Circuit Design Suite – Multisim & Ultiboard

Installation Guide

This guide provides detailed instructions to download, install and activate Multisim. The
same instructions apply if you are activating Ultiboard. Together, these two packages form
the Circuit Design Suite. There is a troubleshooting section towards the end of this guide to
provide initial guidance on how to resolve the most common installation problems.
This guide is made for version 11.0.2.

Before you start ........................................................................ 1

Getting the software ................................................................. 2
Installing the software............................................................... 4
Activating the software ........................................................... 13
Activating Ultiboard ............................................................ 20
Creating a ghost image to replicate a lab.............................. 20
Troubleshooting ...................................................................... 21
Contacts .................................................................................. 22

Before you start

There are two items you must have ready before installing the software:

 License file(s) provided by PLTW

These are “.lc” files specific to the software and version you are installing (e.g.
Multisim_Edu_PKG_110002.lc for Multisim 11.0.2), if you are going to activate
Ultiboard you will need an additional license file for it. These license files either came
with your PLTW package or were sent by email from PLTW. If you don’t have one, you
must contact PLTW directly to get one (see Contacts).

 Serial number(s) provided by PLTW

Serial numbers to use in National Instruments products follow the format of
A##A##### where A refers to an alphabetic character, and # refers to a numeric digit.
Multisim and Ultiboard use different serial numbers.
Getting the software
The Circuit Design Suite installer includes both Multisim and Ultiboard software packages. It is
readily available in the National Instruments evaluation website.
Its size is large for a typical web download (~550 MB) so in order to download the installer you
first get a “downloader” application. This downloader will manage the file download of the full
installer, it can effectively manage slowdowns in the internet connection as well as timeouts or
other problems. If a download stopped, it will resume where it left when the download
connection is available again.

 Get the downloader from the following URL:

http://ftp.ni.com/evaluation/labview/ekit/other/downloader/NI_Circuit_Design_Suite_
11_0_2_Education_downloader.exe

 You may click Run so that it runs as soon as it finishes downloading.

 When the download has completed, it will launch and Windows may give you a warning,
click Run if that’s the case.

2
 The downloader application will ask you for the location to save the full installer of the
Circuit Design Suite, pick a location and click Save.

 The downloader will now initiate the download and provide you with a progress bar,
estimated time and the ability to hide, pause or cancel the download. Just let it work, in
a fast-speed connection it takes about 15 minutes to complete.

3
  When it completes the download, you may click Open to start the installation process.

Installing the software

The full installer you just downloaded is a self-extract executable; it will first unzip the
compressed files and then launch the setup process.

 When the installer has launched, the first dialog explains the process. Click OK when you
have read the message.

 The WinZip Self-Extractor utility starts, we recommend you leave all the defaults and
click Unzip. The installers will run setup.exe when finished decompressing the files.

4
 It takes just about a minute to decompress all files. Click OK to continue.

 The setup program starts and you see the welcome screen for the installer. Click Install
NI Circuit Design Suite 11.0.2 to begin.

5
 If User Account Control (UAC) is enabled in Windows you may click Yes to proceed.

 Start by completing the User Information, you need your Full Name, your School or
Institution, and the Serial Number provided by PLTW. Click Next to continue.

6
 Review the destination directory; we suggest you accept the default location. Click Next
to continue.

7
 If you are using the NI ELVIS or NI myDAQ platforms, you may leave the defaults in the
Features window; however, if you will NOT be using these hardware platforms, select
Do not install NI ELVISmx from the features list. Click Next to continue.

8
 The 11.0.2 release is the last update for the 11.0.x version series. In the Product
Notifications window you may un-check the box so that the installer does not contacts
NI for updates. Click Next to continue.

9
 You must now accept several license agreements (EULA) included in Circuit Design Suite.
Select I accept the License Agreement and click Next, repeat in the following window as
well.

10
 Review the installation configuration and click Next to start.

 The installer may take between 5 and 10 minutes to complete. Progress information is
displayed for the user.

11
  When the installer completes, click Finish.

 You are now prompted to restart the computer. Click Restart. After a restart is
completed you will be able to activate the software.

You no longer need the Downloader application, you may delete if you saved it in a particular
directory. The full installer is located by default in C:\National Instruments Downloads
you may also delete it, although we strongly suggest you back-up this installer for future
changes.

12
Activating the software
For PLTW software, there are two items needed to activate the software, the serial number and
the license file. You will use both in this section.

Once Windows has restarted you can now activate the software.

 Launch NI License Manager, is located in Start » Programs » National Instruments » NI

License Manager.

