Eevee Evolution Zipper Pouch Sewing Pattern
Eevee Evolution Zipper Pouch Sewing Pattern
Eevee Evolution Zipper Pouch Sewing Pattern
zipper pouch
a sewing pattern by
eevee zipper pouch
2 sewing tutorial
Print the pages needed for the file. You might have
one or more. Either way, be sure you have the
full collection by noting the page numbers in the
corner.
3
sew desu ne?
| www.cholyknight.com |
// ©2017 Choly Knight // Items made using this pattern may be sold. Credit to “Choly Knight” or “Sew Desu Ne?” is appreciated.
You may not reproduce, share, freely distribute, or sell this pattern as your own in digital or printed form.
eevee zipper pouch
5 sewing tutorial
suggested fabrics:
Body: Fleece, minky, felt, or terry
cloth
Thick, plush fabrics like these give
the pouch some body. The resulting
pouch will feel less flimsy and more
like a floppy stuffed animal. The
minky fleece stretchy fabric options, like fleece and
minky, will sew more easily if you
fuse a bit of lightweight interfacing
to them. But it’s not absolutely
necessary.
Lining: Quilting cotton
Something thin and easy to sew is
best for the inside of the pouch. This
will make attaching it to a zipper
much less of a headache. Plus, you
can find something in a cute print to
match your outer pouch fabric.
felt cotton
1 2 3 4
Place pattern on the fabric, Pin the pattern in place, use Using the paper as a For all fur fabrics, shake the
and make sure the stretch pattern weights, or trace the template, cut out the fabric. excess fuzz away.
line matches the stretch outline of the pattern with a Cut the required amount
of the fabric. The nap line washable marker. according to the pattern.
should go in the direction of
the fur.
cutting layout:
¼ yd.; 9” long
¼ yd.; 9” long
A A B B B
A A A A
NAP
NAP
NAP
B B B C B C B B B B B
16” wide 16” wide 16” wide
navy
aqua fabric
6”
D3
D5
D3
D3
A green teal
¼ yd.
D1
¼ yd.
E1 B F
6”
A A
D5
E2 E2
6”
A A
NAP
NAP
14” E1 F
cream E2 E2 B B B
E1 E1 6”
6”
6”
D4
D2 D2
6”
aqua
A 16” wide
D4
D2 D2 16” wide
6” 9”
G1 purple cream
¼ yd.
H1
6”
¼ yd.
A A G1
G2 G2
A A I2 I2 I2
6”
A
5”
H1 H1 I3
NAP
NAP
G2 G2 A
NAP
G1
G3 G3 G3 G3
G1
H1 I1 I2
I3
H2 H2 H2 H2 I4
6” 7” 10”
16” wide 16” wide 15” wide
J
A A symbols from the pattern. Or wait until the applicable step before
transferring.
• Note that the seam allowance used is ¼” throughout the project.
15” wide • Look out for the icon that corresponds to the character you’re
making. This will tell you whether that step applies to you.
hold applique
trace onto while pulling
paper side paper away
applique layout:
• 2 Basic eyes (black) • 2 Basic eyes (brown) • 2 Basic eyes (dark teal)
• 2 Eye shines (white) • 2 Inner ears (brown) • 2 Inner ears (dark teal)
• 1 Nose (black) • 2 Eye shines (white) • 2 Eye shines (white)
• 1 Nose (brown) • 1 Nose (dark teal)
• 1 Leafeon sprout (green)
4
applique 2
straight stitch;
whipstitch 3
great for felt 1
line up notches
trace onto
paper side fuse onto two sylveon version
opposing ears
line up
line up notches double
notches
leave
open for
leave turning
open for
turning
D2
bring together
single notches
trim excess
seam allowance
at corner
for:
• Grab your Espeon ear pieces (H1). Take one of the lavender and one of the purple pieces and align
them with right sides facing and raw edges matching up.
• Sew the long curved edges of the ear, leaving the shorter curved edge free for turning right side out.
• Clip the excess seam allowance at the corner to reduce bulk when the ear is turned.
turn right
side out
baste fold
in place
fold with
purple sides
12. baste the espeon ear together
basting:
for: A form of temporary
sewing meant to hold pieces
in place. A long stitch length is
• Turn the ear right side out and define the corner with a chopstick or similar often used for this reason. The
turning tool. finished result is not meant
to be seen and sometimes
• Refer to the paper pattern to find the fold line for the ear. Fold the ear along is even removed later
this line with the purple fabrics facing each other. (depending on your
project).
• Baste the ear along the open edge to hold the fold in place.
inner ear
facing
down
match up
double notches
leave open
for turning
trim excess seam
15 . attach the top fin allowance
for:
center fin
• Just like with the side fins back in step 10, sew the fin along the along top
pointed edge, leaving the short curved edge free for turning right
side out as shown in the photo.
• Trim the excess seam allowance at the corners and curves to
reduce bulk once the fin is turned.
• Turn the fin right side out and define the corners with a chopstick
or similar turning tool.
