. Click “start”, it will search the new utilities from
Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new utilities

from Internet
Select the utility to update
Browse detailed
information
Install the selected
utility
Close the window
60
60
2-4 Online Update - Update All
This page lets you update your system drivers from Internet. Click “start”, it will search all new
BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
4
Search all new BIOS/
drivers/utilities from
Internet
Browse detailed
BIOS information
Browse detailed
driver information
Browse detailed
utility information
Close the window
61
61
3. Configure
3-1 Configure - option
This page lets you set auto search options. After you enable the auto search function, FOX
LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a
message on the task bar to inform you to do the next step.
Click here
Set auto
search options
4
Set auto search

the latest
FOX LiveUpdate
Select search
which kind of
versions
Apply the changes Reset to default value
Double click on the icon as show below, you can see the detailed information.
Double click here
62
62
When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will
auto search from internet and prompt you to install the new version.
Prompt you to
install the new
FOX LiveUpdate
4
3-2 Configure - System
This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate
utility.
Click here
Set the location of

download files or
auto backup BIOS
Select different skin

of the software
Reset to default value
Determine if the FOX LiveUpdate can Apply the changes

auto run when the system starts up
63
63
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
and without any interruption.
Click here
Select which BIOS ROM

to flash(Only available to
motherboard with backup
BIOS ROM )
Select to flash Boot Block

Select to clear CMOS
4
Apply the changes Reset to default value

N
IO
!
UT
CA
We recommend that you had better keep the default setting unchanged to avoid any
damage.
4. About & Help

This page shows some information about FOX LiveUpdate.
Click here
Show information about

FOX LiveUpdate
64
64
FOX LOGO
FOX LOGO is a simple and useful utility to backup, change and delete the boot time
Logo. The boot Logo is the image that appears on screen during POST (Power-On
Self-Test).
You can prepare a JPG image (1024x768) file, then use FOX LOGO to open it and
change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS
"Quiet Boot" setting in "Advanced BIOS Features" menu.

■ Windows 2000
4
Using FOX LOGO:
Main Page
Main screen
Exit
Backup
Minimize
Change Website
About
Delete
NING
AR !
W
When you change Logo or delete current Logo, the system will flash BIOS file auto-
matically. During this time, please DO NOT shut down the application and the system,
or the motherboard will be damaged seriously.
65
65
FOX DMI
FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data
formats : Report, Data Fields and Memory Dump.
With DMI information, system maker can easily analyze and troubleshoot your mother-
board if there is any problem occurred.

■ Windows 2000
4
Using FOX DMI:
Please operate this utility as the comments shows.
Click here to select Click here to select

the type you want the DMI Data format
to view. you need
66
66

H55MX S - Series Manual

Uploaded by

Copyright:

Available Formats

H55MX S - Series Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

H55MX S - Series Manual

Uploaded by

Copyright:

Available Formats

H55MX-S Series Motherboard

better, and tells you how to avoid problems.

© All rights reserved.

HON HAI PRECISION INDUSTRY COMPANY LTD

declares that the product

■ EN 55022: 1998/A2: 2003 Limits and methods of measurements of radio

Signature : Place / Date : TAIPEI/2009

Printed Name : James Liang

Trade Name: FOXCONN

Equipment Classification: FCC Class B Subassembly

Signature : Date : 2009

■ Electrostatic discharge (ESD) is the sudden and momentary electric current

Please carefully read the following procedures to install your computer :

Chapter 1 Product Introduction

Worldwide online contact Support :

CPU Support List :

Memory, VGA Compatibility List :

With advanced overclocking capability and a range of connectivity

This chapter includes the following information:

CPU Support LGA 1156 socket Intel® CPU:

Intel® CoreTM i7, CoreTM i5 and CoreTM i3 processors

1. 4-pin ATX 12V Power Connector 13 Chipset: Intel® H55

PS/2 Port Serial Port LAN Port

Left: Active Right: Link

Port 2-channel 5.1-channel 7.1-channel

This chapter includes the following information :

Hyper-Threading Technology System Requirements:

Install the CPU

LGA1156 CPU Socket

3. Remove protective socket cover. 4. Check pin one marking (triangle)

5. When CPU is properly seated,

Release bolts of CPU cooler from

Dual Channel Memory Configuration

Two DDR3 memory sockets are divided into two channels:

The combinations of DIMM modules are :

PCI Express x16

Installing and Removing a PCI Express x16 Graphics Card :

• Installing a Graphics Card:

• Removing the Card:

24-pin ATX Power Connector : PWR1

4 +5V 16 PS_ON(Soft On/Off)

9 +5V SB(Stand by +5V) 21 +5V

We recommend you using a 24-pin power supply.

4-pin ATX 12 V Power Connector : PWR2

Serial ATA Connectors : SATA_1/2/3/4/5/6

connector is directional with +/- sign. FP1

Reset Switch (RESET-SW)

Power LED Connector (PWR-LED)

Power Switch Connector (PWR-SW)

COM Connector : COM2 1 2

However, in this manual, pin 1 is simply labeled as “1”.

Jumper Diagram Definition Description

Clear CMOS Jumper: CLR_CMOS

The steps to clear CMOS data are :

■ Disconnect the power cable before adjusting the jumper settings.

This chapter includes the following information :

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.

► Advanced BIOS Features ► BIOS Security Features

► Fox Central Control Unit Load Optimal Defaults