Product Simple Specification

1、Choice of driver , please choose the correct procedure to install,they are

some different driver in the driver disk.

a.The “0575-V9-network.exe” file is the Wireless single gamepad with Mini receiver

file . It is used for 2.4G wirless gamepad with Mini reciever and 2.4G wireless

XBOX 360 gamepad.

b.The “BM0581-network.exe” file is the Wireless 3 in 1 driver file.It is used for

Wireless 2.4G single gamepad with 3 in 1 receiver / bluetooth gamepad with

bluetooth mini riceiver / 301 transfer cable / PC360

c.The “0555_Twin_USB_Network_Gamepad_V12.exe” file is the Wireless double

gamepad driver file .It is uesd for Wireless 2.4G double gamepad with Mini

receiver .

d.The “0575-BM942-network.exe” file is used for 3in1 wired gamepad and PC360

wired gamepad.

e.The “Bluetooth gamepad special receiver.exe”file is used for bluetooth wired ga

mepad and bluetooth gamepad with mini receiver which has vibration function in P

C(gamepad has motors)

f.The “Xbox360_32chs.exe” file is used for gamepad which has PC360 function.

1
 NOTES:when install the driver according to the gamepad,if not successful

when test gamepad and no vibration and so on,please unstall the new driver and

install the old driver to test whether is ok.

2、Computer driver install instruction

PC Vibration driver install.

You can look for the product driver from the disk , double click to install it ,follow the

tips to finish the installation as shown in Diagram (1).

Picture （1）

PC360 DRIVER install(If the system above the WIN7 , no neeed to install. The

system under the WIN7, need to install the driver, if you don’t install the driver ,

PC360 can’t be used normally.)

You can look “【Xbox360_32chs.exe】”from the disk or Microsoft offical website,

double click to install it ,follow the tips to finish the installation as shown in Diagram

（2）.
2
 Picture（2）

3 、Uninstall driver

The driver has an uninstall program.Player can delete all files and program. Click

(START)-(CONTROL PANEL)-(ADD/DELETE) ,look for the installed

program ,uninstall and delete as shown in Diagram.

4、PC and PC360 Mode Switch (The product with PC360 Function)

Wireless 2.4G gamepad mode switch ( Press the HOME butto for 5 minutes after

wire connecting )

Blutooth gamepad mode switch ( Press the SELECT+START button for 5 minutes )

PC360 wired gamepad mode switch (Press the MODE button for 5 minutes after

the USB port connected. )

301 convert cable mode switch ( Press the MODE button two times after the USB

port connected.)

5、Product function test

Start testing set up interface with the following two mdthods :

3
 A .Double-Click the shortcut icon, (Game Controller) on the desktop as shown
in Diagram 2.
B.Click ( Start)-( Controller Panel )-( Game Controller ) Window as shown in
Diagram 3 would appear after the start of ( Game Controller )

（3）Game Controllers

Click (Properties) in (Game Controllers ) shown as Diagram 3 to start the test

interface as shown in Diagram 4.

（4）Test Interface

4
Test the controller’s functions of axis,buttons and point of view under ( Function

Test ) as shown in Diagram 4.

Under ( Calibration Function ) , the axis can be calibrated, Click ( Default ) the

buttons functions would return to initial state,while click ( Set ) the buttons functions

would turn to standard states as shown on Diagram 5.

（5） Calibration

Test the vibration function under ( Vibration Test ) as shown in Diagram 6.

PC360 function test ( Under the PC360 Mode )

Switch the mode to PC360 after connecting , Find the “【XBox 360 Controller

Test.exe】” from the disk,double click to open, test the function of gamepad as

shown in Diagram 7 :

6
 （7）PC360 test interface

6．Program Settings( Keyboard and Mouse setting , the function must be

with support driver . )

Mouse Keyboard Setup

Click “( Joy_Setup)” as shown in Diagram 2 or click the ( Mouse Keyboard Setup )

as shown in Diagram 7 under ( Vibration ) as shown in Diagram 4 to enter the

programming settings as shown in Diagram 8.