13
  The .lc file you received from PLTW must be drag-and-dropped over the License
Manager left-side panel, where you see Multisim and Ultiboard listed. Or you can go to
Options » Install License File and select the license file for the product you wish to
activate.

 You will receive a warning about an existing license file, you want to overwrite it. Click
Yes to do so.

If you are planning to replicate an image of a master computer in a lab setting you may skip
now to section Creating a ghost image to replicate a lab.

14
 In the License Manager window you can now select the software to activate. Expand the
hierarchy tree for the local licenses until you see the Education Edition. Then right-click
that label and select Activate.

 In the Activation Wizard, select the first option Automatically activate through a secure
Internet connection and click Next.

15
NOTE: If you do not have an internet connection, or if you have a network firewall that prevents
you from accessing the internet please consult the Troubleshooting section for more
information.

 Verify the serial number to activate, it must match the serial number provided by PLTW.
Please beware of alphabet character O versus numeric digit 0. Click Next to continue.

16
 Fill in your first name, last name and school or institution. You may uncheck the
register box if you do not wish to provide all the details. Click Next to continue.

 Please fill in your email address and check the box. NI will send you an email with the
activation information. Click Next to continue.

17
 The Activation Wizard will communicate to the NI Licensing Server.

 If communication is successful you will receive the message Product Successfully

Activated! Click Finish to complete this process.

18
 You may review now your activation information in NI License Manager. In the following
screenshot the serial number has been redacted.

 When you launch Multisim from Start » Programs » National Instruments » Circuit
Design Suite » Multisim you will receive a dialog indicating the remaining days for your
license to expire, as well as give you the option to not display this reminder until 7 days
prior to expiration date. Click OK to continue past this dialog.

19
Activating Ultiboard
To activate Ultiboard (or other NI software) repeat the Activation process again, but now
include the license file and use the serial numbers where applicable for the other software.

Creating a ghost image to replicate a lab

If you want to replicate a ghost image of a master computer instead of individually installing
multiple seats, you can do so by following the instructions in the following Knowledge Base
from the ni.com website:

KB 5GTELLQC: How can I Change the Hardware Used for Activation of NI Software?

A regular activation is based in a computer ID taken from the MAC address of the computer. In
order to create an image of a computer for deployment, you need to switch this computer ID to
use instead the disk volume serial number.

You will need to activate your software with a new activation code obtained from NI.

Follow the instructions in the KB to obtain the necessary information and to contact NI for the
activation code. Please be aware, that is not guaranteed you will be eligible for this option,
changing the computer ID for activation is handled in a case-by-case basis by NI. However,
when contacting NI indicate that you are a PLTW school.

20
Troubleshooting
Here is a list of the most common problems, if you are still unable to activate contact PLTW.

Problem How to fix it

Verify that you have installed the corresponding

license file for the product you are activating; you
must have received this license file from PLTW.

The license file name for Multisim 11.0.2 is:

Multisim_Edu_PKG_110002.lc. While the
license file for Multisim 11.0.1 is:
Multisim_Edu_PKG_110001.lc.

I receive a “serial number” error from the In License Manager you can check which version of
Activation Wizard. the software you installed. You may have
downloaded the wrong version.

Verify that there are no typos in the serial number

(e.g. alphabet character O vs. numeric digit 0).

Verify that you are using a PLTW provided serial

number.

If your network is behind a firewall you’ll need to

contact your IT department to allow TCP/IP access
to the following processes:
 lmgrd.exe
 nilm.exe

If you are running a personal firewall you may also

need to allow:
I receive a “cannot communicate” error message  lmreread.exe
from the Activation Wizard.
If using FLEXnet to manage your licenses instead of
NI License Manager, then also allow:
 lmdown.exe

By default License Manager uses port 27000.

Verify that you have internet access.

21
 You may see duplicate Education Edition labels if
you are using a license file such as:
247932_Multisim_Edu_PKG_110001.lc

I see duplicate “Education Edition” labels in the If this is the case, make sure to right-click above
licenses hierarchy tree in License Manager. one of the “Education Edition” labels and activate,
if that one did not worked, try the other one.

It is important to right-click on top of the

“Education Edition” label.

Automatic activation through an Internet

connection is preferred.

In case you don’t have any internet access, you

Do I need Internet access to activate? may select another option to active from the
Activation Wizard when you launch it.

You can activate using a web browser, email client,

telephone, or even a fax machine.

Contacts
If you are missing the license files, the serial number, are having trouble activating the
software, or general support requests, please contact PLTW:

[email protected]

For general Multisim or Ultiboard Support, you may visit ni.com/ask to browse the Knowledge
Base, Tutorials, and Discussion Forums.

22