This document provides specifications for the SAT-630-TM035D-SO-N 3.5-inch TFT LCD module. It has a resolution of 320x240 pixels, works with both PAL and NTSC video signals, and has a brightness of less than 1W. The module includes a digital panel, PCB board, and power/video cable. It is intended for uses like visual doorbells, monitors, and measuring equipment.
This document provides specifications for the SAT-630-TM035D-SO-N 3.5-inch TFT LCD module. It has a resolution of 320x240 pixels, works with both PAL and NTSC video signals, and has a brightness of less than 1W. The module includes a digital panel, PCB board, and power/video cable. It is intended for uses like visual doorbells, monitors, and measuring equipment.
This document provides specifications for the SAT-630-TM035D-SO-N 3.5-inch TFT LCD module. It has a resolution of 320x240 pixels, works with both PAL and NTSC video signals, and has a brightness of less than 1W. The module includes a digital panel, PCB board, and power/video cable. It is intended for uses like visual doorbells, monitors, and measuring equipment.
This document provides specifications for the SAT-630-TM035D-SO-N 3.5-inch TFT LCD module. It has a resolution of 320x240 pixels, works with both PAL and NTSC video signals, and has a brightness of less than 1W. The module includes a digital panel, PCB board, and power/video cable. It is intended for uses like visual doorbells, monitors, and measuring equipment.
- Model No.:SAT-630-TM035D-SO-N - System: PAL/NTSC Automatic
1 1. INTRODUCTION
SAT-630-TM035D-SO-N TFT module is combined with SAT-630-035-54DS-C PCB board and
SAT035TM54DMR1-A0-01 LCD digital panel, support both PAL system and NTSC ,which can be automatically converted. The whole module use high light white LED as backlight, which has low consumption and disturbances. This TFT module can be used for visual doorbell, video telephony, automotive displays, portable DVD, instruments, meters and measuring equipment and etc.
2. MAIN PARAMETERS
TFT Brand TM digital panel
Resolution 320RGBX240 dot Valid display area 70.08(W)*52.56(H)(mm) Color style R.G.B. Beeline array Aspect ratio 4:3
Working voltage DC9-18V（standard：DC12V）
Working DC120mA±10mA voltage(DC12V) Signal system PAL/NTSC standard value：1.0 Vp-p Scope of video signal min value:0.5Vp-p input max value:2.0 Vp-p Startup time ≤1.8S Power consumption <1W Working temperature -20℃-60℃ scope Storage temperature -40℃-70℃ scope
2 3. PRODUCT PICTURE( JUST FOR REFERENCE)
4 . DIGRAM AND INTERFACE DEFINITION
4.1. PCB DIGRAM
3 4.2. INTERFACE DEFINITION
CN2: 4-wire leads out (PH specifications, 2.0mm space between) for power and video.
Pin Symbol Definitions
1 VCC 9V~18V Power Input
2 GND Power ground
3 GND Video ground
4 CVBS PAL/NTSC VIDEO Input
CN1: 6-wire leads out (PH specifications, 2.0mm space between),
used for potentiometer
Pin Symbol Definitions Resistance
1 COL- Chrominance VR (－) 10---50K
4 2 COL Chrominance VR
3 COL+ Chrominance VR(+)
4 BRT- Brightness VR(－)
5 BRT Brightness VR 10—50K
6 BRT+ Brightness VR(+)
4.3. STANDARD WIRING
SAT4253 SAT6253 cable（UL1007-24#）。
5. PACKING, TRANSPORT AND STORAGE
5.1 PACKING
Sample packing dimension: 120×120×40mm
Module cable :(SAT4253--250mm、SAT6253--250mm each 1pc) Large box of packing specifications: 430(L) ×340(W) ×270(H) mm Carton quantity: Thick brackets :48pcs Thin brackets:60pcs each separated by paper card
5.2 TRANSPORT AND STORAGE
To avoid transport during rain or snow days. Prohibit to store with chemical materials and wet things.
5 6. ATTENTION
☆The input voltage should not higher than the limitation voltage. ☆Distinguish the position of power line and video line, if connect contract, the board can be burn out easily. ☆The board is electronic product, so static electricity should be precaution during process 、 assembling、operate. ☆Panel is glass product, it should be careful when taken and put down, avoid breakage. ☆The PFC line connect between panel and PCB connect line, it is easily being break off or pull apart, so should be careful during process、assembling、operate. ☆when using, pay attention to the input impedance match of signal, on PCB board, the position of R18* 75 ohm is signal input impedance matching resistance,when exist this resistance ,it is 75 ohm signal input, when not, it is 50K high resistance input.
7. ANEL DECISION CRITERIA
7.1 TESTING CONDITION
Test distance: 35CM±5CM
View angle: Check when light on: ±5 degree; Outlook checking: ±45 degree. （ from screen surface 0 degrees away in vertical）
7.2 CIRCUMTANCES
Temp.: 23±5 degree
Humidity: 55±10 degree Brightness: Outlook check:600LUX； Lighting on: 300-500LUX
7.3 INSPECTION METHOD
Scratch: Inspect at 600LUX, from 30CM away, check in vertical (or left/right 45 degree), if no any scratches, then qualified.
6 Black dot: Compare LCD black dot with Dot investigation standard by eyes. White/color dot: Cover black dot investigation standard paper on the white dot or color dot, to check if the white/color dot is available.
7.4 INSPECTION STANDARD
Remark: 1. Diameter= (maximum minimum)/2
2. Total quantity of Black dot, White dot, Color dot: A+B≤4 ALLOWED AREA （mm） DIAMETER（ ） A area B area d≤0.2 Neglect Neglect