（8）

7
 ( Mouse ) ( refer to 1 in Diagram 9 )

（9）

“Mouse”(refer to 1 in Diagram（10) :

A:Select 【Leftjoystick】 and click【OK】 to replace the mouse function with the left

3D joystick of the gamepad(the directional buttons have the functions of mouse);

B:Select 【Right Joystick】 and click【OK】 to replace the mouse function with the

right 3D joystick of the gamepad.

C:Select 【None】 and click 【OK】 the sticks do not have Mouse function.

8
 （10）

“Key send”( refer to 2 in Diagram 10):

A. Select 【one by one】 and click 【OK】 to set the controller buttons to work only

one time when pressed.

B. Select 【Concurrent】 and click 【OK】 to set the controller buttons with turbo

function. ( The buttons work continuously when being pressed.)

“Mouse Slow Fast” ( refer to 3 in Diagram 10):

Click and drag the slider and click 【OK】to adjust the speed of Mouse function on

the controller.

To set the Keyboard and Mouse function to the gamepad buttons:

【Button map】, 【 Keyboard setup】 or 【 Clear】 in the drop-down list to set the

Keyboard and Mouse functions to the controller buttons.

1）“Mouse”set the Mouse key functions to the gamepad buttons.

2）“Button map”set the other buttons of the gamepad function to the selected

button.

3）“Keyboard setup”:set the Keyboard keys function to the selected controller

buttons.(Note: Each controller button can replace 16 Keyboard keys in

maximum.)

4）“Clear”: clear the replacement functions of the selected buttons.

For example: to set button【1】on the controller with the function of key【A】

of the Keyboard, first

select button【 1】 of the controller as shown on diagram 9. Second, select

【 Keyboard setup】 in the

drop-down list to enter the setting up interface as shown in diagram 11.

Then select 【A】on the

keyboard and click【OK】as shown in diagram 11.Then Button【1】of the

controller has the function of key【A】of the keyboard.

After setting, the button turn to green, and beside it are the keys of the

keyboard it can replace.(note:after finish all setting,click “OK”as shown in diagram

（11）.

10
 （11）

Click “Save” as shown in diagram 12 and diagram 13 to save the settings in “.pro”

file.

（12）

11
 （13）

Click“load”as shown in diagram 14 and diagram 15 can open and load the settings

“.pro”.

（14）

12
 （15）

Click “ClearAll” as shown in Diagram 16 all the buttons function

return to the default state.

（16）

13
7、Cautions:

A. Without installing the right driver, some of the gamepad functions may not work

properly.Please uninstall the existing driver and install the right driver

B. If any buttons do not work properly during games, please check the settings of the

gamepad.

C. all settings after finish,please make assure click “OK”.

D. The mini USB wireless receiver only works on computer,or the consoles it

supports;any other console is not noted, it cannot work.

E. Please set the gamepad before you start playing.

F. If there is no vibration during games, please check whether install driver、whether

open the game vibration function、if the game supports vibration.

G. after connecting the USB reveiver,if not recognized or no any function,please do

as follows:

H: change USB plug to connect.

I: The computer will prompt “To find new hardware” when you use this gamepad for

the first time, but after connecting,it will not happen again,then you can confirm

whether can connect.after you plug your wireless USB reveiver,please

click“Game Controller”to test.There is one data in the “Game Controller” if the

receiver is connected with gamepad;if not connected it is no any data.If

connected,you can Click 【Properties】in “Game Controllers”to start the test.

J: Check whether is connected by the gamepad and receiver(please follow up

“Wireless Transmission Connection”.

K: Restar your computer.

temperatures,high humidity or direct sunlight.

M: Do not let liquid or small particles to get into the gamepad.

N: Do not put heavy objects on the gamepad.

O: Never disassemble or modify the gamepad.

P: Do not bend, throw or drop the gamepad or subject it to the strong physical shock.

Q: When cleaning the gamepad, use a soft, dry cloth. Do not use paint thinner,

solvents or other chemicals.

R: Please keep far away from Children to avoid the accident standard brand

adapter to charger gamepad.

15