• Align the open end of the fin centered along the top of the front
piece. Baste it in place just like you did with the side fins.
for:
• Grab your Jolteon fur pieces (C) and align them with right sides facing and raw edges matching up.
• Sew them together along the pointed edge, leaving the curved edge free for turning right side out
Trim the excess seam allowance at the outer corners to reduce bulk and the inner corners to increase
flexibility. Turn the fur right side out and define the corners with a chopstick or similar turning tool.
• Align the open end of the fur centered along the top of the front piece. Baste it in place just like you did
with the ears.
align
below ears
for:
• Grab your Espeon fur tuft pieces (H2). Take two and align them with right sides facing and raw edges
matching up.
• Sew them together along the curved and pointed edge, leaving the short straight edge free for turning
right side out Trim the excess seam allowance at the outer corners to reduce bulk and the inner
corners to increase flexibility. Turn the fur right side out and define the corners with a chopstick or
similar turning tool. Repeat with the other fur pieces for two completed fur tufts total.
• Align the open end of the fur just below where you placed the ears (the smaller point pointing toward
the bottom). Baste them in place just like you did with the ears.
press flat
baste tab
place in place
fold so folded tab at
raw edges center top
meet
bend zipper so it
fits around top baste zipper
in place
stitch zipper
ends 9” apart
trim excess
zipper
layer lining
over zipper sew lining
to zipper
turn right
21. sew the lining side out
flip lining up
outer fabric
turn lining
side out
sew outer
fabrics together
23. sew the front to the back
for: all versions y-seams:
A set of 3 or more
• Flip the pouch so the lining is facing out as shown. seams with endings that
all converge on one point.
• Flip the lining fabric out of the way so just the outer fabrics are visible. Particularly common with
fabric pieces that aren’t
• Sew the outer fabrics together by starting where the zipper seam stopped. Push square, or shapes
the zipper teeth out of the way when you do this (if you can manage it), but go that aren’t flat.
slowly and carefully nonetheless. Sew across the bottom area to the other side
to meet the other end of the zipper.
→→ The process here is much like a y-seam, so the basic idea applies.
bring lining
fabrics together leave opening tuck in seam
for turning allowances
23 . sew the lining pieces
for: all versions
• Flip the lining pieces over so they’re now facing each other as
shown.
• Stitch the lining the same way as the outer fabric, starting where
the zipper seam stopped. However, leave a 2-3” opening for
turning near the center for turning the pouch.
• Turn the pouch right side out through the opening.
stitch close
• Tuck under the seam allowances in the opening and press them to fold
flat. Stitch across the folds to close up the lining.
cut through
blank layer
only
sew around
perimeter
2 1
4
3 seam allowance
(folded inside)
turn right
side out
NAP
t
en
UMBREON
em
¼” seam allowance
www.cholyknight.com
Eevee Pouch
FRONT/BACK (A)
Cut 2 from pouch fabric
Cut 2 from lining fabric
P A T T E R N
NAP
(lining only)
MIDDLE (G2)
Cut 4 from yellow fabric
¼” seam allowance
applique placement
UMBREON EAR
BASE (G1)
NAP
placement
crown
en
¼” seam allowance
em
p lac
r
ea
ESPEON EAR
t
men
placidee fin placeme
TUFT (H2)
s zipper nt
Cut 4 from lavender fabric
¼” seam allowance
SY
LV
E
Cu ON
CR
H2
t
1 fr
om
pin OW
NAP
ab N
kf
ric (I
1)
NA
P
P
NA
1)
(D ic
BOW CENTER
br
fa N
vy W
(I4)
a
n O
om R
t 1 fr N C Cut 1 from pink fabric
Cu EO
R P
VA
pg. 2/3
TAB (J)
Cut 1 from lining fabric
¼” seam allowance
NAP NAP
NAP
Cut 2 from yellow fabric
¼” seam allowance
C
applique
placement
NAP
¼” seam allowance
(E2)
Cut 4 from green fabric
¼” seam allowance
LEAFEON EAR
NAP
BASE (E1)
Cut 4 from light yellow fabric
¼” seam allowance
D4
NAP
NAP
NAP
D2 D5
pg. 3/3
UMBREON PUPIL
applique
applique
trace & cut 2
black
brown, or teal from brown
¼” seam allowance
Cut 2 from teal fabric
CREST (F)
GLACEON HEAD
SH ON E
wh 2
fro ce & que
m cut
ite
PE
ES
ESPEON JEWEL
applique
trace & cut 1 from UMBREON RING
red applique
trace & cut 2
EYE SHINE
from white
NAP
fold line
ESPEON
EAR (H1)
Cut 2 from lavender fabric EEVEE EYE SYLVEON
Cut 2 from purple fabric applique INNER
¼” seam allowance trace & cut 2 EAR
from black
fr
tra om applique
c g
a e & ree trace & cut
SP ppliq cut n 2 from
LE RO ue 1
AF U blue
EO T
N
BASIC EYE
applique
trace & cut 1
each from black,
purple, red, teal, SYLVEON EYE
or brown applique
trace & cut 1
each from
turquoise